#include <linux/types.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
-#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include "common.h"
#include "hardware.h"
-#define CCR 0x0
-#define BM_CCR_WB_COUNT (0x7 << 16)
-#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21)
-#define BM_CCR_RBC_EN (0x1 << 27)
-
-#define CCGR0 0x68
-#define CCGR1 0x6c
-#define CCGR2 0x70
-#define CCGR3 0x74
-#define CCGR4 0x78
-#define CCGR5 0x7c
-#define CCGR6 0x80
-#define CCGR7 0x84
-
-#define CLPCR 0x54
-#define BP_CLPCR_LPM 0
-#define BM_CLPCR_LPM (0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
-#define BM_CLPCR_SBYOS (0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
-#define BM_CLPCR_VSTBY (0x1 << 8)
-#define BP_CLPCR_STBY_COUNT 9
-#define BM_CLPCR_STBY_COUNT (0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
-
-#define CGPR 0x64
-#define BM_CGPR_CHICKEN_BIT (0x1 << 17)
-
-static void __iomem *ccm_base;
-
-void imx6q_set_chicken_bit(void)
-{
- u32 val = readl_relaxed(ccm_base + CGPR);
-
- val |= BM_CGPR_CHICKEN_BIT;
- writel_relaxed(val, ccm_base + CGPR);
-}
-
-static void imx6q_enable_rbc(bool enable)
-{
- u32 val;
- static bool last_rbc_mode;
-
- if (last_rbc_mode == enable)
- return;
- /*
- * need to mask all interrupts in GPC before
- * operating RBC configurations
- */
- imx_gpc_mask_all();
-
- /* configure RBC enable bit */
- val = readl_relaxed(ccm_base + CCR);
- val &= ~BM_CCR_RBC_EN;
- val |= enable ? BM_CCR_RBC_EN : 0;
- writel_relaxed(val, ccm_base + CCR);
-
- /* configure RBC count */
- val = readl_relaxed(ccm_base + CCR);
- val &= ~BM_CCR_RBC_BYPASS_COUNT;
- val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
- writel(val, ccm_base + CCR);
-
- /*
- * need to delay at least 2 cycles of CKIL(32K)
- * due to hardware design requirement, which is
- * ~61us, here we use 65us for safe
- */
- udelay(65);
-
- /* restore GPC interrupt mask settings */
- imx_gpc_restore_all();
-
- last_rbc_mode = enable;
-}
-
-static void imx6q_enable_wb(bool enable)
-{
- u32 val;
- static bool last_wb_mode;
-
- if (last_wb_mode == enable)
- return;
-
- /* configure well bias enable bit */
- val = readl_relaxed(ccm_base + CLPCR);
- val &= ~BM_CLPCR_WB_PER_AT_LPM;
- val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
- writel_relaxed(val, ccm_base + CLPCR);
-
- /* configure well bias count */
- val = readl_relaxed(ccm_base + CCR);
- val &= ~BM_CCR_WB_COUNT;
- val |= enable ? BM_CCR_WB_COUNT : 0;
- writel_relaxed(val, ccm_base + CCR);
-
- last_wb_mode = enable;
-}
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
- u32 val = readl_relaxed(ccm_base + CLPCR);
-
- val &= ~BM_CLPCR_LPM;
- switch (mode) {
- case WAIT_CLOCKED:
- imx6q_enable_wb(false);
- imx6q_enable_rbc(false);
- break;
- case WAIT_UNCLOCKED:
- val |= 0x1 << BP_CLPCR_LPM;
- val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
- break;
- case STOP_POWER_ON:
- val |= 0x2 << BP_CLPCR_LPM;
- break;
- case WAIT_UNCLOCKED_POWER_OFF:
- val |= 0x1 << BP_CLPCR_LPM;
- val &= ~BM_CLPCR_VSTBY;
- val &= ~BM_CLPCR_SBYOS;
- break;
- case STOP_POWER_OFF:
- val |= 0x2 << BP_CLPCR_LPM;
- val |= 0x3 << BP_CLPCR_STBY_COUNT;
- val |= BM_CLPCR_VSTBY;
- val |= BM_CLPCR_SBYOS;
- imx6q_enable_wb(true);
- imx6q_enable_rbc(true);
- break;
- default:
- return -EINVAL;
- }
-
- writel_relaxed(val, ccm_base + CLPCR);
-
- return 0;
-}
-
static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
-static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
static const char *pcie_axi_sels[] = { "axi", "ahb", };
-static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
- "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+ "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
static const char *cko2_sels[] = {
"mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
"gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
"uart_serial", "spdif", "asrc", "hsi_tx",
};
static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
+ "pcie_ref", "sata_ref",
+};
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max
+ spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
};
static struct clk *clk[clk_max];
{ .val = 1, .div = 10, },
{ .val = 2, .div = 5, },
{ .val = 3, .div = 4, },
+ { /* sentinel */ }
};
static struct clk_div_table post_div_table[] = {
{ .val = 2, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 0, .div = 4, },
- { }
+ { /* sentinel */ }
};
static struct clk_div_table video_div_table[] = {
{ .val = 1, .div = 2, },
{ .val = 2, .div = 1, },
{ .val = 3, .div = 4, },
- { }
+ { /* sentinel */ }
};
static void __init imx6q_clocks_init(struct device_node *ccm_node)
WARN_ON(!base);
/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
- if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+ if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
post_div_table[1].div = 1;
post_div_table[2].div = 1;
video_div_table[1].div = 1;
base + 0xe0, 0, 2, 0, clk_enet_ref_table,
&imx_ccm_lock);
+ clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+ /*
+ * lvds1_gate and lvds2_gate are pseudo-gates. Both can be
+ * independently configured as clock inputs or outputs. We treat
+ * the "output_enable" bit as a gate, even though it's really just
+ * enabling clock output.
+ */
+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
np = ccm_node;
base = of_iomap(np, 0);
WARN_ON(!base);
- ccm_base = base;
+
+ imx6q_pm_set_ccm_base(base);
/* name reg shift width parent_names num_parents */
clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
- if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) {
+ if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
+ cpu_is_imx6dl()) {
clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
}
if (ret)
pr_warn("failed to set up CLKO: %d\n", ret);
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
+ /* All existing boards with PCIe use LVDS1 */
+ if (IS_ENABLED(CONFIG_PCI_IMX6))
+ clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
projects / karo-tx-linux.git / blobdiff