]> git.karo-electronics.de Git - mv-sheeva.git/shortlog
mv-sheeva.git
2012-02-29 Dan Williams[SCSI] libsas: delete device on sas address changed
2012-02-29 Dan Williams[SCSI] libsas: let libata recover links that fail to...
2012-02-29 Dan Williams[SCSI] libsas: fix sas port naming
2012-02-29 Dan Williams[SCSI] libsas: improve debug statements
2012-02-29 Maciej Trela[SCSI] libsas: kill spurious sas_put_device
2012-02-29 Dan Williams[SCSI] libsas: fix sas_unregister_ports vs sas_drain_work
2012-02-29 Dan Williams[SCSI] libsas: route local link resets through ata-eh
2012-02-29 Dan Williams[SCSI] libsas: fix mixed topology recovery
2012-02-29 Dan Williams[SCSI] libsas: close scsi_remove_target() vs libata...
2012-02-29 Dan Williams[SCSI] libsas: mark all domain devices gone if root...
2012-02-29 Dan Williams[SCSI] libsas: pre-clean commands that won the eh vs...
2012-02-29 Dan Williams[SCSI] isci: remove IDEV_EH hack to disable "discovery...
2012-02-29 Dan Williams[SCSI] isci: remove bus and reset handlers
2012-02-29 Dan Williams[SCSI] isci: ->lldd_ata_check_ready handler
2012-02-29 Dan Williams[SCSI] isci: stop interpreting ->lldd_lu_reset() as...
2012-02-29 Dan Williams[SCSI] isci: fix interpretation of "hard" reset
2012-02-29 Dan Williams[SCSI] isci: kill isci_port->status
2012-02-29 Dan Williams[SCSI] isci: kill iphy->isci_port lookups
2012-02-29 Dan Williams[SCSI] libsas: don't recover 'gone' devices in sas_ata_...
2012-02-29 Dan Williams[SCSI] libsas: fix sas_find_local_phy(), take phy refer...
2012-02-29 Dan Williams[SCSI] libsas: check for 'gone' expanders in smp_execut...
2012-02-29 Dan Williams[SCSI] libsas: don't mark expanders as gone when a...
2012-02-29 Dan Williams[SCSI] libsas: poll for ata device readiness after...
2012-02-19 Dan Williams[SCSI] libsas: async ata-eh
2012-02-19 Jeff Skirvin[SCSI] libsas: add mutex for SMP task execution
2012-02-19 Jeff Skirvin[SCSI] libsas: Remove redundant phy state notification...
2012-02-19 Dan Williams[SCSI] libsas: sas_phy_enable via transport_sas_phy_reset
2012-02-19 Dan Williams[SCSI] libsas: execute transport link resets with libat...
2012-02-19 Dan Williams[SCSI] libsas: perform sas-transport resets in shost...
2012-02-19 Dan Williams[SCSI] libsas: use libata-eh-reset for sata rediscovery...
2012-02-19 Dan Williams[SCSI] libsas: defer SAS_TASK_NEED_DEV_RESET commands...
2012-02-19 Dan Williams[SCSI] libsas: let libata handle command timeouts
2012-02-19 Dan Williams[SCSI] libsas: fix timeout vs completion race
2012-02-19 Dan Williams[SCSI] libsas: prevent double completion of scmds from eh
2012-02-19 Dan Williams[SCSI] libsas: close error handling vs sas_ata_task_don...
2012-02-19 Dan Williams[SCSI] libsas: kill invocation of scsi_eh_finish_cmd...
2012-02-19 Dan Williams[SCSI] libsas: use ->set_dmamode to notify lldds of...
2012-02-19 Dan Williams[SCSI] libsas: prevent domain rediscovery competing...
2012-02-19 Dan Williams[SCSI] libsas: convert dev->gone to flags
2012-02-19 Dan Williams[SCSI] libsas: remove ata_port.lock management duties...
2012-02-19 Dan Williams[SCSI] libsas: introduce sas_drain_work()
2012-02-19 Dan Williams[SCSI] libsas: convert ha->state to flags
2012-02-19 Dan Williams[SCSI] libsas: replace event locks with atomic bitops
2012-02-19 Dan Williams[SCSI] libsas: fix leak of dev->sata_dev.identify_...
2012-02-19 Dan Williams[SCSI] libsas: fix domain_device leak
2012-02-19 Dan Williams[SCSI] libsas: kill sas_slave_destroy
2012-02-19 Dan Williams[SCSI] libsas: remove unused ata_task_resp fields
2012-02-19 Martin K. Petersen[SCSI] Handle disk devices which can not process medium...
2012-02-19 Andrew Morton[SCSI] mpt2sas: spell "primitive" correctly in function...
2012-02-19 Paolo Bonzini[SCSI] virtio-scsi: SCSI driver for QEMU based virtual...
2012-02-19 Tomas Henzl[SCSI] hpsa: add some older controllers to the kdump...
2012-02-19 Mike Snitzer[SCSI] scsi_error: classify some ILLEGAL_REQUEST sense...
