]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2015-09-08 Stephen Warrenusb: dwc2: simplify wait_for_chhltd
2015-09-08 Stephen Warrenusb: dwc2: remove control_data_toggle[]
2015-09-08 Stephen Warrenusb: dwc2: usb chunk_msg() for control transfers too
2015-09-08 Stephen Warrenusb: dwc2: refactor submit_bulk_msg to be common
2015-09-08 Stephen Warrenusb: dwc2: unify waiting for transfer completion
2015-09-08 Tim Harveyusb: hub: allow pgood_delay to be specified via env
2015-09-08 Stephen Warrenusb: fix first descriptor fetch error handling
2015-09-08 Paul Kocialkowskiusb: Early failure when the first descriptor read fails...
2015-09-08 Paul Kocialkowskiusb: Check usb_new_device for failure
2015-09-08 Paul Kocialkowskiusb: usb_new_device return codes consistency
2015-09-08 Sergey Temerkhanovusb_storage:Fix USB storage capacity detection on 64...
2015-09-08 Sergey Temerkhanovusb: 64-bit architectures support for xHCI
2015-09-08 Sergey Temerkhanovusb: Convert protocol header structures to use explicit...
2015-09-08 Thierry Redingusb: mass-storage: Build warning fixes for 64-bit
2015-09-08 Thierry Redingusb: ehci-tegra: Build warning fixes for 64-bit
2015-09-08 Rob Herringehci-hcd: fix warnings on 64-bit builds
2015-09-08 Rob Herringusb: ci_udc: fix warnings on 64-bit builds
2015-09-08 Thierry Redingusb: eth: asix: Build warning fixes for 64-bit
2015-09-08 Franck Jullienusb_storage : scan all interfaces to find a storage...
2015-09-08 Masahiro Yamadageneric-board: select SYS_GENERIC_BOARD for some archit...
2015-09-08 Nishanth MenonARM: Introduce erratum workaround for 798870
2015-09-08 Masahiro YamadaREADME: remove description about driver model configura...
2015-09-08 angelo@sysam.itm68k: add generic-board support
2015-09-08 Michal Simekarm64: Add Xilinx ZynqMP support
2015-09-08 Masahiro YamadaARM: UniPhier: move SoC sources to mach-uniphier
2015-09-08 Fabio Estevammx31ads: Convert to generic board
2015-09-08 Masahiro YamadaARM: davinci: remove hawkboard support
2015-09-08 Masahiro YamadaARM: remove tnetv107x board support
2015-09-08 Masahiro YamadaARM: remove dkb board support
2015-09-08 Masahiro YamadaARM: remove jadecpu board support
2015-09-08 Masahiro Yamadakconfig: remove unneeded dependency on !SPL_BUILD
2015-09-08 Masahiro Yamadakconfig: switch to single .config configuration
2015-09-08 Simon Glasskconfig: Adjust ordering so that defaults work as expected
2015-09-08 Volodymyr Riazantsevmmc: fsl_esdhc: Add support for DDR mode
2015-09-08 Masahiro YamadaARM: keystone: move SoC sources to mach-keystone
2015-09-08 Masahiro YamadaARM: orion5x: move SoC sources to mach-orion5x
2015-09-08 Masahiro YamadaARM: nomadik: move SoC sources to mach-nomadik
2015-09-08 Masahiro YamadaARM: kirkwood: move SOC sources to mach-kirkwood
2015-09-08 Masahiro YamadaARM: tegra: collect SoC sources into mach-tegra
2015-09-08 Simon Glassdm: cros_ec: Convert to Kconfig
2015-09-08 Peng FanARM: imx6: disable bandgap self-bias after boot
2015-09-08 Peng Fandm:gpio:mxc add DT support
2015-09-08 Peng Fandm:gpio:mxc add a bank_index entry in platdata
2015-09-08 Nikita Kiryanovlcd: split configuration_get_cmap
2015-09-08 Graeme Russarm: mxs: Add debug outputs and comments to mxs SPL...
2015-09-02 Lothar Waßmannfdt_support: add missing #ifdef after merge
2015-09-02 Lothar Waßmanncommon/board_f: add missing #endif after merge
2015-09-02 Lothar WaßmannKconfig: define missing symbol SPI and make DM_SPI...
2015-09-02 Lothar WaßmannKconfig: change CONFIG_MX* to CONFIG_SOC_MX*
2015-09-01 Nikolay Dimitrovmx6sabresd: Enable video interfaces in bootargs
2015-09-01 Tim Harveythermal: imx_thermal: use CPU temperature grade for...
