Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A small collection of fixes that should go into this series. This
contains:
- NVMe pull request from Christoph, with various fixes for nvme
proper and nvme-fc.
- disable runtime PM for blk-mq for now.
With scsi now defaulting to using blk-mq, this reared its head as
an issue. Longer term we'll fix up runtime PM for blk-mq, for now
just disable it to prevent a hang on laptop resume for some folks.
- blk-mq CPU <-> hw queue map fix from Christoph.
- xen/blkfront pull request from Konrad, with two small fixes for the
blkfront driver.
- a few fixups for nbd from Joseph.
- a stable fix for pblk from Javier"
* 'for-linus' of git://git.kernel.dk/linux-block:
lightnvm: pblk: advance bio according to lba index
nvme: validate admin queue before unquiesce
nbd: clear disconnected on reconnect
nvme-pci: fix HMB size calculation
nvme-fc: revise TRADDR parsing
nvme-fc: address target disconnect race conditions in fcp io submit
nvme: fabrics commands should use the fctype field for data direction
nvme: also provide a UUID in the WWID sysfs attribute
xen/blkfront: always allocate grants first from per-queue persistent grants
xen-blkfront: fix mq start/stop race
blk-mq: map queues to all present CPUs
block: disable runtime-pm for blk-mq
xen-blkfront: Fix handling of non-supported operations
nbd: only set sndtimeo if we have a timeout set
nbd: take tx_lock before disconnecting
nbd: allow multiple disconnects to be sent
Merge tag 'mmc-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.13-rc1.
I have also included a couple of cleanup patches in this pull request
for OMAP2+, related to the omap_hsmmc driver. The reason is because of
the changes are also depending on OMAP SoC specific code, so this
simplifies how to deal with this.
Summary:
MMC host:
- sunxi: Correct time phase settings
- omap_hsmmc: Clean up some dead code
- dw_mmc: Fix message printed for deprecated num-slots DT binding
- dw_mmc: Fix DT documentation"
* tag 'mmc-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
Documentation: dw-mshc: deprecate num-slots
mmc: dw_mmc: fix the wrong condition check of getting num-slots from DT
mmc: host: omap_hsmmc: remove unused platform callbacks
ARM: OMAP2+: hsmmc.c: Remove dead code
mmc: sunxi: Keep default timing phase settings for new timing mode
Javier González [Fri, 28 Jul 2017 13:13:16 +0000 (15:13 +0200)]
lightnvm: pblk: advance bio according to lba index
When a lba either hits the cache or corresponds to an empty entry in the
L2P table, we need to advance the bio according to the position in which
the lba is located. Otherwise, we will copy data in the wrong page, thus
causing data corruption for the application.
In case of a cache hit, we assumed that bio->bi_iter.bi_idx would
contain the correct index, but this is no necessarily true. Instead, use
the local bio advance counter and iterator. This guarantees that lbas
hitting the cache are copied into the right bv_page.
In case of an empty L2P entry, we omitted to advance the bio. In the
cases when the same I/O also contains a cache hit, data corresponding
to this lba will be copied to the wrong bv_page. Fix this by advancing
the bio as we do in the case of a cache hit.
Merge tag 'drm-fixes-for-v4.13-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"These iare the fixes for 4.13-rc3: vmwgfx, exynos, i915, amdgpu,
nouveau, host1x and displayport fixes.
As expected people woke up this week, i915 didn't do an -rc2 pull so
got a bumper -rc3 pull, and Ben resurfaced on nouveau and fixed a
bunch of major crashers seen on Fedora 26, and there are a few vmwgfx
fixes as well.
Otherwise exynos had some regression fixes/cleanups, and amdgpu has an
rcu locking regression fix and a couple of minor fixes"
* tag 'drm-fixes-for-v4.13-rc3' of git://people.freedesktop.org/~airlied/linux: (44 commits)
drm/i915: Fix bad comparison in skl_compute_plane_wm.
drm/i915: Force CPU synchronisation even if userspace requests ASYNC
drm/i915: Only skip updating execobject.offset after error
drm/i915: Only mark the execobject as pinned on success
drm/i915: Remove assertion from raw __i915_vma_unpin()
drm/i915/cnl: Fix loadgen select programming on ddi vswing sequence
drm/i915: Fix scaler init during CRTC HW state readout
drm/i915/selftests: Fix an error handling path in 'mock_gem_device()'
drm/i915: Unbreak gpu reset vs. modeset locking
gpu: host1x: Free the IOMMU domain when there is no device to attach
drm/i915: Fix cursor updates on some platforms
drm/i915: Fix user ptr check size in eb_relocate_vma()
drm: exynos: mark pm functions as __maybe_unused
drm/exynos: select CEC_CORE if CEC_NOTIFIER
drm/exynos/hdmi: fix disable sequence
drm/exynos: mic: add a bridge at probe
drm/exynos/dsi: Remove error handling for bridge_node DT parsing
drm/exynos: dsi: do not try to find bridge
drm: exynos: hdmi: make of_device_ids const.
drm: exynos: constify mixer_match_types and *_mxr_drv_data.