2012-02-19 Martin K. Petersen[SCSI] sd: Make sure provisioning mode is reported...
2012-02-19 Martin K. Petersen[SCSI] Ensure discard failure gets treated as a target...
2012-02-19 Tomas Henzl[SCSI] mpt2sas: add missing allocation check
2012-02-19 Vikas Chaudhary[SCSI] qla4xxx: Update driver version to 5.02.00-k14
2012-02-19 Vikas Chaudhary[SCSI] qla4xxx: Added ping support
2012-02-19 Vikas Chaudhary[SCSI] iscsi_transport: Added Ping support
2012-02-19 Vikas Chaudhary[SCSI] qla4xxx: added support for host event
2012-02-19 Vikas Chaudhary[SCSI] scsi_transport_iscsi: added support for host...
2012-02-19 Vikas Chaudhary[SCSI] qla4xxx: Proper detection of firmware abort...
2012-02-19 Lalit Chandivade[SCSI] qla4xxx: Remove un-necessary print statment
2012-02-19 Manish Rangankar[SCSI] qla4xxx: Modified debug log messages for boot...
2012-02-19 Lalit Chandivade[SCSI] qla4xxx: Fix verify boot idx correctly
2012-02-19 Lalit Chandivade[SCSI] qla4xxx: Fix un-necessary delay on invalid DDB
2012-02-19 Vikas Chaudhary[SCSI] qla4xxx: Remove unused code
2012-02-19 Bhanu Prakash... [SCSI] libfc: Handle discovery failure during ctlr...
2012-02-19 Bhanu Prakash... [SCSI] libfc: Fix panic in fc_exch_recv
2012-02-19 Robert Love[SCSI] fcoe: Remove reference counting on 'stuct fcoe_i...
2012-02-19 Robert Love[SCSI] fcoe: Do not switch context in vport_delete...
2012-02-19 Robert Love[SCSI] fcoe: Rename out_nomod label to out_putmod
2012-02-19 Neerav Parikh[SCSI] fcoe: Allow exposing FDMI attributes via sysfs
2012-02-19 Robert Love[SCSI] libfcoe: Don't KERN_ERR on netdev notification
2012-02-19 Dave Jiang[SCSI] isci: T10 DIF support
2012-02-19 Arun Easi[SCSI] qla2xxx: Avoid invalid request queue dereference...
2012-02-19 Arun Easi[SCSI] qla2xxx: Stop iteration after first failure...
2012-02-19 Arun Easi[SCSI] qla2xxx: Fix incorrect register access in qla2x0...
2012-02-19 Arun Easi[SCSI] qla2xxx: Handle device mapping changes due to...
2012-02-19 Chad Dupuis[SCSI] qla2xxx: Add ha->max_fibre_devices to keep track...
2012-02-19 Andrew Vasquez[SCSI] qla2xxx: Cache swl during fabric discovery.
2012-02-19 Joe Carnuccio[SCSI] qla2xxx: Remove EDC sysfs interface.
2012-02-19 Chad Dupuis[SCSI] qla2xxx: Update LICENSE.qla2xxx.
2012-02-19 Chad Dupuis[SCSI] qla2xxx: Perform firmware dump procedure on...
2012-02-19 Giridhar Malavali[SCSI] qla2xxx: Change the log message when previous...
2012-02-19 Arun Easi[SCSI] qla2xxx: Log messages to use correct vha.
2012-02-19 Arun Easi[SCSI] qla2xxx: Add new message when a new loopid is...
2012-02-19 Arun Easi[SCSI] qla2xxx: Fix ql_dbg arguments.
2012-02-19 Chad Dupuis[SCSI] qla2xxx: Use ql_log* #define's in ql_log() and...
2012-02-19 Chad Dupuis[SCSI] qla2xxx: Convert remaining printk's to ql_log...
2012-02-19 Chad Dupuis[SCSI] qla2xxx: Print mailbox command opcode and return...
2012-02-19 Andrew Vasquez[SCSI] qla2xxx: Reduce mbx-command timeout for Login...
2012-02-19 Andrew Vasquez[SCSI] qla2xxx: Prep zero-length BSG data-transfer...
2012-02-19 Andrew Vasquez[SCSI] qla2xxx: Perform implicit logout during rport...
2012-02-19 Chad Dupuis[SCSI] qla2xxx: Handle failure cases during fabric_login
2012-02-19 Chad Dupuis[SCSI] qla2xxx: Increase speed of flash access in ISP82...
2012-02-19 Joe Carnuccio[SCSI] qla2xxx: Return blank sysfs string on initial...
2012-02-19 Arun Easi[SCSI] qla2xxx: Handle change notifications based on...
2012-02-19 Joe Carnuccio[SCSI] qla2xxx: Correct print format for edc ql_log...
2012-02-19 Andrew Vasquez[SCSI] qla2xxx: Use consistent DL mask for ELS/CT passt...
2012-02-19 Giridhar Malavali[SCSI] qla2xxx: Consolidation of SRB processing.
next