]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2015-08-05 Simon GlassReserve the top 16 flag bits for architecture-specific use
2015-08-05 Simon Glassx86: Use CR0 constants in CPU init
2015-08-05 Simon Glassx86: Add various minor tidy-ups to the 32-bit startup...
2015-08-05 Simon GlassBring in __aligned_u64 and friends to linux/types.h
2015-08-05 Simon GlassAllow objcopy to work without filling gaps with 0xff
2015-08-05 Simon Glasself: Add a few definitions for 64-bit relocation
2015-08-05 Simon Glassdm: serial: Correct logic in serial_find_console_or_panic()
2015-08-05 Simon Glassdm: core: Check for empty list in uclass_find_device()
2015-08-05 Simon GlassSupport removing default assembler flags
2015-08-05 Peng Fancommon: command add '\n' for debug msg
2015-08-05 Masahiro Yamadalib: fdt: fix indent of #ifdef..#endif conditional
2015-08-05 Bin Mengcommon: Print nothing in the __weak checkboard()
2015-08-05 Bin Menggitignore: Add defconfig and fdtgrep
2015-08-05 Bin Mengx86: bayleybay: Configure PCI IRQ
2015-08-05 Bin Mengx86: Add Intel Bayley Bay board support
2015-08-05 Bin Mengx86: Add microcode for BayTrail-I B0 stepping
2015-08-05 Bin Mengx86: baytrail: Update UPD setting for FSP Gold4 release
2015-08-05 Bin Mengx86: minnowmax: Remove smsc47x superio codes
2015-08-05 Bin Mengx86: Sanity test on vesa parameters before setting...
2015-08-05 Bin Mengx86: qemu: Add MP initialization
2015-08-05 Miao Yanx86: Add a 'pause' instruction in __udelay() for QEMU...
2015-08-05 Bin Mengdoc: dm: Update pci-info.txt for pci support
2015-08-05 Bin Mengdm: pci: Allow scan bridge child devices before relocation
2015-08-04 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-fsl...
2015-08-03 Vitaly Andrianovconfigs: ti_armv7_keystone2: replace addr_uboot with...
2015-08-03 Nikhil Badolaarmv8/ls2085ardb: Add USB support for ls2085ardb
2015-08-03 Nikhil Badolaarmv8/ls2085aqds: Add USB support for ls2085aqds
2015-08-03 Nikhil Badolaarmv8/lsch3/config: Define USB XHCI controller base...
2015-08-03 Nikhil Badolaarmv8/lsch3/config: Define CONFIG_SYS_CACHELINE_SIZE...
2015-08-03 York Sundrivers/ddr/fsl: Adjust bstopre value
2015-08-03 horia.geanta... drivers/crypto/fsl: clean-up - use fdt_setprop_u32...
2015-08-03 horia.geanta... drivers/crypto/fsl: fix snooping for write transactions
2015-08-03 horia.geanta... drivers/crypto/fsl: fix "era" property value on LE...
2015-08-03 Minghuan Liandrivers/pci/layerscape: Add EP mode support
2015-08-03 Minghuan Liandrivers/pci: Add function to find an extended capability
2015-08-03 Prabhakar Kushwahadrivers/fsl-mc: flib changes for mc 8.0.0
2015-08-03 Alex Porosanudrivers/crypto/fsl: enable raw data instead of von...
2015-08-03 Alex Porosanudrivers/crypto/fsl: change starting entropy delay value
2015-08-03 Alex Porosanudrivers/crypto/fsl: disable RNG oscillator maximum...
2015-08-03 Alison Wangarmv7/ls1021a/etsec: Enable Tx Data and TxBD snooping
2015-08-03 Alison Wangarmv7/ls1021a: allow OCRAM access permission as R/W...
2015-08-03 Wang Dongshengarmv7/ls102xa: Fix non-boot cpus cannot correctly fall...