...
Dave Airlie [Fri, 28 Jul 2017 02:32:59 +0000 (12:32 +1000)]
Merge tag 'exynos-drm-fixes-for-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Summary:
- fix probing fail issue of dsi driver without bridge device.
- fix disable sequence of hdmi driver.
- trivial cleanups.
* tag 'exynos-drm-fixes-for-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm: exynos: mark pm functions as __maybe_unused
drm/exynos: select CEC_CORE if CEC_NOTIFIER
drm/exynos/hdmi: fix disable sequence
drm/exynos: mic: add a bridge at probe
drm/exynos/dsi: Remove error handling for bridge_node DT parsing
drm/exynos: dsi: do not try to find bridge
drm: exynos: hdmi: make of_device_ids const.
drm: exynos: constify mixer_match_types and *_mxr_drv_data.
exynos_drm: Clean up duplicated assignment in exynos_drm_driver
Dave Airlie [Fri, 28 Jul 2017 00:19:08 +0000 (10:19 +1000)]
Merge tag 'drm-intel-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
i915 fixes for -rc3
Bit more than usual since we missed -rc2. 4x cc: stable, 2 gvt
patches, but all fairly minor stuff. Last minute rebase was to add a
few missing cc: stable, I did prep the pull this morning already and
made sure CI approves.
* tag 'drm-intel-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Fix bad comparison in skl_compute_plane_wm.
drm/i915: Force CPU synchronisation even if userspace requests ASYNC
drm/i915: Only skip updating execobject.offset after error
drm/i915: Only mark the execobject as pinned on success
drm/i915: Remove assertion from raw __i915_vma_unpin()
drm/i915/cnl: Fix loadgen select programming on ddi vswing sequence
drm/i915: Fix scaler init during CRTC HW state readout
drm/i915/selftests: Fix an error handling path in 'mock_gem_device()'
drm/i915: Unbreak gpu reset vs. modeset locking
drm/i915: Fix cursor updates on some platforms
drm/i915: Fix user ptr check size in eb_relocate_vma()
drm/i915/gvt: Extend KBL platform support in GVT-g
drm/i915/gvt: Fix the vblank timer close issue after shutdown VMs in reverse
Dave Airlie [Fri, 28 Jul 2017 00:14:08 +0000 (10:14 +1000)]
Merge tag 'drm-misc-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Core Changes:
- dp: A few fixes in drm_dp_downstream_debug() (Chris)
- rockchip: sanitize the Kconfig dependencies (fallout from EXTCON) (Arnd)
- host1x: Free the iommu domain when attach_device fails (Paul)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Kocialkowski <contact@paulk.fr>
* tag 'drm-misc-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-misc:
gpu: host1x: Free the IOMMU domain when there is no device to attach
drm/rockchip: fix Kconfig dependencies
drm/dp: Don't trust drm_dp_downstream_id()
drm/dp: Fix read pointer for drm_dp_downsteam_debug()
Merge tag 'acpi-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are two fixups for the suspend-to-idle handling in the ACPI
subsystem after recent changes in that area and two simple fixes of
the ACPI NUMA code.
Specifics:
- Add an ACPI module parameter to allow users to override the new
default behavior on some systems where the EC GPE is not disabled
during suspend-to-idle in case the EC on their systems generates
excessive wakeup events and they want to sacrifice some
functionality (like power button wakeups) for extra battery life
while suspended (Rafael Wysocki).
- Fix flushing of the outstanding EC work in the ACPI core
suspend-to-idle code (Rafael Wysocki).
- Add a missing include and fix a messed-up comment in the ACPI NUMA
code (Ross Zwisler)"
* tag 'acpi-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: NUMA: Fix typo in the full name of SRAT
ACPI: NUMA: add missing include in acpi_numa.h
ACPI / PM / EC: Flush all EC work in acpi_freeze_sync()
ACPI / EC: Add parameter to force disable the GPE on suspend
Chris Wilson [Fri, 21 Jul 2017 14:50:37 +0000 (15:50 +0100)]
drm/i915: Force CPU synchronisation even if userspace requests ASYNC
The goal here was to minimise doing any thing or any check inside the
kernel that was not strictly required. For a userspace that assumes
complete control over the cache domains, the kernel is usually using
outdated information and may trigger clflushes where none were
required.
However, swapping is a situation where userspace has no knowledge of the
domain transfer, and will leave the object in the CPU cache. The kernel
must flush this out to the backing storage prior to use with the GPU. As
we use an asynchronous task tracked by an implicit fence for this, we
also need to cancel the ASYNC flag on the object so that the object will
wait for the clflush to complete before being executed. This also absolves
userspace of the responsibility imposed by commit 77ae9957897d ("drm/i915:
Enable userspace to opt-out of implicit fencing") that its needed to ensure
that the object was out of the CPU cache prior to use on the GPU.
