#include <linux/ethtool.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
-#include <linux/if_ether.h>
-#include "unicast.h"
#include "bridge_loop_avoidance.h"
#include "network-coding.h"
/* only modify transtable if it has been initialized before */
if (atomic_read(&bat_priv->mesh_state) == BATADV_MESH_ACTIVE) {
- batadv_tt_local_remove(bat_priv, old_addr,
+ batadv_tt_local_remove(bat_priv, old_addr, BATADV_NO_FLAGS,
"mac address changed", false);
- batadv_tt_local_add(dev, addr->sa_data, BATADV_NULL_IFINDEX);
+ batadv_tt_local_add(dev, addr->sa_data, BATADV_NO_FLAGS,
+ BATADV_NULL_IFINDEX);
}
return 0;
return 0;
}
+/**
+ * batadv_interface_set_rx_mode - set the rx mode of a device
+ * @dev: registered network device to modify
+ *
+ * We do not actually need to set any rx filters for the virtual batman
+ * soft interface. However a dummy handler enables a user to set static
+ * multicast listeners for instance.
+ */
+static void batadv_interface_set_rx_mode(struct net_device *dev)
+{
+}
+
static int batadv_interface_tx(struct sk_buff *skb,
struct net_device *soft_iface)
{
- struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
+ struct ethhdr *ethhdr;
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
struct batadv_hard_iface *primary_if = NULL;
struct batadv_bcast_packet *bcast_packet;
- struct vlan_ethhdr *vhdr;
- __be16 ethertype = __constant_htons(ETH_P_BATMAN);
+ __be16 ethertype = htons(ETH_P_BATMAN);
static const uint8_t stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00,
0x00, 0x00};
static const uint8_t ectp_addr[ETH_ALEN] = {0xCF, 0x00, 0x00, 0x00,
0x00, 0x00};
+ struct vlan_ethhdr *vhdr;
unsigned int header_len = 0;
int data_len = skb->len, ret;
- unsigned short vid __maybe_unused = BATADV_NO_FLAGS;
- bool do_bcast = false;
- uint32_t seqno;
unsigned long brd_delay = 1;
+ bool do_bcast = false, client_added;
+ unsigned short vid;
+ uint32_t seqno;
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE)
goto dropped;
soft_iface->trans_start = jiffies;
+ vid = batadv_get_vid(skb, 0);
+ ethhdr = (struct ethhdr *)skb->data;
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
vhdr = (struct vlan_ethhdr *)skb->data;
- vid = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK;
- vid |= BATADV_VLAN_HAS_TAG;
if (vhdr->h_vlan_encapsulated_proto != ethertype)
break;
ethhdr = (struct ethhdr *)skb->data;
/* Register the client MAC in the transtable */
- if (!is_multicast_ether_addr(ethhdr->h_source))
- batadv_tt_local_add(soft_iface, ethhdr->h_source, skb->skb_iif);
+ if (!is_multicast_ether_addr(ethhdr->h_source)) {
+ client_added = batadv_tt_local_add(soft_iface, ethhdr->h_source,
+ vid, skb->skb_iif);
+ if (!client_added)
+ goto dropped;
+ }
/* don't accept stp packets. STP does not help in meshes.
* better use the bridge loop avoidance ...
batadv_dat_snoop_outgoing_arp_reply(bat_priv, skb);
- ret = batadv_unicast_send_skb(bat_priv, skb);
- if (ret != 0)
+ if (is_multicast_ether_addr(ethhdr->h_dest))
+ ret = batadv_send_skb_via_gw(bat_priv, skb, vid);
+ else
+ ret = batadv_send_skb_via_tt(bat_priv, skb, vid);
+
+ if (ret == NET_XMIT_DROP)
goto dropped_freed;
}
struct sk_buff *skb, struct batadv_hard_iface *recv_if,
int hdr_size, struct batadv_orig_node *orig_node)
{
+ struct batadv_header *batadv_header = (struct batadv_header *)skb->data;
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
- struct ethhdr *ethhdr;
+ __be16 ethertype = htons(ETH_P_BATMAN);
struct vlan_ethhdr *vhdr;
- struct batadv_header *batadv_header = (struct batadv_header *)skb->data;
- unsigned short vid __maybe_unused = BATADV_NO_FLAGS;
- __be16 ethertype = __constant_htons(ETH_P_BATMAN);
+ struct ethhdr *ethhdr;
+ unsigned short vid;
bool is_bcast;
is_bcast = (batadv_header->packet_type == BATADV_BCAST);
skb_pull_rcsum(skb, hdr_size);
skb_reset_mac_header(skb);
+ vid = batadv_get_vid(skb, hdr_size);
ethhdr = eth_hdr(skb);
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
vhdr = (struct vlan_ethhdr *)skb->data;
- vid = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK;
- vid |= BATADV_VLAN_HAS_TAG;
if (vhdr->h_vlan_encapsulated_proto != ethertype)
break;
if (orig_node)
batadv_tt_add_temporary_global_entry(bat_priv, orig_node,
- ethhdr->h_source);
+ ethhdr->h_source, vid);
- if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest))
+ if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest,
+ vid))
goto dropped;
netif_rx(skb);
return;
}
+/**
+ * batadv_softif_vlan_free_ref - decrease the vlan object refcounter and
+ * possibly free it
+ * @softif_vlan: the vlan object to release
+ */
+void batadv_softif_vlan_free_ref(struct batadv_softif_vlan *softif_vlan)
+{
+ if (atomic_dec_and_test(&softif_vlan->refcount))
+ kfree_rcu(softif_vlan, rcu);
+}
+
+/**
+ * batadv_softif_vlan_get - get the vlan object for a specific vid
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vid: the identifier of the vlan object to retrieve
+ *
+ * Returns the private data of the vlan matching the vid passed as argument or
+ * NULL otherwise. The refcounter of the returned object is incremented by 1.
