]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2008-03-26 Dave Liuata: merge the ata_piix driver
2008-03-26 Wolfgang DenkCoding style cleanup.
2008-03-26 Joakim TjernlundAdd CFG_RTC_DS1337_NOOSC to turn off OSC output
2008-03-26 Wolfgang DenkCleanup coding style, update CHANGELOG
2008-03-26 Wolfgang DenkMerge branch 'master_merge_new-image' of /home/tur...
2008-03-26 Wolfgang DenkREADME: update documentation (availability, links,...
2008-03-26 Bartlomiej... Merge branch 'new-image' of git://www.denx.de/git/u...
2008-03-26 Aras VaichasUSB Storage, add meaningful return value
2008-03-26 Anton Vorontsov83xx/fdt_support: let user specifiy FSL USB Dual-Role...
2008-03-26 Anton Vorontsovtsec: fix link detection for the RTL8211B PHY
2008-03-26 Anton Vorontsovmpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
2008-03-26 Joe D'AbbraccioModified the DDR SDRAM clock control register to delay...
2008-03-26 Scott Woodmpc83xx: Set PCI I/O bus-address base to zero.
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: add dhcp command
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: configure pario pins for AD7843...
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: add support for NAND
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
2008-03-26 Anton Vorontsovuec: add support for Broadcom BCM5481 Gigabit PHY
2008-03-26 Anton Vorontsovuec: add support for RGMII_RXID interface mode
2008-03-26 Anton Vorontsovuec: add support for gbit mii status readings
2008-03-26 Anton Vorontsov83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837X...
2008-03-26 Anton Vorontsov83xx: initialize serdes for MPC837XRDB boards
2008-03-26 Anton Vorontsov83xx: serdes setup routines
2008-03-26 Anton Vorontsov83xx: split COBJS onto separate lines
2008-03-26 Anton Vorontsov83xx: nand support for MPC837XRDB boards
2008-03-26 Jerry Van BarenEnable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
2008-03-26 Michael Barkowskimpc8323erdb: remove RTC and add EEPROM
2008-03-26 Michael Barkowskimpc8323erdb: Improve the system performance
2008-03-26 Michael Barkowskimpc8323erdb: use readable DDR config macros
2008-03-26 Timur Tabi83xx: Add Vitesse VSC7385 firmware uploading
2008-03-26 Timur TabiNET: Add Vitesse VSC7385 firmware uploading
2008-03-25 Wolfgang DenkCoding Style cleanyp; update CHANGELOG
2008-03-25 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-03-25 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-03-25 Jerry Van BarenRemove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF...
2008-03-25 Stefan Roesertc: Remove 2nd reference to max6900.o in drivers/rtc...
2008-03-25 Kyungmin ParkAdd Flex-OneNAND booting support
2008-03-25 André SchwarzMPC5200: support setup without FEC
2008-03-25 Jon LoeligerFSL: Move board/mpc8266ads under board/freescale
2008-03-25 Jon LoeligerFSL: Move board/mpc7448hpc2 under board/freescale
2008-03-25 Jon LoeligerFSL: Move board/mpc8260ads under board/freescale
2008-03-25 goda.yusukenet: Add support AX88796L ethernet device
2008-03-25 Wolfgang Denkne2000 driver: change #ifdef to Makefile conditional...
2008-03-25 goda.yusukenet: Divided code of NE2000 ethernet driver
2008-03-25 Mike Frysingernet/Blackfin: move on-chip MAC driver into drivers...