Fixes: 77ae9957897d ("drm/i915: Enable userspace to opt-out of implicit fencing")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101571 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-5-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 0f46daa1a273779a0b73d768a788ca3f04238f9c) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 21 Jul 2017 14:50:36 +0000 (15:50 +0100)]
drm/i915: Only skip updating execobject.offset after error
I was being overly paranoid in not updating the execobject.offset after
performing the fallback copy where we set reloc.presumed_offset to -1.
The thinking was to ensure that a subsequent NORELOC execbuf would be
forced to process the invalid relocations. However this is overkill so
long as we *only* update the execobject.offset following a successful
update of the relocation value witin the batch. If we have to repeat the
execbuf due to a later interruption, then we may skip the relocations on
the second pass (honouring NORELOC) since the execobject.offset match
the actual offsets (even though reloc.presumed_offset is garbage).
Subsequent calls to execbuf with NORELOC should themselves ensure that
the reloc.presumed_offset have been corrected in case of future
migration.
Reporting back the actual execobject.offset, even when
reloc.presumed_offset is garbage, ensures that reuse of those objects
use the latest information to avoid relocations.
Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101635 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-4-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 1f727d9e725a408ef58d159c20fb2e51818ff153) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 21 Jul 2017 14:50:35 +0000 (15:50 +0100)]
drm/i915: Only mark the execobject as pinned on success
If we fail to acquire a fence (for old school fenced GPU access) then we
unwind the vma reservation, including its pin. However, we were making
the execobject as holding the pin before erring out, leading to a double
unpin:
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-3-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 1da7b54c46bcfe5484af0b27d8c9003b238031b0) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 21 Jul 2017 14:50:34 +0000 (15:50 +0100)]
drm/i915: Remove assertion from raw __i915_vma_unpin()
After we detect a i915_vma pin overflow, we call __i915_vma_unpin to
cleanup. However, on an overflow the pin_count bitfield will be zero,
triggering an assertion, even though we the intention is to merely warn
and report the error back to the user (as historically the culprit has
be a leak in the display code).
Fixes: 20dfbde463c8 ("drm/i915: Wrap vma->pin_count accessors with small inline helpers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-2-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 67fddd902b8e37b15a905c287ce4e40f52a564af) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915/cnl: Fix loadgen select programming on ddi vswing sequence
The condition for setting the Loadgen Select bit of
PORT_TX_DW4 register during DDI Vswing Sequence should be
Bit rate <=6 GHz whereas the existing code checks only
Bit Rate < 6GHz. This patch fixes this condition.
While at it also remove the redundant paranthesis.
Fixes: cf54ca8bc567 ("drm/i915/cnl: Implement voltage swing sequence.") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500329122-32662-1-git-send-email-manasi.d.navare@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit a8e45a1c42d11597e975f3e5f2fe182f90cdaa7f) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Thu, 20 Jul 2017 11:28:20 +0000 (14:28 +0300)]
drm/i915: Fix scaler init during CRTC HW state readout
The scaler allocation code depends on a non-zero default value for the
crtc scaler_id, so make sure we initialize the scaler state accordingly
even if the crtc is off. This fixes at least an initial YUV420 modeset
(added in a follow-up patchset by Shashank) when booting with the screen
off: after the initial HW readout and modeset which enables the scaler a
subsequent modeset will disable the scaler which isn't properly
allocated. This results in a funky HW state where the pipe scaler HW
registers can't be modified and the normally black screen is grey and
shifted to the right or jitters.
The problem was revealed by Shashank's YUV420 patchset and first
reported by Ville.
v2:
- In the stable tag also include versions which need backporting (Jani)
Cc: Jani Nikula <jani.nikula@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chandra Konduru <chandra.konduru@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # 4.2.x Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: a1b2278e4dfc ("drm/i915: skylake panel fitting using shared scalers") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720112820.26816-1-imre.deak@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 5fb9dadf336f3590c799e8cbde348215dccc2aa2) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 19 Jul 2017 12:54:55 +0000 (14:54 +0200)]
drm/i915: Unbreak gpu reset vs. modeset locking
Taking the modeset locks unconditionally isn't the greatest idea,
because atm that part is still broken and times out (and then atomic
keels over). And there's really no reason to do so, the old code
didn't do that either.
To make the patch a bit simpler let's also nuke 2 cases that are only
around for the old mmioflip paths. Atomic nonblocking workers will not
die (minus bugs) when a gpu reset happens.
And of course this doesn't fix any of the gpu reset vs. modeset
deadlock fun, but it at least stop modern CI machines from keeling
over all over the place for no reason at all.
And we still have the explicit testcases to run the fake gpu reset, so
coverage isn't that much worse.
v2: Split out additional changes on top, restrict this to purely reducing
the critical section of modeset locks.
v2: Review from Maarten
- update comments
- don't oops when state is NULL in intel_finish_reset, but try to at
least still drop locks properly. The hw is going to be toast anyway.
