]> git.karo-electronics.de Git - linux-beck.git/shortlog
linux-beck.git
2007-10-03 Paul Mundtsh: kgdb section mismatches and tidying.
2007-10-03 Thomas Gleixnersh: cleanup struct irqaction initializers.
2007-10-02 Paul Mundtsh: early_printk tidying.
2007-10-01 Adrian McMenaminvideo: pvr2fb: Add TV (RGB) support to Dreamcast PVR...
2007-09-28 Paul Mundtsh: Conditionalize gUSA support.
2007-09-28 Paul Mundtsh: Follow gUSA preempt changes in __switch_to().
2007-09-28 Paul Mundtsh: Tidy up gUSA preempt handling.
2007-09-28 Stuart Menefysh: __copy_user() optimizations for small copies.
2007-09-28 Stuart Menefysh: clkfwk: Support multi-level clock propagation.
2007-09-27 Paul Mundtsh: Fix URAM start address on SH7785.
2007-09-27 Paul Mundtsh: Use boot_cpu_data for CPU probe.
2007-09-27 Paul Mundtsh: Support extended mode TLB on SH-X3.
2007-09-27 Paul Mundtsh: Bump MAX_ACTIVE_REGIONS for SH7785.
2007-09-27 Paul Mundtsh: Fix plat_irq_setup_pins() for SH7785.
2007-09-27 Paul Mundtsh: Kill off duplicate NODES_SHIFT.
2007-09-27 Paul Mundtsh: processor.h needs smp.h
2007-09-27 Paul Mundtsh: Disable 4kB pages on extended mode TLB.
2007-09-27 Paul Mundtsh: Disable L2 reporting for present URAM only parts.
2007-09-24 Paul Mundtsh: Define _ebss for uClinux MTD map driver.
2007-09-24 Paul Mundtsh: Revert incorrect license string changes.
2007-09-24 Paul Mundtsh: Calculate cache aliases on L2 caches.
2007-09-24 Paul Mundtsh: nommu: Kill off dummy page fault ops for SH-3/4.
2007-09-24 Paul Mundtsh: Fix alias calculation for non-aliasing cases.
2007-09-21 Paul Mundtsh: Initial SH-X3 SMP support.
2007-09-21 Paul Mundtsh: Plug plat_smp_setup() in to generic setup path.
2007-09-21 Magnus Dammsh: Hook up the SH-X3 SMP intc register groups.
2007-09-21 Paul Mundtsh: Bring SMP support back from the dead.
2007-09-21 Magnus Dammsh: intc - initial SMP support.
2007-09-21 Paul Mundtsh: Add SMP tlbflush variants.
2007-09-21 Paul Mundtsh: Avoid smp_processor_id() in cache desc paths.
2007-09-21 Paul Mundtsh: Kill off special boot_cpu_data.
2007-09-21 Paul Mundtsh: Make cpufreq driver less noisy on SMP.
2007-09-21 Paul Mundtsh: Enable maple by default for the Dreamcast.
2007-09-21 Adrian McMenaminsh: Add maple bus support for the SEGA Dreamcast.
2007-09-21 Markus Brunnersh: Magic Panel MTD mapping update.
2007-09-21 Paul Mundtsh: rts7751r2d: Fix up trivial build failure.
2007-09-21 Aoi Shinkaish: rts7751r2d cf_ide rework
2007-09-21 Paul Mundtsh: Fix up extended mode TLB for SH-X2+ cores.
2007-09-21 Paul Mundtsh: Wire up URAM node on SH7785.
2007-09-21 Paul Mundtsh: se7206: update defconfig.
2007-09-21 Paul Mundtsh: se7206: Handle non-SuperIO I/O ports.
2007-09-21 Paul Mundtsh: r7780rp: irq-r7780rp needs linux/io.h.
2007-09-21 Paul Mundtsh: hp6xx: Trivial build fixes for INTC changes.
2007-09-21 Paul Mundtsh: se7206: heartbeat needs 32-bit writes.
2007-09-21 Paul Mundtsh: se7206: Make the I/O port routines less stupid.
2007-09-21 Markus Brunnersh: Magic Panel R2 board support.
2007-09-21 Kristoffer... sh: hp6xx: Enable pata_platform in defconfig.
2007-09-21 Kristoffer... sh: hp6xx: Enable touchscreen and powerbutton IRQs.
2007-09-21 Paul Mundtsh: Don't enable FPU for SH4AL-DSP.