2015-08-03 chenhui zhaoarmv7/ls1021atwr: program the regulator for deep sleep
2015-08-03 Tang Yuantianarmv7/ls1021atwr: added deep sleep support in uboot
2015-08-03 gaurav ranaarmv7/lS1021atwr: Enable bootscript for secure boot
2015-08-03 Zhao Qiangdriver/qe: use strncpy instead of strcpy
2015-08-03 Zhao Qiangdrivers/qe: transform parameter to compatible type
2015-08-03 Zhuoyu Zhangarmv7/ls1021a: Reserve secure code into RAM instead...
2015-08-03 Tom RiniPrepare v2015.10-rc1
2015-08-02 Tom Rinifsl_esdhc.c: Always make check_and_invalidate_dcache_ra...
2015-08-02 Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot-imx
2015-08-02 Stefano Babicarm: mx6: tqma6: fix build for WRU-IV baseboard
2015-08-02 Peng Fanimx: mx6ul_14x14_evk add basic board support
2015-08-02 Peng Fanimx: imx6_spl add mx6ul support
2015-08-02 Peng Fanimx:mx6ul add dram spl configuration and header file
2015-08-02 Peng Fanmx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL
2015-08-02 Peng Fanmxc: gpio add i.MX6UL support
2015-08-02 Peng Fanimx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL
2015-08-02 Peng Fanimx: mx6ul update soc related settings
2015-08-02 Peng Fanimx: mx6ul select SYS_L2CACHE_OFF
2015-08-02 Peng Fanimx:mx6ul add clock support
2015-08-02 Peng Fanimx: mx6ul remove errata for i.MX6UL
2015-08-02 Peng Fanimx-common: timer: add i.MX6UL support
2015-08-02 Peng Fanimx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL
2015-08-02 Peng Fanimx: mx6ul: Update imx registers head file
2015-08-02 Peng Fanimx: mx6ul: Add pins IOMUX head file
2015-08-02 Peng Fanimx: mx6ul: Add i.MX6UL CPU type
2015-08-02 Nikita Kiryanovsf: kconfig: add kconfig options for spi flashes
2015-08-02 Nikita Kiryanovusb: kconfig: create a menu for usb
2015-08-02 Nikita Kiryanovusb: kconfig: usb keyboard kconfig
2015-08-02 Nikita Kiryanovarm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig option
2015-08-02 Nikita Kiryanovarm: mx6: kconfig: don't select CPU_V7 per board
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: move CMD configs to defconfig
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: setup hdmi only on hdmi enable
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: add support for displaytype env var
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: make it possible to not init display
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: map HDMI to IPU1 DI0 explicitly
2015-08-02 Peng Fanimx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board...
2015-08-02 Peng Fanimx: mx6sabresd/sabreauto runtime setting fdt_file
2015-08-02 Peng Fanimx: mx6qp Enable PRG clock for IPU
2015-08-02 Ye.Liimx: mx6: hab : Remove the cache issue workaroud in...
2015-08-02 Peng Fanimx: mx6: ccm: Change the clock settings for i.MX6QP
2015-08-02 Peng Fanimx: add cpu type for i.MX6QP/DP
2015-08-01 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2015-08-01 Tom RiniMerge git://git.denx.de/u-boot-x86
2015-07-31 Priyanka Jainpowerpc/T104xRDB: Remove vbank check redundant code
2015-07-31 Shengzhou Liupowerpc/t1023rdb: eMMC boot without external SD card
2015-07-31 Shaohui Xiepowerpc/t4240: update serdes table
2015-07-31 Shengzhou Liupowerpc/t1023rdb: add support for T1023RDB RevC
2015-07-31 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT-Copy Boot Script on RAM
2015-07-31 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT- NAND secure boot target...
2015-07-31 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT- NAND secure boot target...
2015-07-31 Simon Glasspatman: Don't run patman when it is imported as a module
2015-07-30 Siva Durga... armv8: caches: Added routine to set non cacheable region
2015-07-29 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2015-07-28 Jaiprakash... powerpc/T102xRDB: Enable ifc nand ecc encode and decode
2015-07-28 Nikhil Badolapowerpc/mpc85xx: Correct CONFIG_USB_MAX_CONTROLLER_COUN...
2015-07-28 Raghav Dograpowerpc/b4860qds: Update README for DIP switch information
2015-07-28 Shengzhou Liupowerpc/t1024: update fman liodn for mac1
next