mtd: gpmi: disable BB marker swapping

[karo-tx-linux.git] / drivers / mtd / nand / gpmi-nand / gpmi-nand.c

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 59ab0692f0b97f58fef750b6f5e29c11b6fa0367..b9ce6c56365fa1a763df5c5d10c13a071a9dce0b 100644 (file)
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -45,7 +45,10 @@ static struct nand_bbt_descr gpmi_bbt_descr = {
        .pattern        = scan_ff_pattern
 };
 
-/*  We will use all the (page + OOB). */
+/*
+ * We may change the layout if we can get the ECC info from the datasheet,
+ * else we will use all the (page + OOB).
+ */
 static struct nand_ecclayout gpmi_hw_ecclayout = {
        .eccbytes = 0,
        .eccpos = { 0, },
@@ -354,9 +357,8 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this)
 
 struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
 {
-       int chipnr = this->current_chip;
-
-       return this->dma_chans[chipnr];
+       /* We use the DMA channel 0 to access all the nand chips. */
+       return this->dma_chans[0];
 }
 
 /* Can we use the upper's buffer directly for DMA? */
@@ -1263,14 +1265,22 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 static int
 gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
 {
-       /*
-        * The BCH will use all the (page + oob).
-        * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
-        * But it can not stop some ioctls such MEMWRITEOOB which uses
-        * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
-        * these ioctls too.
-        */
-       return -EPERM;
+       struct nand_oobfree *of = mtd->ecclayout->oobfree;
+       int status = 0;
+
+       /* Do we have available oob area? */
+       if (!of->length)
+               return -EPERM;
+
+       if (!nand_is_slc(chip))
+               return -EPERM;
+
+       chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
+       chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+       chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+       status = chip->waitfunc(mtd, chip);
+       return status & NAND_STATUS_FAIL ? -EIO : 0;
 }
 
 static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
@@ -1571,11 +1581,12 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data  *this)
        int ret;
 
        /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+#if 0
        if (GPMI_IS_MX23(this))
                this->swap_block_mark = false;
        else
                this->swap_block_mark = true;
-
+#endif
        /* Set up the medium geometry */
        ret = gpmi_set_geometry(this);
        if (ret)
@@ -1664,7 +1675,7 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this)
        if (ret)
                goto err_out;
 
-       ret = nand_scan_ident(mtd, 1, NULL);
+       ret = nand_scan_ident(mtd, 2, NULL);
        if (ret)
                goto err_out;
 
@@ -1691,19 +1702,19 @@ static const struct platform_device_id gpmi_ids[] = {
        { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, },
        { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, },
        { .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, },
-       {},
+       {}
 };
 
 static const struct of_device_id gpmi_nand_id_table[] = {
        {
                .compatible = "fsl,imx23-gpmi-nand",
-               .data = (void *)&gpmi_ids[IS_MX23]
+               .data = (void *)&gpmi_ids[IS_MX23],
        }, {
                .compatible = "fsl,imx28-gpmi-nand",
-               .data = (void *)&gpmi_ids[IS_MX28]
+               .data = (void *)&gpmi_ids[IS_MX28],
        }, {
                .compatible = "fsl,imx6q-gpmi-nand",
-               .data = (void *)&gpmi_ids[IS_MX6Q]
+               .data = (void *)&gpmi_ids[IS_MX6Q],
        }, {}
 };
 MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);