the mouse interrupt subroutine, so it must be efficient.
NOTE: Interrupts MUST be OFF while this routine is called to ensure we have
- mutually exclusive access to our internal data structures for
- interrupt driven systems (like under DOS).
+ mutually exclusive access to our internal data structures for
+ interrupt driven systems (like under DOS).
****************************************************************************/
static void addMouseEvent(
uint what,
event_t evt;
if (EVT.count < EVENTQSIZE) {
- /* Save information in event record. */
- evt.when = _EVT_getTicks();
- evt.what = what;
- evt.message = message;
- evt.modifiers = but_stat;
- evt.where_x = x; /* Save mouse event position */
- evt.where_y = y;
- evt.relative_x = mickeyX;
- evt.relative_y = mickeyY;
- evt.modifiers |= EVT.keyModifiers;
- addEvent(&evt); /* Add to tail of event queue */
- }
+ /* Save information in event record. */
+ evt.when = _EVT_getTicks();
+ evt.what = what;
+ evt.message = message;
+ evt.modifiers = but_stat;
+ evt.where_x = x; /* Save mouse event position */
+ evt.where_y = y;
+ evt.relative_x = mickeyX;
+ evt.relative_y = mickeyY;
+ evt.modifiers |= EVT.keyModifiers;
+ addEvent(&evt); /* Add to tail of event queue */
+ }
}
/****************************************************************************
to the event queue.
Note: Interrupts are ON when this routine is called by the mouse driver code.
-//AM: NOTE: This function has not actually been ported from DOS yet and should not
-//AM: be installed until it is.
+/*AM: NOTE: This function has not actually been ported from DOS yet and should not */
+/*AM: be installed until it is. */
****************************************************************************/
static void EVTAPI mouseISR(
uint mask,
uint ps;
if (mask & 1) {
- /* Save the current mouse coordinates */
- EVT.mx = x; EVT.my = y;
-
- /* If the last event was a movement event, then modify the last
- * event rather than post a new one, so that the queue will not
- * become saturated. Before we modify the data structures, we
- * MUST ensure that interrupts are off.
- */
- ps = _EVT_disableInt();
- if (EVT.oldMove != -1) {
- EVT.evtq[EVT.oldMove].where_x = x; /* Modify existing one */
- EVT.evtq[EVT.oldMove].where_y = y;
- EVT.evtq[EVT.oldMove].relative_x += mickeyX;
- EVT.evtq[EVT.oldMove].relative_y += mickeyY;
- }
- else {
- EVT.oldMove = EVT.freeHead; /* Save id of this move event */
- addMouseEvent(EVT_MOUSEMOVE,0,x,y,mickeyX,mickeyY,butstate);
- }
- _EVT_restoreInt(ps);
- }
+ /* Save the current mouse coordinates */
+ EVT.mx = x; EVT.my = y;
+
+ /* If the last event was a movement event, then modify the last
+ * event rather than post a new one, so that the queue will not
+ * become saturated. Before we modify the data structures, we
+ * MUST ensure that interrupts are off.
+ */
+ ps = _EVT_disableInt();
+ if (EVT.oldMove != -1) {
+ EVT.evtq[EVT.oldMove].where_x = x; /* Modify existing one */
+ EVT.evtq[EVT.oldMove].where_y = y;
+ EVT.evtq[EVT.oldMove].relative_x += mickeyX;
+ EVT.evtq[EVT.oldMove].relative_y += mickeyY;
+ }
+ else {
+ EVT.oldMove = EVT.freeHead; /* Save id of this move event */
+ addMouseEvent(EVT_MOUSEMOVE,0,x,y,mickeyX,mickeyY,butstate);
+ }
+ _EVT_restoreInt(ps);
+ }
if (mask & 0x2A) {
- ps = _EVT_disableInt();
- addMouseEvent(EVT_MOUSEDOWN,mask >> 1,x,y,0,0,butstate);
- EVT.oldMove = -1;
- _EVT_restoreInt(ps);
- }
+ ps = _EVT_disableInt();
+ addMouseEvent(EVT_MOUSEDOWN,mask >> 1,x,y,0,0,butstate);
+ EVT.oldMove = -1;
+ _EVT_restoreInt(ps);
+ }
if (mask & 0x54) {
- ps = _EVT_disableInt();
- addMouseEvent(EVT_MOUSEUP,mask >> 2,x,y,0,0,butstate);
- EVT.oldMove = -1;
- _EVT_restoreInt(ps);
- }
+ ps = _EVT_disableInt();
+ addMouseEvent(EVT_MOUSEUP,mask >> 2,x,y,0,0,butstate);
+ EVT.oldMove = -1;
+ _EVT_restoreInt(ps);
+ }
EVT.oldKey = -1;
}
Keyboard interrupt handler function.
NOTE: Interrupts are OFF when this routine is called by the keyboard ISR,
- and we leave them OFF the entire time. This has been modified to work
+ and we leave them OFF the entire time. This has been modified to work
in conjunction with smx keyboard handler.
****************************************************************************/
static void EVTAPI keyboardISR(void)
PM_lockHandle lh;
if (_EVT_useEvents) {
- /* Initialise the event queue and enable our interrupt handlers */
- initEventQueue();
- PM_setKeyHandler(keyboardISR);
- if ((haveMouse = detectMouse()) != 0)
- PM_setMouseHandler(0xFFFF,mouseISR);
-
- /* Read the keyboard modifier flags from the BIOS to get the
- * correct initialisation state. The only state we care about is
- * the correct toggle state flags such as SCROLLLOCK, NUMLOCK and
- * CAPSLOCK.
