X-Git-Url: https://git.karo-electronics.de/?p=karo-tx-redboot.git;a=blobdiff_plain;f=ReleaseNotes.txt;h=8a7381f33fcb4c0fe8fde6492672166004e7f78b;hp=8009f17869a9a7bc458b65911cda14248ca424dd;hb=HEAD;hpb=730cf9639362fd35b337c1657fa26454fa9827bc

diff --git a/ReleaseNotes.txt b/ReleaseNotes.txt
index 8009f178..8a7381f3 100755
--- a/ReleaseNotes.txt
+++ b/ReleaseNotes.txt
@@ -1,7 +1,62 @@
   RedBoot for Starter-Kit V (STK5)
   Ka-Ro Electronics GmbH
 
+  The RedBoot source code is available via git from:
+  git://git.karo-electronics.de/karo-tx-redboot.git
+  in the 'master' branch
+
   ===========================================================
+ v1.5.11 (2015-02-23)
+  git tag: KARO-TX53-2015-02-23
+  Changes:
+      - add support for more NAND flash chips:
+        Micron 29F1G08ABAEA
+	Toshiba TC58BVG0S3HTAI0
+	Macronix MX30LF1G08AA
+
+ v1.5.10 (2014-11-14)
+  git tag: KARO-TX53-2014-11-14
+  Changes:
+    TX53:
+      - silence error message for i.MX53 mask revision 4
+        (refer to TX53-PCN-2014-11.pdf)
+
+ v1.5.9 (2014-08-15)
+  git tag: KARO-TX53-2014-08-15
+  Changes:
+    TX53:
+      - change pad settings for DDR control lines, to prevent memory
+        errors at high temperatures
+
+ v1.5.8 (2014-08-08)
+  git tag: KARO-TX51-2014-08-08
+  Changes:
+    TX51:
+      - explicitly program the padctl settings for SDRAM and NAND from
+        the DCD to ensure correct settings after soft reset.
+      - reduce DSE values for SDRAM and NAND control lines for better
+        error margins in NAND detection and SDRAM stress test.
+      - Revert the change of the NFC clock frequency from the previous
+        release, as this is not necessary any more with the improved
+        pad settings.
+
+ v1.5.7 (2014-07-01)
+  git tag: KARO-TX53-2014-04-09
+  Changes:
+    TX51:
+      - reduce the NFC clock frequency to 16MHz to prevent NAND chip
+        detection errors at cold temperatures with the Toshiba
+        TC58NYG0S3EBAI4 flash chips
+    TX53:
+      - adjust core voltage according to selected frequency upon boot
+      - remove bogus DDR3 Write leveling calibration that is not
+        required due to the PCB layout and does not work with the
+        NT5CB128M16FP-DII chips
+
+    TX27:
+      - committed the missing source code changes for v1.5.5 that were
+        only committed to the legacy CVS repository but missing in git.
+
  v1.5.6 (2013-08-19)
   Changes:
     TX53:
@@ -31,7 +86,7 @@
       - fixed ATAG_MEM construction for banked memory
       - fixed MMU mappings
 
- v1.5.2 (2011-12-23)
+ v1.5.2 (2011-11-28)
   Changes:
     TX51:
       - add support for Toshiba NAND flash