]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2012-07-07 Vipin KUMARSPEAr: Add basic arch related support for SPEAr SoCs
2012-07-07 Vipin KumarSPEAr: Add interface information in initialization
2012-07-07 Vipin KUMARSPEAr: Add macb driver support for spear310 and spear320
2012-07-07 Vipin KUMARSPEAr: Configure network support for spear SoCs
2012-07-07 Vipin KUMARSPEAr: Place ethaddr write and read within CONFIG_CMD_NET
2012-07-07 Amit VirdiSPEAr: Eliminate dependency on Xloader table
2012-07-07 Amit VirdiSPEAr: Fix ARM relocation support
2012-07-07 Armando Viscontist_smi: Fixed page size for Winbond W25Q128FV flash
2012-07-07 Amit Virdist_smi: Change timeout loop implementation
2012-07-07 Armando Viscontist_smi: Fix bug in flash_print_info()
2012-07-07 Armando Viscontist_smi: Change the flash probing method
2012-07-07 Armando Viscontist_smi: Removed no needed dependency on ST_M25Pxx_ID
2012-07-07 Vipin Kumarst_smi: Fix smi read status
2012-07-07 Shiraz Hashimst_smi: Move status register read before modifying...
2012-07-07 Vipin KUMARst_smi: Read status until timeout happens
2012-07-07 Amit Virdist_smi: Enhance the error handling
2012-07-07 Amit Virdist_smi: Change SMI timeout values
2012-07-07 Amit Virdist_smi: Return error in case TFF is not set
2012-07-07 Vipin KUMARst_smi: Add support for SPEAr SMI driver
2012-07-07 Vipin KUMARmtd/NAND: Remove obsolete SPEAr specific NAND drivers
2012-07-07 Vipin KUMARSPEAr: Configure FSMC driver for NAND interface
2012-07-07 Vipin KUMARmtd/NAND: Add FSMC driver support
2012-07-07 Holger Brunckarm/km: remove calls to kw_gpio_* in board_early_init_f
2012-07-07 Thomas Herzmannarm/km: add implementation for read_dip_switch
2012-07-07 Valentin Longchamparm/km: support the 2 PCIe fpga resets
2012-07-07 Valentin Longchamparm/km: skip FPGA config when already configured
2012-07-07 Valentin Longchamparm/km: redefine piggy 4 reg names to avoid conflicts
2012-07-07 Holger Brunckarm/km: cleanup km_kirkwood boards
2012-07-07 Valentin Longchamparm/km: enable BOCO2 FPGA download support
2012-07-07 Holger Brunckarm/km: remove portl2.h and use km_kirkwood instead
2012-07-07 Holger Brunckarm/km: convert mgcoge3un target to km_kirkwood
2012-07-07 Holger Brunckarm/km: add kmcoge5un board support
2012-07-07 Holger Brunckarm/km: add kmnusa board support
2012-07-07 Tetsuyuki Kobayashiarm: bugfix: save_boot_params_default accesses uninital...
2012-07-07 Nikita Kiryanovcm-t35: fix incorrect NAND_ECC layout selection
2012-07-07 SRICHARAN RARM: OMAP4/5: Do not configure non essential pads,...
2012-07-07 SRICHARAN RARM: OMAP4/5: Move USB pads to essential list.
2012-07-07 SRICHARAN RARM: OMAP4/5: Move USB clocks to essential group.
2012-07-07 SRICHARAN RARM: OMAP4/5: Move gpmc clocks to essential group.
2012-07-07 SRICHARAN RARM: OMAP4+: Move external phy initialisations to arch...
2012-07-07 Sebastien Janomap4: Use a smaller M,N couple for IVA DPLL
2012-07-07 Rajashekhara... da850/omap-l138: Enable auto negotiation in RMII mode
2012-07-07 Steve Sakomanomap: am33xx: accomodate input clocks other than 24 Mhz
2012-07-07 Steve Sakomanomap: emif: fix bug in manufacturer code test
2012-07-07 Steve Sakomanomap: emif: deal with rams that return duplicate mr...
2012-07-07 Lokesh VutlaOMAP4+: Force DDR in self-refresh after warm reset
2012-07-07 Lokesh VutlaOMAP4+: Handle sdram init after warm reset
2012-07-07 Lokesh VutlaARM: OMAP3+: Detect reset type
2012-07-07 Tetsuyuki Kobayashiarm: bugfix: Move vector table before jumping relocated...