- */
- EVT.keyModifiers = 0;
- mods = PM_getByte(_EVT_biosPtr+0x17);
- if (mods & 0x10)
- EVT.keyModifiers |= EVT_SCROLLLOCK;
- if (mods & 0x20)
- EVT.keyModifiers |= EVT_NUMLOCK;
- if (mods & 0x40)
- EVT.keyModifiers |= EVT_CAPSLOCK;
-
- /* Lock all of the code and data used by our protected mode interrupt
- * handling routines, so that it will continue to work correctly
- * under real mode.
- */
- if (!locked) {
- /* It is difficult to ensure that we lock our global data, so we
- * do this by taking the address of a variable locking all data
- * 2Kb on either side. This should properly cover the global data
- * used by the module (the other alternative is to declare the
- * variables in assembler, in which case we know it will be
- * correct).
- */
- stat = !PM_lockDataPages(&EVT,sizeof(EVT),&lh);
- stat |= !PM_lockDataPages(&_EVT_biosPtr,sizeof(_EVT_biosPtr),&lh);
- stat |= !PM_lockCodePages((__codePtr)_EVT_cCodeStart,(int)_EVT_cCodeEnd-(int)_EVT_cCodeStart,&lh);
- stat |= !PM_lockCodePages((__codePtr)_EVT_codeStart,(int)_EVT_codeEnd-(int)_EVT_codeStart,&lh);
- if (stat) {
- PM_fatalError("Page locking services failed - interrupt handling not safe!");
- exit(1);
- }
- locked = 1;
- }
-
- _EVT_installed = true;
- }
+ /* Initialise the event queue and enable our interrupt handlers */
+ initEventQueue();
+ PM_setKeyHandler(keyboardISR);
+ if ((haveMouse = detectMouse()) != 0)
+ PM_setMouseHandler(0xFFFF,mouseISR);
+
+ /* Read the keyboard modifier flags from the BIOS to get the
+ * correct initialisation state. The only state we care about is
+ * the correct toggle state flags such as SCROLLLOCK, NUMLOCK and
+ * CAPSLOCK.
+ */
+ EVT.keyModifiers = 0;
+ mods = PM_getByte(_EVT_biosPtr+0x17);
+ if (mods & 0x10)
+ EVT.keyModifiers |= EVT_SCROLLLOCK;
+ if (mods & 0x20)
+ EVT.keyModifiers |= EVT_NUMLOCK;
+ if (mods & 0x40)
+ EVT.keyModifiers |= EVT_CAPSLOCK;
+
+ /* Lock all of the code and data used by our protected mode interrupt
+ * handling routines, so that it will continue to work correctly
+ * under real mode.
+ */
+ if (!locked) {
+ /* It is difficult to ensure that we lock our global data, so we
+ * do this by taking the address of a variable locking all data
+ * 2Kb on either side. This should properly cover the global data
+ * used by the module (the other alternative is to declare the
+ * variables in assembler, in which case we know it will be
+ * correct).
+ */
+ stat = !PM_lockDataPages(&EVT,sizeof(EVT),&lh);
+ stat |= !PM_lockDataPages(&_EVT_biosPtr,sizeof(_EVT_biosPtr),&lh);
+ stat |= !PM_lockCodePages((__codePtr)_EVT_cCodeStart,(int)_EVT_cCodeEnd-(int)_EVT_cCodeStart,&lh);
+ stat |= !PM_lockCodePages((__codePtr)_EVT_codeStart,(int)_EVT_codeEnd-(int)_EVT_codeStart,&lh);
+ if (stat) {
+ PM_fatalError("Page locking services failed - interrupt handling not safe!");
+ exit(1);
+ }
+ locked = 1;
+ }
+
+ _EVT_installed = true;
+ }
}
/****************************************************************************
int yRes)
{
if (haveMouse) {
- ps2MouseStop();
- ps2MouseStart( 0, xRes, 0, yRes, -1, -1, -1);
- }
+ ps2MouseStop();
+ ps2MouseStart( 0, xRes, 0, yRes, -1, -1, -1);
+ }
}
/****************************************************************************
int *y)
{
if (haveMouse)
- ps2MouseMove(*x, *y);
+ ps2MouseMove(*x, *y);
}
/****************************************************************************
uchar mods;
if (_EVT_installed) {
- PM_restoreKeyHandler();
+ PM_restoreKeyHandler();
if (haveMouse)
- PM_restoreMouseHandler();
-
- /* Set the keyboard modifier flags in the BIOS to our values */
- EVT_allowLEDS(true);
- mods = PM_getByte(_EVT_biosPtr+0x17) & ~0x70;
- if (EVT.keyModifiers & EVT_SCROLLLOCK)
- mods |= 0x10;
- if (EVT.keyModifiers & EVT_NUMLOCK)
- mods |= 0x20;
- if (EVT.keyModifiers & EVT_CAPSLOCK)
- mods |= 0x40;
- PM_setByte(_EVT_biosPtr+0x17,mods);
-
- /* Flag that we are no longer installed */
- _EVT_installed = false;
- }
+ PM_restoreMouseHandler();
+
+ /* Set the keyboard modifier flags in the BIOS to our values */
+ EVT_allowLEDS(true);
+ mods = PM_getByte(_EVT_biosPtr+0x17) & ~0x70;
+ if (EVT.keyModifiers & EVT_SCROLLLOCK)
+ mods |= 0x10;
+ if (EVT.keyModifiers & EVT_NUMLOCK)
+ mods |= 0x20;
+ if (EVT.keyModifiers & EVT_CAPSLOCK)
+ mods |= 0x40;
+ PM_setByte(_EVT_biosPtr+0x17,mods);
+
+ /* Flag that we are no longer installed */
+ _EVT_installed = false;
+ }
}
/****************************************************************************
projects / karo-tx-uboot.git / blobdiff