Fixes: 739748939974 ("drm/i915: Fix modeset handling during gpu reset, v5.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170719125502.25696-3-daniel.vetter@ffwll.ch
(cherry picked from commit ce87ea15ebc60a9f8f156b2549f7b2cf7fe48d04) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Merge branch 'parisc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- The majority of lines changed are due to regenerated defconfig files.
- The support for the Page Deallocation Table (PDT) which was merged in
the merge window for 4.13 contained a bug which crashes the kernel if
a bad page is reported by firmware. This is now fixed and the kernel
messages will show which memory slot holds the broken DIMM.
- Commit 3a166fc2d4ef ("kbuild: handle libs-y archives separately from
built-in.o archives") broke linking the parisc kernel due to
millicode symbols which can't be reached then any longer. This was
fixed by modifying the parisc vmlinux.lds linker script.
- If the stack checker panics on stack overflow, avoid recursive
panics.
- Some parisc machines can't physically power off and thus instead
start after some time to flood the console by presumably detected
soft lockups. Avoid this by disabling the lockup detectors before
entering the endless for-next loop.
- Dave Anglin provided fixes which prevents TLB speculation on flushed
pages on PA8800/PA9000 CPUs.
- Arvind Yadav sent a trivial patch to constify the attribute_group
structure in our firmware on-board-flash storage driver
(pdc_stable.c)
* 'parisc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Extend disabled preemption in copy_user_page
parisc: Prevent TLB speculation on flushed pages on CPUs that only support equivalent aliases
parisc: Suspend lockup detectors before system halt
parisc: Show DIMM slot number which holds broken memory module
parisc: Add function to return DIMM slot of physical address
parisc: Fix crash when calling PDC_PAT_MEM PDT firmware function
parisc: regenerate defconfig files
parisc: pdc_stable: constify attribute_group structures.
parisc: Merge millicode routines via linker script
parisc: Disable further stack checks when panic occurs during stack check
Merge tag 'sound-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This is a pretty boring pull request, containing a few HD-audio quirks
and ID updates as usual suspects, as well as a fix for a regression of
FM801 chip on ia64 (what a legacy combination!)"
* tag 'sound-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add mute led support for HP ProBook 440 G4
ALSA: hda/realtek - No loopback on ALC225/ALC295 codec
ALSA: hda/realtek - Update headset mode for ALC225
ALSA: fm801: Initialize chip after IRQ handler is registered
ALSA: hda/realtek - Update headset mode for ALC298
ALSA: hda - Add missing NVIDIA GPU codec IDs to patch table
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Two areas addressed by these fixes:
- Fixes from Dave Martin for the signal frames that were broken with
certain configurations. No one noticed until recently.
- More kexec fixes to ensure that the crashkernel region is correctly
allocated, and a fix for the location of the device tree when
several kexec kernels are loaded"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8687/1: signal: Fix unparseable iwmmxt_sigframe in uc_regspace[]
ARM: 8686/1: iwmmxt: Add missing __user annotations to sigframe accessors
ARM: kexec: fix failure to boot crash kernel
ARM: kexec: avoid allocating crashkernel region outside lowmem
gpu: host1x: Free the IOMMU domain when there is no device to attach
When there is no device to attach to the IOMMU domain, as may be the
case when the device-tree does not contain the proper iommu node, it is
best to keep going without IOMMU support rather than failing.
This allows the driver to probe and function instead of taking down
all of the tegra drm driver, leading to missing display support.
Shawn Lin [Tue, 18 Jul 2017 08:31:38 +0000 (16:31 +0800)]
Documentation: dw-mshc: deprecate num-slots
dwmmc host driver already deprecate it in the driver
but didn't modify the documentation to reflect the fact.
This patch deprecates it and clean up num-slots from the
examples of all variant host drivers.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Fixes: d30a8f7bdf64 ("mmc: dw_mmc: deprecated the "num-slots" property") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ville Syrjälä [Fri, 14 Jul 2017 15:52:27 +0000 (18:52 +0300)]
drm/i915: Fix cursor updates on some platforms
Turns out that just writing CURPOS isn't sufficient to move the cursor
on some platforms. My 830 works just fine, but eg. 945 and PNV don't.
On those platforms we need to arm even the CURPOS update with a
CURBASE write.
Even worse, a write to any of the cursor register apart from CURBASE
will cancel an already pending cursor update. So if we have armed a
CURCNTR/CURBASE update, a subsequent CURPOS write prior to vblank
would cancel that armed update. Thus we're left with a cursor that
doesn't appear to move, or even change shape.
Fix the problem by always performing the CURBASE write after a
CURPOS write. Bspec is somewhat unclear which platforms actually
require this CURBASE write and which don't. So to keep it simple
and to make sure we really fix the problem across all supported
devices, let's just perform the CURBASE write unconditionally.
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101790 Fixes: 75343a44c901 ("drm/i915: Drop useless posting reads from cursor commit") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170714155227.6089-1-ville.syrjala@linux.intel.com
(cherry picked from commit 8753d2bc5e49daad301ce65f5dada57ed924fad6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Fri, 14 Jul 2017 15:12:42 +0000 (18:12 +0300)]
drm/i915: Fix user ptr check size in eb_relocate_vma()
Fix the sizeof(ptr) vs. sizeof(*ptr) typo.
Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170714151242.517-2-imre.deak@intel.com
(cherry picked from commit edd9003f7f9dddd28fdd768e6e7569d996c769cb) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The rework of the exynos DRM clock handling introduced
warnings for configurations that have CONFIG_PM disabled:
drivers/gpu/drm/exynos/exynos_hdmi.c:736:13: error: 'hdmi_clk_disable_gates' defined but not used [-Werror=unused-function]
static void hdmi_clk_disable_gates(struct hdmi_context *hdata)
^~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/exynos/exynos_hdmi.c:717:12: error: 'hdmi_clk_enable_gates' defined but not used [-Werror=unused-function]
static int hdmi_clk_enable_gates(struct hdmi_context *hdata)
The problem is that the PM functions themselves are inside of
an #ifdef, but some functions they call are not.
This patch removes the #ifdef and instead marks the PM functions
as __maybe_unused, which is a more reliable way to get it right.
Hans Verkuil [Mon, 17 Jul 2017 11:48:14 +0000 (13:48 +0200)]
drm/exynos: select CEC_CORE if CEC_NOTIFIER
If the s5p-cec driver is a module and the drm exynos driver is built-in, then
the CEC core will be a module also, causing the CEC notifier to fail (will be
compiled as empty functions).
To prevent this select CEC_CORE if CEC_NOTIFIER is set to ensure the CEC core
is also built into the kernel.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Wed, 12 Jul 2017 10:01:23 +0000 (12:01 +0200)]
drm/exynos/hdmi: fix disable sequence
The "Fixes" patch was incorrectly merged, as a result PHY is prematurely
powered off and for example Odroid-U3 cannot disable TV power domain
when HDMI cable is unplugged.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 625e63e2 ("drm/exynos/hdmi: fix pipeline disable order") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Hoegeun Kwon [Wed, 21 Jun 2017 10:51:43 +0000 (19:51 +0900)]
drm/exynos/dsi: Remove error handling for bridge_node DT parsing
Remove the error handling of bridge_node because the bridge_node is
optional.
For example, In case of Exynos SoC, a bridge device such as mDNIe and
MIC could be placed between Display Controller and MIPI DSI device but
the bridge device is optional.
Arvind Yadav [Mon, 19 Jun 2017 09:24:03 +0000 (14:54 +0530)]
drm: exynos: hdmi: make of_device_ids const.
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
12294 1192 0 13486 34ae drivers/gpu/drm/exynos/exynos_hdmi.o
File size after constify hdmi_match_types.
text data bss dec hex filename
13318 176 0 13494 34b6 drivers/gpu/drm/exynos/exynos_hdmi.o
Dave Airlie [Wed, 26 Jul 2017 22:49:48 +0000 (08:49 +1000)]
Merge branch 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Three misc amd fixes.
* 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: fix AVFS voltage offset for Vega10
drm/amdgpu/gfx9: simplify and fix GRBM index selection
drm/amdgpu: Fix blocking in RCU critical section(v2)
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes and cleanups from Michael Tsirkin:
"Fixes some minor issues all over the codebase"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-net: fix module unloading
virtio-balloon: coding format cleanup
virtio-balloon: deflate via a page list
virtio_blk: Use sysfs_match_string() helper
Scott Bauer [Tue, 25 Jul 2017 16:27:06 +0000 (10:27 -0600)]
nvme: validate admin queue before unquiesce
With a misbehaving controller it's possible we'll never
enter the live state and create an admin queue. When we
fail out of reset work it's possible we failed out early
enough without setting up the admin queue. We tear down
queues after a failed reset, but needed to do some more
sanitization.
Fixes 443bd90f2cca: "nvme: host: unquiesce queue in nvme_kill_queues()"
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes.
The transfer size fixes are actually correcting some performance drops
on the hpsa and smartpqi cards. The cards actually have an internal
cache for request speed up but bypass it for transfers > 1MB. Since
4.3 the efficiency of our merges has rendered the cache mostly unused,
so limit transfers to under 1MB to recover the cache boost"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: smartpqi: limit transfer length to 1MB
scsi: hpsa: limit transfer length to 1MB
Merge tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid
Pull uuid fixes from Christoph Hellwig:
- add a missing "!" in the uuid tests
- remove the last remaining user of the uuid_be type, and then the type
and its helpers
* tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid:
uuid: remove uuid_be
thunderbolt: use uuid_t instead of uuid_be
uuid: fix incorrect uuid_equal conversion in test_uuid_test
Merge tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma mapping fixes from Christoph Hellwig:
"split the global dma coherent pool from the per-device pool.
This fixes a regression in the earlier 4.13 pull requests where the
global pool would override a per-device CMA pool (Vladimir Murzin)"
* tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping:
ARM: NOMMU: Wire-up default DMA interface
dma-coherent: introduce interface for default DMA pool
parisc: Extend disabled preemption in copy_user_page
It's always bothered me that we only disable preemption in
copy_user_page around the call to flush_dcache_page_asm.
