]> git.karo-electronics.de Git - karo-tx-uboot.git/blobdiff - board/cm-bf537e/gpio_cfi_flash.c
karo: fdt: fix panel-dpi support
[karo-tx-uboot.git] / board / cm-bf537e / gpio_cfi_flash.c
index a9e69cfe418e75c1ef6ce5f7f7597a14fe121110..1075cc41127dabd31f54964a8ca095068a06b1d9 100644 (file)
@@ -1,37 +1,50 @@
 /*
  * gpio_cfi_flash.c - GPIO-assisted Flash Chip Support
  *
- * Copyright (c) 2009 Analog Devices Inc.
+ * Copyright (c) 2009-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
 
 #include <common.h>
 #include <asm/blackfin.h>
+#include <asm/gpio.h>
 #include <asm/io.h>
 #include "gpio_cfi_flash.h"
 
-#define GPIO_PIN_1  PF4
+/* Allow this driver to be shared among boards */
+#ifndef GPIO_PIN_1
+#define GPIO_PIN_1  GPIO_PF4
+#endif
 #define GPIO_MASK_1 (1 << 21)
-#define GPIO_MASK   (GPIO_MASK_1)
+#ifndef GPIO_PIN_2
+#define GPIO_MASK_2 (0)
+#else
+#define GPIO_MASK_2 (1 << 22)
+#endif
+#ifndef GPIO_PIN_3
+#define GPIO_MASK_3 (0)
+#else
+#define GPIO_MASK_3 (1 << 23)
+#endif
+#define GPIO_MASK   (GPIO_MASK_1 | GPIO_MASK_2 | GPIO_MASK_3)
 
 void *gpio_cfi_flash_swizzle(void *vaddr)
 {
        unsigned long addr = (unsigned long)vaddr;
 
-       if (addr & GPIO_MASK_1)
-               bfin_write_PORTFIO_SET(GPIO_PIN_1);
-       else
-               bfin_write_PORTFIO_CLEAR(GPIO_PIN_1);
+       gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1);
 
-#ifdef GPIO_MASK_2
-       if (addr & GPIO_MASK_2)
-               bfin_write_PORTGIO_SET(GPIO_PIN_2);
-       else
-               bfin_write_PORTGIO_CLEAR(GPIO_PIN_2);
+#ifdef GPIO_PIN_2
+       gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2);
+#endif
+
+#ifdef GPIO_PIN_3
+       gpio_set_value(GPIO_PIN_3, addr & GPIO_MASK_3);
 #endif
 
        SSYNC();
+       udelay(1);
 
        return (void *)(addr & ~GPIO_MASK);
 }
@@ -55,6 +68,14 @@ MAKE_FLASH(64, q) /* flash_write64() flash_read64() */
 
 void gpio_cfi_flash_init(void)
 {
-       bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() | GPIO_PIN_1);
-       gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE);
+       gpio_request(GPIO_PIN_1, "gpio_cfi_flash");
+       gpio_direction_output(GPIO_PIN_1, 0);
+#ifdef GPIO_PIN_2
+       gpio_request(GPIO_PIN_2, "gpio_cfi_flash");
+       gpio_direction_output(GPIO_PIN_2, 0);
+#endif
+#ifdef GPIO_PIN_3
+       gpio_request(GPIO_PIN_3, "gpio_cfi_flash");
+       gpio_direction_output(GPIO_PIN_3, 0);
+#endif
 }