2008-03-25 Mike Frysingersmc91111: use SSYNC() rather than asm(ssync) for Blackfin
2008-03-25 Bryan O'Donoghue8xx: Update OF support on 8xx
2008-03-25 Kumar Galappc: Allow boards to specify how much memory they can map
2008-03-25 Bryan O'Donoghue8xx : Add OF support to Adder875 board port - resubmit
2008-03-25 Kumar GalaAdd setexpr command
2008-03-25 Jon LoeligerFSL: Move board/mpc7448hpc2 under board/freescale
2008-03-25 Jon LoeligerFSL: Move board/mpc8266ads under board/freescale
2008-03-25 Jon LoeligerFSL: Move board/mpc8260ads under board/freescale
2008-03-25 Shinya Kuribayashi[MIPS] Move gth2_config from ARM section to MIPS
2008-03-25 Shinya Kuribayashi[MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
2008-03-25 Shinya Kuribayashi[MIPS] Fix dcache_status()
2008-03-25 Shinya Kuribayashi[MIPS] Introduce _machine_restart
2008-03-25 Shinya Kuribayashi[MIPS] Cleanup CP0 Status initialization
2008-03-25 Shinya Kuribayashi[MIPS] Initialize CP0 Cause before setting up CP0 Statu...
2008-03-25 Shinya Kuribayashi[MIPS] INCA-IP: Move watchdog init code from start...
2008-03-25 Shinya Kuribayashi[MIPS] Implement flush_cache()
2008-03-25 Shinya Kuribayashi[MIPS] Fix I-/D-cache initialization loops
2008-03-25 Shinya Kuribayashi[MIPS] Replace memory clearance code with f_fill64
2008-03-25 Shinya Kuribayashi[MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END...
2008-03-25 Shinya Kuribayashi[MIPS] asm headers' updates
2008-03-25 Shinya Kuribayashi[MIPS] Request for the 'mips_cache_lock()' removal
2008-03-24 Yuri Tikhonovlwmon5 SYSMON POST: fix backlight control
2008-03-24 Yuri Tikhonovlwmon5 SYSMON POST: fix handling of negative temperatures
2008-03-24 Wolfgang DenkMerge branch 'master' of /home/wd/git/u-boot/master/
2008-03-23 Nobuhiro Iwamatsupci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
2008-03-22 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-03-22 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-03-22 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot-fdt
2008-03-22 Wolfgang DenkMerge branch 'master' of /home/wd/git/u-boot/work
2008-03-22 Yuri TikhonovLWMON5: fix dsPIC POST
2008-03-21 Gerald Van... Merge git://www.denx.de/git/u-boot into uboot
2008-03-20 Bartlomiej... [new uImage] Enable new uImage support for the pcs440ep...
2008-03-20 Bartlomiej... [new uImage] Do not compile new uImage format support...
2008-03-20 Bartlomiej... [new uImage] Disable debuging output in preparation...
2008-03-20 Bartlomiej... [new uImage] Compilation and new uImage handling fixes...
2008-03-20 Bartlomiej... [new uImage] Fix autoscr command used with new uImage...
2008-03-20 Bartlomiej... [new uImage] Fix *.its files location in documentation
2008-03-20 Wolfgang Denklwmon5 POST: remove unreachable code
2008-03-20 Yuri TikhonovLWMON5: POST RTC fix
2008-03-19 Martin KrauseTQM5200B: update MTD partition layout
2008-03-19 Stefan RoeseCFI: Small cleanup for FLASH_SHOW_PROGRESS
2008-03-19 Jerry Van BarenFlash programming progress countdown.
2008-03-19 Bartlomiej... [new uImage] Fix style issue spotted by Wolfgang Denk...
2008-03-19 David Gibsonlibfdt: Remove no longer used code from fdt_node_offset...
2008-03-19 David Gibsonlibfdt: Trivial cleanup for CHECK_HEADER)
2008-03-19 Kumar GalaFix fdt boardsetup command parsing
2008-03-19 Kumar GalaAdd sub-commands to fdt
2008-03-19 David Gibsonlibfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
2008-03-19 David Gibsonlibfdt: Add and use a node iteration helper function.
2008-03-19 David Gibsonlibfdt: Add fdt_set_name() function
2008-03-18 Yuri Tikhonovlwmon5: Fix register test logic to match the specific...
2008-03-18 Yuri TikhonovFix backlight in the lwmon5 POST.
next