]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2012-09-01 Benoît Thébaudeaumx35: Fix broken pin definitions
2012-09-01 Benoît Thébaudeaumx35 iomux: Remove unused macro
2012-09-01 Benoît Thébaudeaumx5: Undeclare imx_decode_pll()
2012-09-01 Stefano BabicMX: Set a common gpio.h for all i.MX
2012-09-01 Fabio Estevammxs: Use correct function name to initialize dram
2012-09-01 Fabio Estevammx28evk: Remove unneeded 'undef'
2012-09-01 Otavio SalvadorMX28: Move "regs-base.h" include after SoC type configu...
2012-09-01 Otavio SalvadorMX28: config: Allow different target generation in...
2012-09-01 Benoît Thébaudeaumx35: Add cpu_mmc_init()
2012-09-01 Benoît Thébaudeaumx5/6: Fix cpu_mmc_init() return value
2012-09-01 Matt Sealeyspi: fix mxs_spi_slave structure allocation to clear...
2012-09-01 Matt Sealeyspi: fix mxc_spi_slave structure allocation to clear...
2012-09-01 Troy Kiskymx53evk: add boot_mode support
2012-09-01 Troy Kiskymx6qsabrelite: add boot_mode support
2012-09-01 Troy Kiskyimx-common/cmd_bmode.c: add imx bmode (bootmode) command
2012-09-01 Troy Kiskyiomux: move IOMUX_GPR13_xxx defines
2012-09-01 Benoît Thébaudeaumx35: Remove duplicate GPIO3_BASE_ADDR
2012-09-01 Benoît Thébaudeaumx5: cosmetic: Clean up lowlevel_init
2012-09-01 Benoît Thébaudeaumx5/6 timer: Round up tick_to_time() value
2012-09-01 Benoît Thébaudeaumx3: Fix typo on IPU_CONF_CSI_EN
2012-09-01 Benoît Thébaudeaumx35: Fix typo on EDIO
2012-09-01 Benoît Thébaudeaumx5: Enable dcache
2012-09-01 Benoît Thébaudeaumx25: Enable dcache
2012-09-01 Benoît Thébaudeaumxc_spi: Round up clock divider
2012-09-01 tremrtc: add support of mx27 rtc
2012-09-01 Marek VasutMX28: Shuffle around the power management code
2012-09-01 Marek VasutMX28: Drop the cp15 reconfiguration from SPL
2012-09-01 Vikram Narayanantx25: Use generic gpio_* calls
2012-09-01 Otavio Salvadormxs: Convert sys_proto.h prefixes to 'mxs'
2012-09-01 Otavio Salvadormxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
2012-09-01 Otavio Salvadormxs: Remove not required include of iomux-mx28.h
2012-09-01 Otavio Salvadormxs: Remove not required explicit iomux-mx28.h include
2012-09-01 Fabio Estevamapx4devkit: Turn on caches
2012-09-01 Fabio Estevamm28evk: Turn on caches
2012-09-01 Łukasz Majewskiarm:cache:trats: Enable PL310 L2 Cache Controller at...
2012-09-01 Łukasz Majewskiarm:exynos: Enable data cache at exynos based processors.
2012-09-01 Donghwa Leevideo: support exynos pwm backlight driver
2012-09-01 Donghwa Leevideo: exynos fb driver supports display port feature
2012-09-01 Donghwa Leevideo: add dp_enabled variable in vidinfo structure
2012-09-01 Donghwa Leevideo: support exynos display port drivers
2012-09-01 Donghwa LeeEXYNOS5: add display port base address
2012-09-01 Donghwa LeeEXYNOS5: support display port phy control function
2012-09-01 Donghwa LeeEXYNOS5: support display system register control
2012-09-01 Donghwa LeeEXYNOS5: support exynos5 lcd clock control
2012-09-01 Donghwa Leevideo: support exynos fimd driver for various exynos...
2012-09-01 Jaehoon ChungARM: EXYNOS: fixed compiler warning message
2012-09-01 Zhong Hongboarm/s5pxx: Fix get_timer_masked to get the time.
2012-09-01 Łukasz Majewskiarm:trats: loaduimage environment variable defied for...
2012-09-01 Rajeshwari... SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
2012-09-01 Rajeshwari... EXYNOS5 : Modify pinnumx settings as per Exynos5250...
