]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2015-09-09 Prabhakar Kushwahaarmv8/ls2085ardb: Add eth & phy firmware loading support
2015-09-09 Masahiro Yamadalibfdt: fix error code of fdt_count_strings()
2015-09-09 Masahiro Yamadalibfdt: fix error code of fdt_get_string_index()
2015-09-09 Masahiro Yamadalibfdt: fix description of fdt_get_string()
2015-09-09 Sudeep Hollacmd_fdt: save fdtaddr in hex format
2015-09-09 Haikun Wangfdt: armv8: Fix build warnings on armv8
2015-09-09 Andre Przywarafdt: prevent clearing memory node if there are no banks
2015-09-09 Bin Mengpci: Disable expansion ROM address decoding when signat...
2015-09-09 Bin Mengpci: Configure expansion ROM during auto config process
2015-09-09 Bin Mengdrivers: block: Remove the ata_piix driver
2015-09-09 Bin Mengx86: Adjust config option order in defconfig for Crown...
2015-09-09 Bin Mengtools: ifdtool: Write correct offset on 32-bit machine
2015-09-09 Simon Glassx86: Add binary blob checksums for Minnowboard MAX
2015-09-09 Simon Glassdm: x86: baytrail: Correct PCI region 3 when driver...
2015-09-09 Simon Glassdm: x86: minnowmax: Move PCI to use driver model
2015-09-09 Simon Glassx86: pci: Tidy up the generic x86 PCI driver
2015-09-09 Simon Glassx86: Add ROM image description for minnowmax
2015-09-09 Simon Glassdm: spi: Enable environment for minnowmax
2015-09-09 Simon Glassdm: spi: Correct BIOS protection logic for ICH9
2015-09-09 Simon Glassdm: spi: Correct status register access width
2015-09-09 Bin Mengx86: Configure VESA parameters before loading Linux...
2015-09-09 Bin Mengx86: crownbay: Enable graphics support
2015-09-09 Bin Mengx86: Remove MARK_GRAPHICS_MEM_WRCOMB
2015-09-09 Bin Mengx86: Move VGA option rom macros to Kconfig
2015-09-09 Bin Mengx86: cmd_mtrr: Improve MTRR list information
2015-09-09 Bin Mengx86: queensbay: Change CPU_ADDR_BITS to 32
2015-09-09 Bin Mengx86: Setup fixed range MTRRs for legacy regions
2015-09-09 Jian Luovideo: Add 32-bit color depth support for VBE
2015-09-09 Jian Luox86: bios: Allow pci config read/write to host bridge...
2015-09-09 Jian Luox86: bios: Synchronize stack between real and protected...
2015-09-09 Bin Mengvideo: vesa_fb: Look up VGA device by class instead...
2015-09-09 Simon Glassdm: pci: Correct bus number when scanning sub-buses
2015-09-09 Simon Glassdm: pci: Use the correct hose when configuring devices
2015-09-09 Bin Mengx86: queensbay: Change PCIe root ports' interrupt routing
2015-09-09 Bin Mengx86: crownbay: Enable writing MP table
2015-09-09 Bin Mengx86: Update README.x86 for SMP support
2015-09-09 Bin Mengx86: Generate a valid MultiProcessor (MP) table
2015-09-09 Bin Mengx86: Add MultiProcessor (MP) table APIs
2015-09-09 Bin Mengx86: Remove inline for lapic access routines
2015-09-09 Bin Mengx86: Add I/O APIC register access routines
2015-09-09 Bin Mengx86: Clean up ioapic header file
2015-09-09 Bin Mengx86: Reduce PIRQ routing table size
2015-09-09 Bin Mengx86: Ignore function number when writing PIRQ routing...
2015-09-09 Bin Mengx86: Write correct bus number for the irq router
2015-09-09 Bin Mengx86: queensbay: Correct Topcliff device irqs
2015-09-09 Bin Mengx86: crownbay: Enable DM RTC support
2015-09-09 Bin Mengcmd: date: Change to use CONFIG_DM_RTC instead of CONFI...