2015-09-01 Tim Harveyimx: mx6: add display of CPU temperature grade in print...
2015-09-01 Tim Harveyimx: mx6: add get_cpu_temp_grade to obtain cpu temperat...
2015-09-01 Tim Harveyimx: mx6: display max cpu frequency in print_cpuinfo()
2015-09-01 Tim Harveyimx: mx6: add get_cpu_speed_grade_hz func to return...
2015-09-01 Tim Harveymx6: add OTP bank1 registers
2015-09-01 Tim Harveyarm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit...
2015-09-01 Prabhakar Kushwahaarm/imx-common: Fix warning 'get_reset_cause' defined...
2015-09-01 Peng Fanpmic: pfuze100 fix typo
2015-09-01 Peng Fanimx: mx6sx enable SION for i2c pin mux
2015-09-01 Nikolay Dimitrovimx: marsboard: Enable thermal DM support
2015-09-01 Nikolay Dimitrovimx: riotboard: Enable thermal DM support
2015-09-01 Nikolay Dimitrovimx: riotboard, marsboard: Enable thermal support
2015-09-01 Fabio Estevamhummingboard: Remove unused directory
2015-09-01 Tim Harveyimx: ventana: add pmic_setup to SPL
2015-09-01 Tim Harveyimx: ventana: (cosmetic) clean up size defines for...
2015-09-01 Tim Harveyimx: ventana: config: use MMC SPL RAW support
2015-09-01 Tim Harveyenv_nand: use nand_spl_load_image for readenv if SPL
2015-09-01 Tim Harveyimx: ventana: use stack relocation
2015-09-01 Tim Harveyimx: ventana: add GSC boot watchdog disable to SPL
2015-09-01 Tim Harveyimx: ventana: add gpio setup to SPL
2015-09-01 Tim Harveyimx: ventana: use common uart and i2c setup functions...
2015-09-01 Tim Harveyimx: ventana: detect pmic using i2c probe instead of...
2015-09-01 Tim Harveyimx: ventana: move GSC boot watchdog disable function...
2015-09-01 Tim Harveyimx: ventana: split out common functions between SPL...
2015-09-01 Tim Harveyimx: ventana: default msata/pci mux to pci before PCI...
2015-09-01 Tim Harveyimx: ventana: fix pcie reset for GW522x
2015-09-01 Tim Harveyimx: ventana: config: enable Thermal support
2015-09-01 Tim Harveyimx: ventana: enable DM_SERIAL
2015-09-01 Tim Harveyimx: ventana: register gpio's with gpio_request
2015-09-01 Tim Harveyimx: ventana: config: enable driver model
2015-09-01 Tim Harveyimx: ventana: config: enable gpio command
2015-09-01 Tim Harveyimx: ventana: display SPL boot device
2015-09-01 Tim Harveyimx: ventana: set dtype env var to boot media
2015-09-01 Nikolay Dimitrovarm: mx6: ddr3: Remove dead code
2015-09-01 Heiko Schocheri2c, mxc: rework i2c base address names for different...
2015-09-01 Heiko Schocherarm, imx6, i2c: add I2C4 for MX6DL
2015-09-01 Fabio Estevammx6: Set shared override bit in PL310 AUX_CTRL register
2015-09-01 Soeren Mochtbs2910: add CONFIG_SUPPORT_EMMC_BOOT
2015-09-01 Soeren Mochtbs2910: use default CONFIG_SYS_PBSIZE
2015-09-01 Soeren Mochtbs2910: only enable vga output for stdout/stderr when...
2015-09-01 Soeren Mochtbs2910: support for usb otg host mode
2015-09-01 Fabio Estevamwarp: README: Fix typo
2015-09-01 Tim Harveyimx: ventana: fix boot to SD
2015-09-01 Ulises Cardenasimx: dek_blob: Add explicit include for mapmem
2015-09-01 Brecht Neyrinckbugfix i.mx6 pwm: prevent overflow of period_c * duty_ns
2015-09-01 Fabio Estevammx6cuboxi: Mention Cubox-i in the README
2015-09-01 Fabio Estevamhummingboard: Remove mx6solo specific support
2015-09-01 Fabio Estevammx6cuboxi: Skip usb initialization when booting without...
2015-09-01 Fabio Estevammx6cuboxi: Pull down PAD_ENET_RXD0/RXD1
next