]> git.karo-electronics.de Git - karo-tx-linux.git/shortlog
karo-tx-linux.git
2014-04-30 Shawn GuoMerge branch 'imx/dt' into for-next
2014-04-30 Lucas StachARM: dts: imx6: update pcie to bring in line with new...
2014-04-30 Alexander ShiyanARM: i.MX: Fix eMMa PrP resource size
2014-04-30 Shawn GuoARM: imx_v4_v5_defconfig: drop CONFIG_COMMON_CLK_DEBUG...
2014-04-30 Alexander ShiyanARM: i.MX27 clk: Remove clk_register_clkdev() for unuse...
2014-04-30 Alexander ShiyanARM: i.MX27 clk: Add missing clocks for MSHC and RTIC
2014-04-30 Shawn GuoARM: imx6q: add the missing esai_ahb clock
2014-04-30 Shawn GuoARM: imx: add shared gate clock support
2014-04-30 Shawn GuoARM: imx: lock is always valid for clk_gate2
2014-04-30 Shawn GuoARM: imx: define struct clk_gate2 on our own
2014-04-30 Alexander ShiyanARM: i.MX: Remove #ifdef CONFIG_OF
2014-04-30 Shawn GuoARM: imx_v6_v7_defconfig: enable option CONFIG_LOCALVER...
2014-04-30 Shawn GuoARM: imx: drop CONFIG_MMC_UNSAFE_RESUME from defconfig
2014-04-30 Iain PatonARM: imx6: clk: i.MX6 DualLite/Solo i2c4 clock
2014-04-30 Shawn GuoARM: imx_v6_v7_defconfig: enable cpufreq and CMA support
2014-04-30 Denis CarikliARM: imx_v6_v7_defconfig: Enable drivers for i.MX51...
2014-04-30 Denis CarikliARM: imx_v6_v7_defconfig: Add more drm drivers.
2014-04-30 Fabio EstevamARM: mxs_defconfig: Select CONFIG_CRYPTO_DEV_MXS_DCP
2014-04-30 Gilles ChanteperdrixARM: imx: factor device tree timer initialization
2014-04-30 Fabio EstevamARM: imx: Remove mx51_babbage board file
2014-04-30 Philipp ZabelARM: i.MX5: Remove outdated VPU clock lookups
2014-04-30 Denis CarikliARM: imx_v4_v5_defconfig: Enable drivers for i.MX25...
2014-04-30 Alexander ShiyanARM: i.MX: mx21ads: Cleanup board
2014-04-30 Alexander ShiyanARM: i.MX: mx21ads: Use fixed voltage regulator for...
2014-04-30 Stefan AgnerARM: vf610: add UART choice for low-level debug
2014-04-30 Alexander ShiyanARM: i.MX: mx21ads: Replace direct handling of peripher...
2014-04-30 Fabio EstevamARM: dts: imx53-qsb-common: Add TVE support
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Fix "reg" property...
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add CSI enable...
2014-04-30 Alexander ShiyanARM: dts: imx: Remove excess entries for PMIC
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Disable PM pins...
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Fix active level...
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Remove duplicate...
2014-04-30 Tim HarveyARM: dts: ventana: Add HDMI support
2014-04-30 Marek VasutARM: dts: imx6qdl-sabresd: Add PCIe support
2014-04-30 Fabio EstevamARM: dts: imx6qdl-wandboard: Add HDMI support
2014-04-30 Fabio EstevamARM: dts: imx6qdl-sabresd: Add HDMI support
2014-04-30 Fabio EstevamARM: dts: imx27-pdk: Add keypad support
2014-04-30 Fabio EstevamARM: dts: imx27-pdk: Add NAND support
2014-04-30 Philipp ZabelARM: dts: imx6q-gk802: Enable HDMI
2014-04-30 Fabio EstevamARM: dts: imx27-pdk: Add USB OTG support
2014-04-30 Fabio EstevamARM: dts: imx27: Place the usb phy nodes in the board...
2014-04-30 Fabio EstevamARM: dts: imx27: Use the correct usb clock gate
2014-04-30 Fabio EstevamARM: dts: imx27-phytec-phycore-som: Move PMIC IRQ GPIO...
2014-04-30 Fabio EstevamARM: dts: imx27-pdk: Add PMIC support
2014-04-30 Alexander ShiyanARM: dts: imx51-babbage: Use predefined constants for...