2015-09-09 Bin Mengdm: rtc: Support mc146818 driver in driver model
2015-09-09 Bin Mengx86: crownbay: Add MP initialization
2015-09-09 Bin Mengx86: Clean up lapic codes
2015-09-09 Bin Mengx86: Move lapic_setup() call into init_bsp()
2015-09-09 Bin Mengx86: Move MP initialization codes into a common place
2015-09-09 Bin Mengx86: ivybridge: Remove SMP from CPU_SPECIFIC_OPTIONS
2015-09-09 Bin Mengdm: cpu: Add a new get_count method to cpu uclass
2015-09-09 Bin Mengx86: kconfig: Fix minor nits in MAX_CPUS
2015-09-09 Bin Mengx86: kconfig: Make MAX_CPUS and AP_STACK_SIZE depend...
2015-09-09 Bin Mengx86: dm: Clean up cpu drivers
2015-09-09 Bin Mengdm: cpu: Test against cpu_ops->get_info in cpu_get_info()
2015-09-09 Bin Mengdm: cpu: Fix undefined ENOSYS build error
2015-09-09 Simon Glassdm: spi: Correct minor nits in ICH driver
2015-09-09 Simon Glassspi: sf: Print the error code on failure
2015-09-09 Bin Mengx86: fsp: Move FspInitEntry call to board_init_f()
2015-09-09 Bin Mengx86: fsp: Load GDT before calling FspInitEntry
2015-09-09 Bin Mengx86: Add Kconfig options to be used by arch/x86/cpu...
2015-09-09 Tom Rinibuilderthread.py: Keep 'SPL'
2015-09-09 Simon GlassRFC: Deprecate MAKEALL
2015-09-09 Tom RiniPrepare v2015.07
2015-09-09 Andre Przywarascsi: fix compiler warning with DEBUG and 48bit LBAs
2015-09-09 Masahiro Yamadamtd: fix false positive "Offset exceeds device limit...
2015-09-09 Stefan Roesearm: mvebu: db-88f6820-gp: Add USB/EHCI support
2015-09-09 Stefan Roeseusb: Add EHCI support for Armada 38x (mvebu)
2015-09-09 Stefan Roesearm: mvebu: db-88f6820-gp.h: Add SATA/SCSI (AHCI) support
2015-09-09 Stefan Roesearm: mvebu: Add SATA/SCSI (AHCI) support for Armada...
2015-09-09 Stefan Roeseblock: ahci: Don't enable port interrupts
2015-09-09 Stefan Roesearm: mvebu: db-88f6820-gp: Add MMC/SDIO support
2015-09-09 Stefan Roesearm: mvebu: Add SDIO/SDHCI support for Armada A38x
2015-09-09 Stefan Roesemmc: sdhci.c: Add config option to use a fixed buffer...
2015-09-09 Stefan Roesemmc: sdhci: Use timer based timeout detection in sdhci_...
2015-09-09 Stefan Roesearm: mvebu: db-88f6820-gp: Add MAINTAINERS file
2015-09-09 Simon Glassexynos: i2c: Correct bug in pinmux selection
2015-09-09 Minkyu Kangarm: adds the status info for odroid-xu3
2015-09-09 Tim Harveythermal: imx_thermal: fix busywait if IMX6 temp <0C
2015-09-09 Albert ARIBAUD... tools: mkimage: fix imximage header size
2015-09-09 Albert ARIBAUD... i2c: fix vf610 support
2015-09-09 Albert ARIBAUD... net: fec_mxc: remove useless struct nbuf
2015-09-08 Ulises CardenasiMX: adding parsing to hab_status command
2015-09-08 Peng Fanimx: mx6 add i2c4 clock support for i.MX6SX
2015-09-08 Peng Fanimx: mx6 remove duplicated enable_cspi_clock
2015-09-08 Peter Robinsonimx6: standardise OCOTP and fuse config to mx6_common
2015-09-08 Tim Harveythermal:imx_thermal: enter busywait cooling loop when...
2015-09-08 Tang Yuantianahci: Fix compiling warnings under 64bit platforms
2015-09-08 Yegor Yefremovarm: baltos: change USB ports functions
2015-09-08 Michael Scherbankeystone2: config: update default mtd
2015-09-08 Antonio Borneostm32f4: fix gpio description in comment
2015-09-08 Antonio Borneostm32f4: fix minor typo in comment
2015-09-08 Antonio Borneostm32f4: fix MAINTAINERS file
2015-09-08 Egli, Samuelsiemens,am33x: adjust mtd partition
2015-09-08 Yegor Yefremovarm: baltos: fix NAND boot
2015-09-08 Yegor Yefremovarm: baltos: drop I2C speed to 1000 Hz
2015-09-08 Yegor Yefremovarm: baltos: enable CMD_NET and FIT support in defconfig
next