This patch extends this to after the copy.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de>
parisc: Prevent TLB speculation on flushed pages on CPUs that only support equivalent aliases
Helge noticed that we flush the TLB page in flush_cache_page but not in
flush_cache_range or flush_cache_mm.
For a long time, we have had random segmentation faults building
packages on machines with PA8800/8900 processors. These machines only
support equivalent aliases. We don't see these faults on machines that
don't require strict coherency. So, it appears TLB speculation
sometimes leads to cache corruption on machines that require coherency.
This patch adds TLB flushes to flush_cache_range and flush_cache_mm when
coherency is required. We only flush the TLB in flush_cache_page when
coherency is required.
The patch also optimizes flush_cache_range. It turns out we always have
the right context to use flush_user_dcache_range_asm and
flush_user_icache_range_asm.
The patch has been tested for some time on rp3440, rp3410 and A500-44.
It's been boot tested on c8000. No random segmentation faults were
observed during testing.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de>
Eric Huang [Mon, 17 Jul 2017 21:18:33 +0000 (17:18 -0400)]
drm/amd/powerplay: fix AVFS voltage offset for Vega10
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/gfx9: simplify and fix GRBM index selection
Copy the approach taken by gfx8, which simplifies the code, and set the
instance index properly. The latter is required for debugging, e.g. for
reading wave status by UMR.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josef Bacik [Tue, 25 Jul 2017 17:31:19 +0000 (13:31 -0400)]
nbd: clear disconnected on reconnect
If our device loses its connection for longer than the dead timeout we
will set NBD_DISCONNECTED in order to quickly fail any pending IO's that
flood in after the IO's that were waiting during the dead timer.
However if we re-connect at some point in the future we'll still see
this DISCONNECTED flag set if we then lose our connection again after
that, which means we won't get notifications for our newly lost
connections. Fix this by just clearing the DISCONNECTED flag on
reconnect in order to make sure everything works as it's supposed to.
Reported-by: Dan Melnic <dmm@fb.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
parisc: Suspend lockup detectors before system halt
Some machines can't power off the machine, so disable the lockup detectors to
avoid this watchdog BUG to show up every few seconds:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-shutdow:1]
parisc: Show DIMM slot number which holds broken memory module
The Page Deallocation Table (PDT) holds the physical addresses of all broken
memory addresses. With the physical address we now are able to show which DIMM
slot (e.g. 1a, 3c) actually holds the broken memory module so that users are
able to replace it.
parisc: Add function to return DIMM slot of physical address
Add a firmware wrapper function, which asks PDC firmware for the DIMM slot of a
physical address. This is needed to show users which DIMM module needs
replacement in case a broken DIMM was encountered.
parisc: Fix crash when calling PDC_PAT_MEM PDT firmware function
Commit c9c2877d08d9 ("parisc: Add Page Deallocation Table (PDT) support")
introduced the pdc_pat_mem_read_pd_pdt() firmware helper function, which
crashed the system because it trashed the stack if the
pdc_pat_mem_read_pd_retinfo struct was located on the stack (and which is
in size less than the required 32 64-bit values).
Fix it by using the pdc_result struct instead when calling firmware and copy
the return values back into the result struct when finished sucessfully.
While debugging this code I noticed that the pdc_type wasn't set correctly
either, so let's fix that too.
It's possible the preferred HMB size may not be a multiple of the
chunk_size. This patch moves len to function scope and uses that in
the for loop increment so the last iteration doesn't cause the total
size to exceed the allocated HMB size.
Based on an earlier patch from Keith Busch.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
James Smart [Mon, 17 Jul 2017 20:59:39 +0000 (13:59 -0700)]
nvme-fc: revise TRADDR parsing
The FC-NVME spec hasn't locked down on the format string for TRADDR.
Currently the spec is lobbying for "nn-<16hexdigits>:pn-<16hexdigits>"
where the wwn's are hex values but not prefixed by 0x.
Most implementations so far expect a string format of
"nn-0x<16hexdigits>:pn-0x<16hexdigits>" to be used. The transport
uses the match_u64 parser which requires a leading 0x prefix to set
the base properly. If it's not there, a match will either fail or return
a base 10 value.
The resolution in T11 is pushing out. Therefore, to fix things now and
to cover any eventuality and any implementations already in the field,
this patch adds support for both formats.
The change consists of replacing the token matching routine with a
routine that validates the fixed string format, and then builds
a local copy of the hex name with a 0x prefix before calling
the system parser.
Note: the same parser routine exists in both the initiator and target
transports. Given this is about the only "shared" item, we chose to
replicate rather than create an interdendency on some shared code.
Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
James Smart [Tue, 18 Jul 2017 21:29:34 +0000 (14:29 -0700)]
nvme-fc: address target disconnect race conditions in fcp io submit
There are cases where threads are in the process of submitting new
io when the LLDD calls in to remove the remote port. In some cases,
the next io actually goes to the LLDD, who knows the remoteport isn't
present and rejects it. To properly recovery/restart these i/o's we
don't want to hard fail them, we want to treat them as temporary
resource errors in which a delayed retry will work.
