From: Boris Brezillon Date: Wed, 23 Aug 2017 18:45:01 +0000 (+0200) Subject: mtd: nand: atmel: Relax tADL_min constraint X-Git-Tag: v4.13-rc7~19^2 X-Git-Url: https://git.karo-electronics.de/?p=karo-tx-linux.git;a=commitdiff_plain;h=be3e83e3471cd0faff2c2d88fe9cfc73d9a9745a mtd: nand: atmel: Relax tADL_min constraint Version 4 of the ONFI spec mandates that tADL be at least 400 nanoseconds, but, depending on the master clock rate, 400 ns may not fit in the tADL field of the SMC reg. We need to relax the check and accept the -ERANGE return code. Note that previous versions of the ONFI spec had a lower tADL_min (100 or 200 ns). It's not clear why this timing constraint got increased but it seems most NANDs are fine with values lower than 400ns, so we should be safe. Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks") Signed-off-by: Boris Brezillon Tested-by: Quentin Schulz Signed-off-by: Brian Norris --- diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c index 2c8baa0c2c4e..ceec21bd30c4 100644 --- a/drivers/mtd/nand/atmel/nand-controller.c +++ b/drivers/mtd/nand/atmel/nand-controller.c @@ -1364,7 +1364,18 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, ret = atmel_smc_cs_conf_set_timing(smcconf, ATMEL_HSMC_TIMINGS_TADL_SHIFT, ncycles); - if (ret) + /* + * Version 4 of the ONFI spec mandates that tADL be at least 400 + * nanoseconds, but, depending on the master clock rate, 400 ns may not + * fit in the tADL field of the SMC reg. We need to relax the check and + * accept the -ERANGE return code. + * + * Note that previous versions of the ONFI spec had a lower tADL_min + * (100 or 200 ns). It's not clear why this timing constraint got + * increased but it seems most NANDs are fine with values lower than + * 400ns, so we should be safe. + */ + if (ret && ret != -ERANGE) return ret; ncycles = DIV_ROUND_UP(conf->timings.sdr.tAR_min, mckperiodps);