2012-09-01 Rajeshwari... EXYNOS5: CLOCK: Add BPLL support
2012-09-01 Rajeshwari... EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250...
2012-09-01 Rajeshwari... Exynos5: DDR3: Add DDR3 memory setup for Exynos5250...
2012-09-01 Rajeshwari... EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
2012-09-01 Rajeshwari... EXYNOS5: CLOCK: define additional clock registers for...
2012-09-01 Rajeshwari... SMDK5250: Add smdk5250-uboot-spl.lds
2012-09-01 Rajeshwari... SMDK5250: SPL: Define parametric board initializer
2012-09-01 Rajeshwari... ARCH: SPL: Add parametric board initializer
2012-09-01 Rob HerringARM: Remove unused stack and irq config defines
2012-09-01 Tetsuyuki Kobayashiarm: bugfix: save_boot_params_default accesses uninital...
2012-09-01 Allen Martintegra20: Remove armv4t build flags
2012-09-01 Allen Martinspl: fix SPL build of private libgcc
2012-09-01 Allen Martinarm: enable libgcc build for SPL
2012-09-01 Allen Martintegra20: enable SPL for tegra20 boards
2012-09-01 Allen Martintegra20: move SDRAM param save to later in boot
2012-09-01 Allen Martintegra20: add u-boot-*-tegra.bin targets
2012-09-01 Allen MartinARM: add tegra20 support to arm720t
2012-09-01 Allen Martintegra20: remove timer_init from SPL build
2012-09-01 Allen MartinARM: Fix arm720t SPL build
2012-09-01 Allen MartinMAKEALL: update to work with new boards.cfg syntax
2012-09-01 Allen Martinmkconfig: remove bashisms and cleanup config.mk generation
2012-09-01 Allen Martintegra20: make board mkdir commands unconditional
2012-09-01 Allen Martintegra20: tec: add tegra20-common-post.h
2012-09-01 Allen Martintegra20: rename CONFIG_MACH_TEGRA_GENERIC
2012-09-01 Allen Martintegra20: move tegra20 SoC code to arch/arm/cpu/tegra20...
2012-09-01 Allen Martintegra20: rename tegra2 -> tegra20
2012-09-01 Stephen WarrenARM: add Raspberry Pi model B board, using BCM2835 SoC
2012-09-01 Stephen WarrenARM: add basic support for the Broadcom BCM2835 SoC
2012-09-01 Stephen WarrenARM: arm1176: enable instruction cache in arch_cpu_init()
2012-09-01 Stephen WarrenREADME: fix references to config_cmd_default.h
2012-09-01 Mathieu J.... snowball: Adding board specific cache cleanup routine
2012-09-01 Mathieu J.... armv7: Adding cpu specific cache managmenent
2012-09-01 John Rigbyu8500: Separating mmc config parameters from driver
2012-09-01 Mathieu J.... u8500: Enabling power to MMC device on AB8500 V2
2012-09-01 Mathieu J.... u8500: Moving processor-specific functions to cpu area.
2012-09-01 Mathieu J.... snowball: applying power to LAN and GBF controllers
2012-09-01 Mathieu J.... snowball: Moving to ux500.v2 addess scheme for PRCMU...
2012-09-01 Mathieu J.... snowball: Adding CPU clock initialisation
2012-09-01 Mathieu J.... snowball: Adding architecture dependent initialisation
2012-09-01 Mathieu J.... u8500: Moving prcmu to cpu directory
2012-09-01 Mathieu J.... snowball: Add support for ux500 based snowball board
2012-09-01 Tom Rinidavinci, c6x: Always use C version of reset code
2012-09-01 Jeroen Hofsteearm: omap: Fix switching back to nandecc sw.
2012-09-01 Heiko Schocherdavinci: enbw_cmc: change switch init behaviour
2012-09-01 Satyanarayana... am33xx evm: Update secure_emif_sdram_config during...
2012-09-01 Sughosh Ganuda8xx/hawkboard: Add support for ohci host controller
2012-09-01 Tom Riniarmv7: Make lowlevel_init.S's lowlevel_init do ABI...
2012-09-01 Tom Riniomap4/5/am33xx: Make lowlevel_init available to all...
2012-09-01 Tom Riniam335x evm: Enable support for spi0
2012-09-01 Tom Riniam33xx: Add support, update omap3 McSPI driver
next