ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

[karo-tx-linux.git] / arch / arm / boot / dts / imx28-cfa10056.dts

diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index f65199878122469c2a7d8ac2cd85b63d77dd0c73..cef959a97219b8e14bca15b01c96d6e93cf1730a 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -30,9 +30,9 @@
                                                MX28_PAD_SSP2_MISO__GPIO_2_18
                                                MX28_PAD_AUART1_TX__GPIO_3_5
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                lcdif_pins_cfa10056: lcdif-10056@0 {
@@ -43,9 +43,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
@@ -53,9 +53,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_LCD_RESET__GPIO_3_30
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
                        };