2007-09-21 Paul Mundtsh: dma: Fix CONFIG_SYSFS=n build.
2007-09-21 Paul Mundtsh: INTC stubs for SH7343 and SH7770 builds.
2007-09-21 Paul Mundtserial: sh-sci: kgdb console build fixes.
2007-09-21 Kristoffer... sh: hp6xx: Update CF IRQ for INTC changes.
2007-09-21 Kristoffer... sh: dma: Fix up build for SH7709 support.
2007-09-21 Kristoffer... sh: hd64461: Trivial build fixes for SH7709.
2007-09-21 Kristoffer... backlight: Fix up hp680_bl build.
2007-09-21 Kristoffer... sh: hp6xx: APM build fix and new battery values.
2007-09-21 Kristoffer... sh: update hp6xx defconfig.
2007-09-21 Kristoffer... sh: Fix OFFCHIP_IRQ_BASE compile error.
2007-09-21 Paul Mundtsh: nommu fault handler needs signal.h.
2007-09-21 Paul Mundtsh: Fix up se7751 build.
2007-09-21 Magnus Dammsh: add writesb(), readsb(), writesw() and readsw(...
2007-09-21 Magnus Dammsh: remove sh7780 interrupt controller hack from pci...
2007-09-21 Magnus Dammsh: intc - rework higlander irq code for r7780mp and...
2007-09-21 Magnus Dammsh: minor fixes
2007-09-21 Magnus Dammsh: intc - irl mode update for sh7780 and sh7785
2007-09-21 Adrian McMenaminfb: pvr2fb: Shared IRQ for dreamcast pvr2.
2007-09-21 Magnus Dammsh: remove CONFIG_CPU_HAS_INTC_IRQ
2007-09-21 Paul Mundtsh: Fix up heartbeat build and resource size.
2007-09-21 Magnus Dammsh: defconfigs for R2D-PLUS and for R2D-1
2007-09-21 Paul Mundtsh: Overhaul spinlocks and rwlocks for SH-4A SMP.
2007-09-21 Paul Mundtsh: Kill off volatile silliness in sq_flush_range().
2007-09-21 Paul Mundtsh: More license string silliness.
2007-09-21 Paul Mundtsh: heartbeat driver update.
2007-09-21 Magnus Dammsh: intc - add support for sh7206
2007-09-21 Magnus Dammsh: intc - add support for sh7619
2007-09-21 Magnus Dammsh: fix irqs for the second serial port on sh7206
2007-09-21 Magnus Dammsh: intc - primary priority masking fixes
2007-09-21 Magnus Dammsh: intc - mark data structures as __initdata
2007-09-21 Magnus Dammsh: x3 - add ipi vectors
2007-09-21 Magnus Dammsh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MF...
2007-09-21 Magnus Dammsh: intc - convert board specific r2d code
2007-09-21 Magnus Dammsh: intc - rework core code
2007-09-21 Magnus Dammsh: intc - add a clear register to struct intc_prio_reg
2007-09-21 Magnus Dammsh: x3 - fix setup_bootmem_node() compile error with...
2007-09-21 Markus Brunnersh: Add SH7720 CPU support.
2007-09-21 Markus Brunnersh: Add gpio.h stubs for PFC definitions.
2007-09-21 Paul Mundtsh: Kill off duplicate symbol exports on SMP.
2007-09-21 Paul Mundtserial: sh-sci: Tidy cpufreq printk.
2007-09-21 Paul Mundtsh: Wire up CSM node for SH-X3.
2007-09-21 Paul Mundtserial: sh-sci: Shut up compiler warning for SH-X3...
2007-09-21 Paul Mundtsh: Bump up NODES_SHIFT for SH-X3.
2007-09-21 Paul Mundtsh: x3proto: Trivial ILSEL build fix.
2007-09-21 Paul Mundtsh: x3proto: Hook up ethernet and USB platform devices.
2007-09-21 Paul Mundtsh: x3proto: ILSEL IRQ support.
2007-09-21 Paul Mundtsh: Initial support for SH-X3 prototype board.
2007-09-21 Paul Mundtsh: Plug in SH-X3 SCIF0 for sercon earlyprintk.
2007-09-21 Paul Mundtsh: intc: Fix sense regs oops for IRL IRQs.
2007-09-21 Magnus Dammsh: remove intc2 code
2007-09-21 Magnus Dammsh: intc - convert voyagergx code
next