2014-04-30 Alexander ShiyanARM: dts: imx51-babbage: Add devicetree node for I2C1
2014-04-30 Alexander ShiyanARM: dts: imx51-babbage: Sort nodes by name
2014-04-30 Alexander ShiyanARM: dts: imx51-babbage: Add USB OTG regulator node
2014-04-30 Alexander ShiyanARM: dts: imx51-babbage: Use predefined constants for...
2014-04-30 Alexander ShiyanARM: dts: imx51-babbage: Add missing pingroup for PMIC
2014-04-30 Alexander ShiyanARM: dts: imx51-babbage: Move "hog" pins into correspon...
2014-04-30 Alexander ShiyanARM: dts: i.MX51: Allow to define partitions onto NFC
2014-04-30 Philipp ZabelARM: dts: pbab01: Enable DVI
2014-04-30 Philipp ZabelARM: dts: pbab01: Enable UART1
2014-04-30 Philipp ZabelARM: dts: pfla02: Add UART1 (uart3)
2014-04-30 Philipp ZabelARM: dts: pbab01: Add I2C devices
2014-04-30 Philipp ZabelARM: dts: pbab01: Add I2C2 and I2C3
2014-04-30 Philipp ZabelARM: dts: pbab01: Set linux,stdout-path to UART4
2014-04-30 Philipp ZabelARM: dts: pfla02: PHY reset is active-low
2014-04-30 Philipp ZabelARM: dts: pfla02: Add GPIO LEDs
2014-04-30 Philipp ZabelARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo
2014-04-30 Philipp ZabelARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
2014-04-30 Fabio EstevamARM: dts: imx27-pdk: Pass the FEC pin configuration
2014-04-30 Fabio EstevamARM: dts: imx27-pdk: Pass the UART1 pin configuration
2014-04-30 Fabio EstevamARM: dts: imx27-pdk: Keep the dt nodes sorted
2014-04-30 Alexander ShiyanARM i.MX51: Add Digi ConnectCore devicetree
2014-04-30 Alexander ShiyanARM: dts: i.MX: Use single naming style for i.MX WEIM...
2014-04-30 Denis CarikliARM: dts: cpuimx51 Add touchscreen support.
2014-04-30 Denis CarikliARM: dts: cpuimx35 Add touchscreen support.
2014-04-30 Denis CarikliARM: dts: mbimxsd51 baseboard: Add USB support.
2014-04-30 Stefan AgnerARM: dts: add initial Colibri VF61 board support
2014-04-30 Stefan Agnerof: add vendor prefix for Toradex AG
2014-04-30 Fabio EstevamARM: dts: imx27-pdk: Pass the memory range
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add display control...
2014-04-30 Michael HeimpoldARM: dts: imx28-duckbill: use symbolic names from gpio.h
2014-04-30 Michael HeimpoldARM: dts: imx28-duckbill: fix phy reset gpio
2014-04-30 Michael HeimpoldARM: dts: imx28: include gpio.h to allow use of symboli...
2014-04-30 Michael HeimpoldARM: dts: imx28-duckbill: fix mmc settings
2014-04-30 Fabio EstevamARM: dts: imx51-babbage: Add USB OTG support
2014-04-30 Fabio EstevamARM: dts: imx51-babbage: Add USB Host1 support
2014-04-30 Fabio EstevamARM: dts: imx35-pdk: Add initial device tree support
2014-04-30 Xiubo LiARM: dts: vf610-twr: Enables FTM PWM device.
2014-04-30 Xiubo LiARM: dts: vf610-twr: Add PWM0's pinctrl node
2014-04-30 Xiubo LiARM: dts: vf610: Add Freescale FTM PWM node.
2014-04-30 Philipp ZabelARM: dts: i.MX53: Add reset line to VPU device node
2014-04-30 Philipp ZabelARM: dts: i.MX53: Enable CODA7541 VPU
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Add USB Host1 support
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add display support
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Add CAN support
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Add keypad support
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Add audio support
2014-04-30 Fabio EstevamARM: mx25: Add CLKO support
2014-04-30 Denis CarikliARM: dts: mbimxsd35 baseboard: Add USB support.
2014-04-30 Denis CarikliARM: dts: i.MX35: Add USB support.
2014-04-30 Denis CarikliARM: dts: mbimxsd25 baseboard: Add USB support
2014-04-30 Fabio EstevamARM: dts: imx25.dtsi: Fix USB support.
2014-04-30 Fabio EstevamARM: dts: mx35: USB block requires only one clock
2014-04-30 Fabio EstevamARM: dts: mx25: USB block requires only one clock
2014-04-30 Cosmin StoicaARM: dts: vf610-twr: Add support for sdhc1
next