2012-07-07 Marek VasutKirkwood: Add support for Ka-Ro TK71
2012-07-07 Valentin Longchamparm/km: use spi claim bus to switch between SPI and...
2012-07-07 Valentin Longchamparm/kirkwood: protect the ENV_SPI #defines
2012-07-07 Simon GuinotARM: don't probe PHY address for LaCie boards
2012-07-07 Simon Guinotlacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2
2012-07-07 Simon Guinotlacie_kw: fix SDRAM banks number for net2big_v2
2012-07-07 Michael WalleKirkwood: add lschlv2 and lsxhl board support
2012-07-07 Michael Wallenet: add helper to generate random mac address
2012-07-07 Michael Wallenet: use common rand()/srand() functions
2012-07-07 Michael Wallelib: add rand() function
2012-07-07 Luka Perkovkwboot: boot kirkwood SoCs over a serial link
2012-07-07 Valentin Longchampkw_spi: add weak functions board_spi_claim/release_bus
2012-07-07 Valentin Longchampkw_spi: support spi_claim/release_bus functions
2012-07-07 Valentin Longchampkw_spi: backup and reset the MPP of the chosen CS pin
2012-07-07 Valentin Longchampkirkwood: fix calls to kirkwood_mpp_conf
2012-07-07 Valentin Longchampkirkwood: add save functionality kirkwood_mpp_conf...
2012-07-07 Valentin Longchampkm_arm: use filesize for erase in update command
2012-07-07 Valentin Longchamparm/km: enable mii cmd
2012-07-07 Holger Brunckarm/km: remove CONFIG_RESET_PHY_R
2012-07-07 Holger Brunckarm/km: change maintainer for mgcoge3un
2012-07-07 Holger Brunckarm/km: fix wrong comment in SDRAM config for mgcoge3un
2012-07-07 Holger Brunckarm/km: use ARRAY_SIZE macro
2012-07-07 Holger Brunckarm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE
2012-07-07 Holger Brunckarm/km: add piggy mac adress offset for mgcoge3un
2012-07-07 Holger Brunckarm/km: add board type to boards.cfg
2012-07-07 Alexandre BelloniAT91SAM9*: Change kernel address in dataflash to match...
2012-07-07 Bo ShenATMEL/PIO: Enable new feature of PIO on Atmel device
2012-07-07 Andreas Bießmannehci-atmel: fix compiler warning
2012-07-07 Bo ShenAT91: at91sam9m10g45ek : Enable EHCI instead OHCI
2012-07-07 Bo ShenAtmel : usb : add EHCI driver for Atmel SoC
2012-07-07 esw@bus-elektronik.deFix: AT91SAM9263 nor flash usage
2012-07-07 esw@bus-elektronik.deFix: broken boot message at serial line on AT91SAM9263...
2012-07-07 Michael Langeri.MX6 USDHC: Use the ESDHC clock
2012-07-07 Fabio Estevammx28evk: Fix boot by adjusting HW_DRAM_CTL29 register
2012-07-07 Marek Vasuti.MX28: Add function to adjust memory parameters
2012-07-07 Fabio Estevammx28evk: Fix PSWITCH key position
2012-07-07 Fabio Estevammx53smd: Remove CONFIG_SYS_I2C_SLAVE definition
2012-07-07 Fabio Estevammx53loco: Remove CONFIG_SYS_I2C_SLAVE definition
2012-07-07 Fabio Estevammx53evk: Remove CONFIG_SYS_I2C_SLAVE definition
2012-07-07 Fabio Estevammx53ard: Remove CONFIG_SYS_I2C_SLAVE definition
2012-07-07 Fabio Estevammx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition
2012-07-07 Fabio Estevamimx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition
2012-07-07 Fabio Estevammx53ard: Remove unused CONFIG_MII_GASKET
2012-07-07 Vikram Narayananmx6: Avoid writing to read-only bits in imximage.cfg
2012-07-07 Otavio Salvadorm28evk: use same notation to alloc the 128kB stack
2012-07-07 Otavio Salvadorm28evk: drop duplicated definition of CONFIG_OF_LIBFDT
2012-07-07 Otavio Salvadormx28evk: fix board config include guardian macro name
2012-07-07 Otavio Salvadormx28evk: ensure command definition is in alphabetic...
2012-07-07 Otavio Salvadorm28evk: fix board config include guardian macro name
2012-07-07 Otavio SalvadorMX28: Fix a typo in mx28_reg_8 macro
2012-07-07 Fabio Estevammx6qsabrelite: Remove unused SOBJS
next