ARM: dts: imx6qdl: rename pinctrl_pwm0 for consistency

[karo-tx-linux.git] / arch / arm / boot / dts / imx6qdl-sabresd.dtsi

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6e5dfdb32416847184875a6652aeea70281a9850..88d4a56fab2183981509c454163bb9eb15c0c224 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -27,6 +27,15 @@
                        enable-active-high;
                };
 
+               reg_usb_h1_vbus: usb_h1_vbus {
+                       compatible = "regulator-fixed";
+                       regulator-name = "usb_h1_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio1 29 0>;
+                       enable-active-high;
+               };
+
                reg_audio: wm8962_supply {
                        compatible = "regulator-fixed";
                        regulator-name = "wm8962-supply";
@@ -41,12 +50,14 @@
                volume-up {
                        label = "Volume Up";
                        gpios = <&gpio1 4 0>;
+                       gpio-key,wakeup;
                        linux,code = <115>; /* KEY_VOLUMEUP */
                };
 
                volume-down {
                        label = "Volume Down";
                        gpios = <&gpio1 5 0>;
+                       gpio-key,wakeup;
                        linux,code = <114>; /* KEY_VOLUMEDOWN */
                };
        };
@@ -69,6 +80,14 @@
                mux-int-port = <2>;
                mux-ext-port = <3>;
        };
+
+       backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm1 0 5000000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <7>;
+               status = "okay";
+       };
 };
 
 &audmux {
@@ -77,10 +96,27 @@
        status = "okay";
 };
 
+&ecspi1 {
+       fsl,spi-num-chipselects = <1>;
+       cs-gpios = <&gpio4 9 0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ecspi1_2>;
+       status = "okay";
+
+       flash: m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "st,m25p32";
+               spi-max-frequency = <20000000>;
+               reg = <0>;
+       };
+};
+
 &fec {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet_1>;
        phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio1 25 0>;
        status = "okay";
 };
 
@@ -93,7 +129,7 @@
        codec: wm8962@1a {
                compatible = "wlf,wm8962";
                reg = <0x1a>;
-               clocks = <&clks 169>;
+               clocks = <&clks 201>;
                DCVDD-supply = <&reg_audio>;
                DBVDD-supply = <&reg_audio>;
                AVDD-supply = <&reg_audio>;
@@ -113,6 +149,75 @@
        };
 };
 
+&i2c3 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c3_2>;
+       status = "okay";
+
+       egalax_ts@04 {
+               compatible = "eeti,egalax_ts";
+               reg = <0x04>;
+               interrupt-parent = <&gpio6>;
+               interrupts = <7 2>;
+               wakeup-gpios = <&gpio6 7 0>;
+       };
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       hog {
+               pinctrl_hog: hoggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_4__GPIO1_IO04   0x80000000
+                               MX6QDL_PAD_GPIO_5__GPIO1_IO05   0x80000000
+                               MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
+                               MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
+                               MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
+                               MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+                               MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+                               MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+                       >;
+               };
+       };
+};
+
+&ldb {
+       status = "okay";
+
+       lvds-channel@1 {
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               display-timings {
+                       native-mode = <&timing0>;
+                       timing0: hsd100pxn1 {
+                               clock-frequency = <65000000>;
+                               hactive = <1024>;
+                               vactive = <768>;
+                               hback-porch = <220>;
+                               hfront-porch = <40>;
+                               vback-porch = <21>;
+                               vfront-porch = <7>;
+                               hsync-len = <60>;
+                               vsync-len = <10>;
+                       };
+               };
+       };
+};
+
+&pwm1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm1_1>;
+       status = "okay";
+};
+
 &ssi2 {
        fsl,mode = "i2s-slave";
        status = "okay";
@@ -125,6 +230,7 @@
 };
 
 &usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
        status = "okay";
 };
 
@@ -139,6 +245,7 @@
 &usdhc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc2_1>;
+       bus-width = <8>;
        cd-gpios = <&gpio2 2 0>;
        wp-gpios = <&gpio2 3 0>;
        status = "okay";
@@ -147,6 +254,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3_1>;
+       bus-width = <8>;
        cd-gpios = <&gpio2 0 0>;
        wp-gpios = <&gpio2 1 0>;
        status = "okay";