Add a couple more checks on remoteport connectivity and commonize the
busy response handling when it's seen.
Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme: also provide a UUID in the WWID sysfs attribute
The WWID sysfs attribute can provide multiple means of a World Wide ID
for a NVMe device. It can either be a NGUID, a EUI-64 or a concatenation
of VID, Serial Number, Model and the Namespace ID in this order of
preference.
If the target also sends us a UUID use the UUID for identification and
give it the highest priority.
This eases generation of /dev/disk/by-* symlinks.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Three bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: set change and reference bit on lazy key enablement
s390: chp: handle CRW_ERC_INIT for channel-path status change
s390/perf: fix problem state detection
Dongli Zhang [Wed, 28 Jun 2017 12:57:28 +0000 (20:57 +0800)]
xen/blkfront: always allocate grants first from per-queue persistent grants
This patch partially reverts 3df0e50 ("xen/blkfront: pseudo support for
multi hardware queues/rings"). The xen-blkfront queue/ring might hang due
to grants allocation failure in the situation when gnttab_free_head is
almost empty while many persistent grants are reserved for this queue/ring.
As persistent grants management was per-queue since 73716df ("xen/blkfront:
make persistent grants pool per-queue"), we should always allocate from
persistent grants first.
Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Junxiao Bi [Thu, 20 Jul 2017 01:26:21 +0000 (09:26 +0800)]
xen-blkfront: fix mq start/stop race
When ring buf full, hw queue will be stopped. While blkif interrupt consume
request and make free space in ring buf, hw queue will be started again.
But since start queue is protected by spin lock while stop not, that will
cause a race.
If ring buf is made empty in this case, interrupt will never come, then the
hw queue will be stopped forever, all processes waiting for the pending io
in the queue will hung.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Andrew Jones [Mon, 24 Jul 2017 13:38:32 +0000 (15:38 +0200)]
virtio-net: fix module unloading
Unregister the driver before removing multi-instance hotplug
callbacks. This order avoids the warning issued from
__cpuhp_remove_state_cpuslocked when the number of remaining
instances isn't yet zero.
Fixes: 8017c279196a ("net/virtio-net: Convert to hotplug state machine") Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Liang Li [Wed, 12 Jul 2017 12:40:14 +0000 (20:40 +0800)]
virtio-balloon: deflate via a page list
This patch saves the deflated pages to a list, instead of the PFN array.
Accordingly, the balloon_pfn_to_page() function is removed.
Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Andy Shevchenko [Fri, 9 Jun 2017 12:07:42 +0000 (15:07 +0300)]
virtio_blk: Use sysfs_match_string() helper
Use sysfs_match_string() helper instead of open coded variant.
Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
Ben Skeggs [Tue, 25 Jul 2017 01:06:47 +0000 (11:06 +1000)]
drm/nouveau/bar/gf100: fix access to upper half of BAR2
Bit 30 being set causes the upper half of BAR2 to stay in physical mode,
mapped over the end of VRAM, even when the rest of the BAR has been set
to virtual mode.
We inherited our initial value from RM, but I'm not aware of any reason
we need to keep it that way.
This fixes severe GPU hang/lockup issues revealed by Wayland on F26.
Shout-out to NVIDIA for the quick response with the potential cause!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # 4.3+
We already do this for PCI mappings, and the higher level code now
expects that CPU on/offlining doesn't have an affect on the queue
mappings.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The blk-mq code lacks support for looking at the rpm_status field, tracking
active requests and the RQF_PM flag.
Due to the default switch to blk-mq for scsi people start to run into
suspend / resume issue due to this fact, so make sure we disable the runtime
PM functionality until it is properly implemented.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dave Martin [Fri, 30 Jun 2017 17:56:59 +0000 (18:56 +0100)]
ARM: 8687/1: signal: Fix unparseable iwmmxt_sigframe in uc_regspace[]
In kernels with CONFIG_IWMMXT=y running on non-iWMMXt hardware, the
signal frame can be left partially uninitialised in such a way
that userspace cannot parse uc_regspace[] safely. In particular,
this means that the VFP registers cannot be located reliably in the
signal frame when a multi_v7_defconfig kernel is run on the
majority of platforms.
The cause is that the uc_regspace[] is laid out statically based on
the kernel config, but the decision of whether to save/restore the
iWMMXt registers must be a runtime decision.
To minimise breakage of software that may assume a fixed layout,
this patch emits a dummy block of the same size as iwmmxt_sigframe,
for non-iWMMXt threads. However, the magic and size of this block
are now filled in to help parsers skip over it. A new DUMMY_MAGIC
is defined for this purpose.
It is probably legitimate (if non-portable) for userspace to
manufacture its own sigframe for sigreturn, and there is no obvious
reason why userspace should be required to insert a DUMMY_MAGIC
block when running on non-iWMMXt hardware, when omitting it has
worked just fine forever in other configurations. So in this case,
sigreturn does not require this block to be present.