+ */
+struct batadv_softif_vlan *batadv_softif_vlan_get(struct batadv_priv *bat_priv,
+ unsigned short vid)
+{
+ struct batadv_softif_vlan *vlan_tmp, *vlan = NULL;
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(vlan_tmp, &bat_priv->softif_vlan_list, list) {
+ if (vlan_tmp->vid != vid)
+ continue;
+
+ if (!atomic_inc_not_zero(&vlan_tmp->refcount))
+ continue;
+
+ vlan = vlan_tmp;
+ break;
+ }
+ rcu_read_unlock();
+
+ return vlan;
+}
+
+/**
+ * batadv_create_vlan - allocate the needed resources for a new vlan
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vid: the VLAN identifier
+ *
+ * Returns 0 on success, a negative error otherwise.
+ */
+int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid)
+{
+ struct batadv_softif_vlan *vlan;
+ int err;
+
+ vlan = batadv_softif_vlan_get(bat_priv, vid);
+ if (vlan) {
+ batadv_softif_vlan_free_ref(vlan);
+ return -EEXIST;
+ }
+
+ vlan = kzalloc(sizeof(*vlan), GFP_ATOMIC);
+ if (!vlan)
+ return -ENOMEM;
+
+ vlan->vid = vid;
+ atomic_set(&vlan->refcount, 1);
+
+ atomic_set(&vlan->ap_isolation, 0);
+
+ err = batadv_sysfs_add_vlan(bat_priv->soft_iface, vlan);
+ if (err) {
+ kfree(vlan);
+ return err;
+ }
+
+ /* add a new TT local entry. This one will be marked with the NOPURGE
+ * flag
+ */
+ batadv_tt_local_add(bat_priv->soft_iface,
+ bat_priv->soft_iface->dev_addr, vid,
+ BATADV_NULL_IFINDEX);
+
+ spin_lock_bh(&bat_priv->softif_vlan_list_lock);
+ hlist_add_head_rcu(&vlan->list, &bat_priv->softif_vlan_list);
+ spin_unlock_bh(&bat_priv->softif_vlan_list_lock);
+
+ return 0;
+}
+
+/**
+ * batadv_softif_destroy_vlan - remove and destroy a softif_vlan object
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vlan: the object to remove
+ */
+static void batadv_softif_destroy_vlan(struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan)
+{
+ spin_lock_bh(&bat_priv->softif_vlan_list_lock);
+ hlist_del_rcu(&vlan->list);
+ spin_unlock_bh(&bat_priv->softif_vlan_list_lock);
+
+ batadv_sysfs_del_vlan(bat_priv, vlan);
+
+ /* explicitly remove the associated TT local entry because it is marked
+ * with the NOPURGE flag
+ */
+ batadv_tt_local_remove(bat_priv, bat_priv->soft_iface->dev_addr,
+ vlan->vid, "vlan interface destroyed", false);
+
+ batadv_softif_vlan_free_ref(vlan);
+}
+
+/**
+ * batadv_interface_add_vid - ndo_add_vid API implementation
+ * @dev: the netdev of the mesh interface
+ * @vid: identifier of the new vlan
+ *
+ * Set up all the internal structures for handling the new vlan on top of the
+ * mesh interface
+ *
+ * Returns 0 on success or a negative error code in case of failure.
+ */
+static int batadv_interface_add_vid(struct net_device *dev, __be16 proto,
+ unsigned short vid)
+{
+ struct batadv_priv *bat_priv = netdev_priv(dev);
+
+ /* only 802.1Q vlans are supported.
+ * batman-adv does not know how to handle other types
+ */
+ if (proto != htons(ETH_P_8021Q))
+ return -EINVAL;
+
+ vid |= BATADV_VLAN_HAS_TAG;
+
+ return batadv_softif_create_vlan(bat_priv, vid);
+}
+
+/**
+ * batadv_interface_kill_vid - ndo_kill_vid API implementation
+ * @dev: the netdev of the mesh interface
+ * @vid: identifier of the deleted vlan
+ *
+ * Destroy all the internal structures used to handle the vlan identified by vid
+ * on top of the mesh interface
+ *
+ * Returns 0 on success, -EINVAL if the specified prototype is not ETH_P_8021Q
+ * or -ENOENT if the specified vlan id wasn't registered.
