From: Lothar Waßmann <LW@KARO-electronics.de>
Date: Mon, 23 Oct 2017 12:26:17 +0000 (+0200)
Subject: ARM: dts: imx53-tx53: fix interrupt flags
X-Git-Tag: KARO-TX6-2017-10-26~5^2
X-Git-Url: https://git.karo-electronics.de/?p=karo-tx-linux.git;a=commitdiff_plain;h=17eb7a9981cb63ddd9ddcda5e40c4341240388ef

ARM: dts: imx53-tx53: fix interrupt flags

Some interrupts properties are given '0' as the flags argument or no
flags argument at all.
Change them to use the appropriate interrupt flags.
---

diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index aa9ae84d2659..eb5b452699a9 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -254,7 +254,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tsc2007>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <26 0>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <660>;
 		wakeup-source;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 8e10c4757770..71b58b6933e1 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -227,7 +227,7 @@
 
 	phy0: ethernet-phy@0 {
 		interrupt-parent = <&gpio2>;
-		interrupts = <4>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 		device_type = "ethernet-phy";
 	};
 };
@@ -247,7 +247,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ds1339>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		trickle-resistor-ohms = <250>;
 		trickle-diode-disable;
 	};