Reported-by: Edmund Grimley-Evans <Edmund.Grimley-Evans@arm.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Dave Airlie [Mon, 24 Jul 2017 05:38:53 +0000 (15:38 +1000)]
Merge branch 'linux-4.13' of git://github.com/skeggsb/linux into drm-fixes
nouveau regression fixes.
* 'linux-4.13' of git://github.com/skeggsb/linux:
drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspend
drm/nouveau/kms/nv50: update vblank state in response to modeset actions
drm/nouveau/disp: add tv encoders to output resource mapping
drm/nouveau/i2c/gf119-: add support for address-only transactions
Ben Skeggs [Tue, 18 Jul 2017 22:47:07 +0000 (08:47 +1000)]
drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspend
These on()/off() calls should be done as a result of modesetting actions,
and as we shut down all heads already on unload/suspend, it's pointless
to call off() again.
Ben Skeggs [Wed, 19 Jul 2017 06:49:59 +0000 (16:49 +1000)]
drm/nouveau/i2c/gf119-: add support for address-only transactions
Since switching the I2C-over-AUX helpers, there have been regressions on
some display combinations due to us not having support for "address only"
transactions.
This commits enables support for them for GF119 and newer.
Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm.
A bug that I had fixed earlier just came back, with CONFIG_EXTCON=m,
the rockchip drm driver will fail to link:
drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_get_port_lanes':
cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x30): undefined reference to `extcon_get_state'
cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x6c): undefined reference to `extcon_get_property'
drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_check_sink_connection':
cdn-dp-core.c:(.text.cdn_dp_check_sink_connection+0x80): undefined reference to `extcon_get_state'
drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_enable':
cdn-dp-core.c:(.text.cdn_dp_enable+0x748): undefined reference to `extcon_get_property'
The problem is that that the sub-drivers are now all linked into the
main rockchip drm module, which breaks all the Kconfig dependencies
that are specified in the options for those sub-drivers.
This clarifies the dependency to ensure that we can only turn on the DP
driver when EXTCON is reachable. As the 'select' statements can now
cause additional options to become built-in when they should be
loadable modules, I'm moving those into the main driver config option.
The dependency on DRM_ROCKCHIP can be reduced into a single 'if'
statement here for brevity, but this has no functional effect.
This adds a perl script to actually parse the MAINTAINERS file, clean up
some whitespace in it, warn about errors in it, and then properly sort
the end result.
My perl-fu is atrocious, so the script has basically been created by
randomly putting various characters in a pile, mixing them around, and
then looking it the end result does anything interesting when used as a
perl script.
Prepping for scripting the MAINTAINERS file cleanup (and possible split)
showed a couple of cases where the headers for a couple of entries were
bogus.
There's a few different kinds of bogosities:
- the X-GENE SOC EDAC case was confused and split over two lines
- there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all
different things.
- the NOKIA N900 CAMERA SUPPORT" was duplicated
all of which were more obvious when you started doing associative arrays
in perl to track these things by the header (so that we can alphabetize
this thing properly, and so that we might split it up by the data too).
Cc: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.
parisc: Merge millicode routines via linker script
When compiling the 4.13-rc kernel I got those linker errors:
libgcc2.c:(.text+0x110): relocation truncated to fit: R_PARISC_PCREL22F against symbol `$$divU'
defined in .text.div section in /usr/lib/gcc/hppa64-linux-gnu/4.9.2/libgcc.a(_divU.o)
hppa64-linux-gnu-ld: /usr/lib/gcc/hppa64-linux-gnu/4.9.2/libgcc.a(_moddi3.o)(.text+0x174): cannot reach $$divU
Avoid such errors by bundling the millicode routines in the linker script.
Merge tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some fixes and cleanups for running under Xen"
* tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: don't online new memory initially
xen/x86: fix cpu hotplug
xen/grant-table: log the lack of grants
xen/x86: Don't BUG on CPU0 offlining
When setting up the Xenstore watch for the memory target size the new
watch will fire at once. Don't try to reach the configured target size
by onlining new memory in this case, as the current memory size will
be smaller in almost all cases due to e.g. BIOS reserved pages.
Onlining new memory will lead to more problems e.g. undesired conflicts
with NVMe devices meant to be operated as block devices.
Instead remember the difference between target size and current size
when the watch fires for the first time and apply it to any further
size changes, too.
In order to avoid races between balloon.c and xen-balloon.c init calls
do the xen-balloon.c initialization from balloon.c.
Commit dc6416f1d711eb4c1726e845d653235dcaae12e1 ("xen/x86: Call
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()")
introduced an error leading to a stack overflow of the idle task when
a cpu was brought offline/online many times: by calling
cpu_startup_entry() instead of returning at the end of xen_play_dead()
do_idle() would be entered again and again.
Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing
to return from xen_play_dead().
projects / karo-tx-linux.git / log