+ */
+static int batadv_interface_kill_vid(struct net_device *dev, __be16 proto,
+ unsigned short vid)
+{
+ struct batadv_priv *bat_priv = netdev_priv(dev);
+ struct batadv_softif_vlan *vlan;
+
+ /* only 802.1Q vlans are supported. batman-adv does not know how to
+ * handle other types
+ */
+ if (proto != htons(ETH_P_8021Q))
+ return -EINVAL;
+
+ vlan = batadv_softif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG);
+ if (!vlan)
+ return -ENOENT;
+
+ batadv_softif_destroy_vlan(bat_priv, vlan);
+
+ /* finally free the vlan object */
+ batadv_softif_vlan_free_ref(vlan);
+
+ return 0;
+}
+
/* batman-adv network devices have devices nesting below it and are a special
* "super class" of normal network devices; split their locks off into a
* separate class since they always nest.
*/
static void batadv_softif_destroy_finish(struct work_struct *work)
{
+ struct batadv_softif_vlan *vlan;
struct batadv_priv *bat_priv;
struct net_device *soft_iface;
cleanup_work);
soft_iface = bat_priv->soft_iface;
+ /* destroy the "untagged" VLAN */
+ vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+ if (vlan) {
+ batadv_softif_destroy_vlan(bat_priv, vlan);
+ batadv_softif_vlan_free_ref(vlan);
+ }
+
batadv_sysfs_del_meshif(soft_iface);
rtnl_lock();
static int batadv_softif_init_late(struct net_device *dev)
{
struct batadv_priv *bat_priv;
+ uint32_t random_seqno;
int ret;
size_t cnt_len = sizeof(uint64_t) * BATADV_CNT_NUM;
#ifdef CONFIG_BATMAN_ADV_DAT
atomic_set(&bat_priv->distributed_arp_table, 1);
#endif
- atomic_set(&bat_priv->ap_isolation, 0);
- atomic_set(&bat_priv->vis_mode, BATADV_VIS_TYPE_CLIENT_UPDATE);
atomic_set(&bat_priv->gw_mode, BATADV_GW_MODE_OFF);
atomic_set(&bat_priv->gw_sel_class, 20);
- atomic_set(&bat_priv->gw_bandwidth, 41);
+ atomic_set(&bat_priv->gw.bandwidth_down, 100);
+ atomic_set(&bat_priv->gw.bandwidth_up, 20);
atomic_set(&bat_priv->orig_interval, 1000);
atomic_set(&bat_priv->hop_penalty, 30);
#ifdef CONFIG_BATMAN_ADV_DEBUG
atomic_set(&bat_priv->log_level, 0);
#endif
atomic_set(&bat_priv->fragmentation, 1);
+ atomic_set(&bat_priv->packet_size_max, ETH_DATA_LEN);
atomic_set(&bat_priv->bcast_queue_left, BATADV_BCAST_QUEUE_LEN);
atomic_set(&bat_priv->batman_queue_left, BATADV_BATMAN_QUEUE_LEN);
bat_priv->tt.last_changeset = NULL;
bat_priv->tt.last_changeset_len = 0;
+ /* randomize initial seqno to avoid collision */
+ get_random_bytes(&random_seqno, sizeof(random_seqno));
+ atomic_set(&bat_priv->frag_seqno, random_seqno);
+
bat_priv->primary_if = NULL;
bat_priv->num_ifaces = 0;
.ndo_open = batadv_interface_open,
.ndo_stop = batadv_interface_release,
.ndo_get_stats = batadv_interface_stats,
+ .ndo_vlan_rx_add_vid = batadv_interface_add_vid,
+ .ndo_vlan_rx_kill_vid = batadv_interface_kill_vid,
.ndo_set_mac_address = batadv_interface_set_mac_addr,
.ndo_change_mtu = batadv_interface_change_mtu,
+ .ndo_set_rx_mode = batadv_interface_set_rx_mode,
.ndo_start_xmit = batadv_interface_tx,
.ndo_validate_addr = eth_validate_addr,
.ndo_add_slave = batadv_softif_slave_add,
dev->netdev_ops = &batadv_netdev_ops;
dev->destructor = batadv_softif_free;
+ dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
dev->tx_queue_len = 0;
/* can't call min_mtu, because the needed variables
*/
dev->mtu = ETH_DATA_LEN;
/* reserve more space in the skbuff for our header */
- dev->hard_header_len = BATADV_HEADER_LEN;
+ dev->hard_header_len = batadv_max_header_len();
/* generate random address */
eth_hw_addr_random(dev);
{ "mgmt_tx_bytes" },
{ "mgmt_rx" },
{ "mgmt_rx_bytes" },
+ { "frag_tx" },
+ { "frag_tx_bytes" },
+ { "frag_rx" },
+ { "frag_rx_bytes" },
+ { "frag_fwd" },
+ { "frag_fwd_bytes" },
{ "tt_request_tx" },
{ "tt_request_rx" },
{ "tt_response_tx" },
projects / karo-tx-linux.git / blobdiff