phba->sli4_hba.scsi_xri_max);
spin_lock_irq(&phba->scsi_buf_list_get_lock);
- spin_lock_irq(&phba->scsi_buf_list_put_lock);
+ spin_lock(&phba->scsi_buf_list_put_lock);
list_splice_init(&phba->lpfc_scsi_buf_list_get, &scsi_sgl_list);
list_splice(&phba->lpfc_scsi_buf_list_put, &scsi_sgl_list);
- spin_unlock_irq(&phba->scsi_buf_list_put_lock);
+ spin_unlock(&phba->scsi_buf_list_put_lock);
spin_unlock_irq(&phba->scsi_buf_list_get_lock);
if (phba->sli4_hba.scsi_xri_cnt > phba->sli4_hba.scsi_xri_max) {
psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
}
spin_lock_irq(&phba->scsi_buf_list_get_lock);
- spin_lock_irq(&phba->scsi_buf_list_put_lock);
+ spin_lock(&phba->scsi_buf_list_put_lock);
list_splice_init(&scsi_sgl_list, &phba->lpfc_scsi_buf_list_get);
INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
- spin_unlock_irq(&phba->scsi_buf_list_put_lock);
+ spin_unlock(&phba->scsi_buf_list_put_lock);
spin_unlock_irq(&phba->scsi_buf_list_get_lock);
return 0;
struct lpfc_mqe *mqe;
int longs;
+ /* Get all the module params for configuring this host */
+ lpfc_get_cfgparam(phba);
+
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
if (rc)
sizeof(struct lpfc_mbox_ext_buf_ctx));
INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list);
- /*
- * We need to do a READ_CONFIG mailbox command here before
- * calling lpfc_get_cfgparam. For VFs this will report the
- * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
- * All of the resources allocated
- * for this Port are tied to these values.
- */
- /* Get all the module params for configuring this host */
- lpfc_get_cfgparam(phba);
phba->max_vpi = LPFC_MAX_VPI;
/* This will be set to correct value after the read_config mbox */
phba->sli4_hba.fcp_wq = NULL;
}
- if (phba->pci_bar0_memmap_p) {
- iounmap(phba->pci_bar0_memmap_p);
- phba->pci_bar0_memmap_p = NULL;
- }
- if (phba->pci_bar2_memmap_p) {
- iounmap(phba->pci_bar2_memmap_p);
- phba->pci_bar2_memmap_p = NULL;
- }
- if (phba->pci_bar4_memmap_p) {
- iounmap(phba->pci_bar4_memmap_p);
- phba->pci_bar4_memmap_p = NULL;
- }
-
/* Release FCP CQ mapping array */
if (phba->sli4_hba.fcp_cq_map != NULL) {
kfree(phba->sli4_hba.fcp_cq_map);
* particular PCI BARs regions is dependent on the type of
* SLI4 device.
*/
- if (pci_resource_start(pdev, 0)) {
- phba->pci_bar0_map = pci_resource_start(pdev, 0);
- bar0map_len = pci_resource_len(pdev, 0);
+ if (pci_resource_start(pdev, PCI_64BIT_BAR0)) {
+ phba->pci_bar0_map = pci_resource_start(pdev, PCI_64BIT_BAR0);
+ bar0map_len = pci_resource_len(pdev, PCI_64BIT_BAR0);
/*
* Map SLI4 PCI Config Space Register base to a kernel virtual
"registers.\n");
goto out;
}
+ phba->pci_bar0_memmap_p = phba->sli4_hba.conf_regs_memmap_p;
/* Set up BAR0 PCI config space register memory map */
lpfc_sli4_bar0_register_memmap(phba, if_type);
} else {
}
if ((if_type == LPFC_SLI_INTF_IF_TYPE_0) &&
- (pci_resource_start(pdev, 2))) {
+ (pci_resource_start(pdev, PCI_64BIT_BAR2))) {
/*
* Map SLI4 if type 0 HBA Control Register base to a kernel
* virtual address and setup the registers.
*/
- phba->pci_bar1_map = pci_resource_start(pdev, 2);
- bar1map_len = pci_resource_len(pdev, 2);
+ phba->pci_bar1_map = pci_resource_start(pdev, PCI_64BIT_BAR2);
+ bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2);
phba->sli4_hba.ctrl_regs_memmap_p =
ioremap(phba->pci_bar1_map, bar1map_len);
if (!phba->sli4_hba.ctrl_regs_memmap_p) {
"ioremap failed for SLI4 HBA control registers.\n");
goto out_iounmap_conf;
}
+ phba->pci_bar2_memmap_p = phba->sli4_hba.ctrl_regs_memmap_p;
lpfc_sli4_bar1_register_memmap(phba);
}
if ((if_type == LPFC_SLI_INTF_IF_TYPE_0) &&
- (pci_resource_start(pdev, 4))) {
+ (pci_resource_start(pdev, PCI_64BIT_BAR4))) {
/*
* Map SLI4 if type 0 HBA Doorbell Register base to a kernel
* virtual address and setup the registers.
*/
- phba->pci_bar2_map = pci_resource_start(pdev, 4);
- bar2map_len = pci_resource_len(pdev, 4);
+ phba->pci_bar2_map = pci_resource_start(pdev, PCI_64BIT_BAR4);
+ bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4);
phba->sli4_hba.drbl_regs_memmap_p =
ioremap(phba->pci_bar2_map, bar2map_len);
if (!phba->sli4_hba.drbl_regs_memmap_p) {
"ioremap failed for SLI4 HBA doorbell registers.\n");
goto out_iounmap_ctrl;
}
+ phba->pci_bar4_memmap_p = phba->sli4_hba.drbl_regs_memmap_p;
error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
if (error)
goto out_iounmap_all;
lpfc_sli4_set_affinity(struct lpfc_hba *phba, int vectors)
{
int i, idx, saved_chann, used_chann, cpu, phys_id;
- int max_phys_id, num_io_channel, first_cpu;
+ int max_phys_id, min_phys_id;
+ int num_io_channel, first_cpu, chan;
struct lpfc_vector_map_info *cpup;
#ifdef CONFIG_X86
struct cpuinfo_x86 *cpuinfo;
phba->sli4_hba.num_present_cpu));
max_phys_id = 0;
+ min_phys_id = 0xff;
phys_id = 0;
num_io_channel = 0;
first_cpu = LPFC_VECTOR_MAP_EMPTY;
if (cpup->phys_id > max_phys_id)
max_phys_id = cpup->phys_id;
+ if (cpup->phys_id < min_phys_id)
+ min_phys_id = cpup->phys_id;
cpup++;
}
+ phys_id = min_phys_id;
/* Now associate the HBA vectors with specific CPUs */
for (idx = 0; idx < vectors; idx++) {
cpup = phba->sli4_hba.cpu_map;
for (i = 1; i < max_phys_id; i++) {
phys_id++;
if (phys_id > max_phys_id)
- phys_id = 0;
+ phys_id = min_phys_id;
cpu = lpfc_find_next_cpu(phba, phys_id);
if (cpu == LPFC_VECTOR_MAP_EMPTY)
continue;
goto found;
}
+ /* Use round robin for scheduling */
+ phba->cfg_fcp_io_sched = LPFC_FCP_SCHED_ROUND_ROBIN;
+ chan = 0;
+ cpup = phba->sli4_hba.cpu_map;
+ for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
+ cpup->channel_id = chan;
+ cpup++;
+ chan++;
+ if (chan >= phba->cfg_fcp_io_channel)
+ chan = 0;
+ }
+
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3329 Cannot set affinity:"
"Error mapping vector %d (%d)\n",
/* Spread vector mapping across multple physical CPU nodes */
phys_id++;
if (phys_id > max_phys_id)
- phys_id = 0;
+ phys_id = min_phys_id;
}
/*
* Base the remaining IO channel assigned, to IO channels already
* assigned to other CPUs on the same phys_id.
*/
- for (i = 0; i <= max_phys_id; i++) {
+ for (i = min_phys_id; i <= max_phys_id; i++) {
/*
* If there are no io channels already mapped to
* this phys_id, just round robin thru the io_channels.
if (num_io_channel != phba->sli4_hba.num_present_cpu)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3333 Set affinity mismatch:"
- "%d chann != %d cpus: %d vactors\n",
+ "%d chann != %d cpus: %d vectors\n",
num_io_channel, phba->sli4_hba.num_present_cpu,
vectors);
+ /* Enable using cpu affinity for scheduling */
phba->cfg_fcp_io_sched = LPFC_FCP_SCHED_BY_CPU;
return 1;
}
cfg_fail_out:
/* free the irq already requested */
- for (--index; index >= 0; index--)
+ for (--index; index >= 0; index--) {
+ irq_set_affinity_hint(phba->sli4_hba.msix_entries[index].
+ vector, NULL);
free_irq(phba->sli4_hba.msix_entries[index].vector,
&phba->sli4_hba.fcp_eq_hdl[index]);
+ }
msi_fail_out:
/* Unconfigure MSI-X capability structure */
int index;
/* Free up MSI-X multi-message vectors */
- for (index = 0; index < phba->cfg_fcp_io_channel; index++)
+ for (index = 0; index < phba->cfg_fcp_io_channel; index++) {
+ irq_set_affinity_hint(phba->sli4_hba.msix_entries[index].
+ vector, NULL);
free_irq(phba->sli4_hba.msix_entries[index].vector,
&phba->sli4_hba.fcp_eq_hdl[index]);
+ }
/* Disable MSI-X */
pci_disable_msix(phba->pcidev);
projects / karo-tx-linux.git / blobdiff