karo: tx6ul: enable soft i2c driver and 'i2c' command

[karo-tx-uboot.git] / board / karo / tx6 / Kconfig

diff --git a/board/karo/tx6/Kconfig b/board/karo/tx6/Kconfig
index c61f91afec699d3cbe47c68dded88367bc1db3c6..11218913477c22ad2ea1a61c3e5449d055e4b4d1 100644 (file)
--- a/board/karo/tx6/Kconfig
+++ b/board/karo/tx6/Kconfig
@@ -1,27 +1,5 @@
 if TARGET_TX6
 
-config MX6
-       bool
-       default y
-
-config MX6Q
-       bool
-
-config MX6DL
-       bool
-
-config MX6QDL
-       bool
-
-config MX6S
-       bool
-
-config MX6SL
-       bool
-
-config MX6SX
-       bool
-
 config SYS_BOARD
        default "tx6"
 
@@ -34,46 +12,55 @@ config SYS_SOC
 config SYS_CONFIG_NAME
        default "tx6"
 
-config CMD_ROMUPDATE
-       bool
-
 config TX6
        bool
        default y
-       select MX6
-       select CMD_BMP if LCD
-       select CMD_BOOTCE
-       select CMD_BOOTZ
-       select CMD_CACHE
-       select CMD_I2C if I2C
-       select CMD_MEMTEST
-       select CMD_TIME
+       select APBH_DMA
+       select APBH_DMA_BURST
+       select APBH_DMA_BURST8
+       select CC_OPTIMIZE_LIBS_FOR_SPEED
        select DM
        select DM_GPIO
-       select SYS_I2C
-       select SYS_I2C_MXC
-       select GET_FEC_MAC_ADDR_FROM_IIM
+       select DM_THERMAL
+       select FSL_ESDHC if MMC
+       select FSL_USDHC if MMC
+       select IMX6_THERMAL
+       select LIB_RAND
+       select PHYLIB
+       select GET_FEC_MAC_ADDR_FROM_IIM if FEC_MXC
+       select MXC_OCOTP if CMD_FUSE
+       select OF_BOARD_SETUP
+       select OF_LIBFDT
 
 config TX6_NAND
        bool
        default ! TX6_EMMC
-       select CMD_NAND
-       select CMD_NAND_TRIMFFS
-       select CMD_MTDPARTS
+       select CMD_NAND_TRIMFFS if CMD_NAND
        select CMD_ROMUPDATE
-       select FDT_FIXUP_PARTITIONS if OF_LIBFDT
-       select MTD_PARTITIONS
-       select NAND_MXS_NO_BBM_SWAP if NAND_MXS
-       select SYS_NAND_USE_FLASH_BBT if NAND_MXS
-       select APBH_DMA
-       select APBH_DMA_BURST
-       select APBH_DMA_BURST8
+       select FDT_FIXUP_PARTITIONS
        select MTD_DEVICE
+       select MTD_PARTITIONS
+       select NAND
+       select NAND_MXS
+       select NAND_MXS_NO_BBM_SWAP
+       select SYS_NAND_USE_FLASH_BBT
 
 config TX6_EMMC
        bool
+       select CMD_MMC
+       select MMC
        select SUPPORT_EMMC_BOOT
 
+config TX6UL
+       bool
+       select SOC_MX6UL
+       select SYS_I2C
+       select SYS_I2C_SOFT
+       select SYS_SDRAM_BUS_WIDTH_16
+
+config TX6QP
+       bool
+
 #
 # variables selected depending on module variant
 #
@@ -86,68 +73,67 @@ config SYS_SDRAM_BUS_WIDTH_16
 config SYS_SDRAM_BUS_WIDTH_32
        bool
 
+config SYS_SDRAM_CHIP_SIZE
+       int "SDRAM chip size in MiB"
 
 choice
        prompt "TX6 module variant"
 
-config TARGET_TX6Q_10X0
-       bool "TX6Q-1010 and TX6Q-1030"
-       select MX6Q
+config TARGET_TX6Q_NAND
+       bool "TX6Q modules with NAND flash (TX6Q-1030/TX6Q-1130)"
+       select SOC_MX6Q
+       select SYS_I2C
+       select SYS_I2C_MXC
 
-config TARGET_TX6Q_1020
-       bool "TX6Q-1020"
-       select MX6Q
+config TARGET_TX6Q_EMMC
+       bool "TX6Q modules with eMMC (TX6Q-1020/TX6Q-1036)"
+       select SOC_MX6Q
+       select SYS_I2C
+       select SYS_I2C_MXC
        select TX6_EMMC
-       select TX6_REV_2
-
-config TARGET_TX6Q_11X0
-       bool "TX6Q-1110 and TX6Q-1130"
-       select MX6Q
-       select SYS_LVDS_IF
-       
-config TARGET_TX6S_8034
-       bool "TX6S-8034"
-       select MX6S
-       select SYS_SDRAM_BUS_WIDTH_16
 
-config TARGET_TX6S_8035
-       bool "TX6S-8035"
-       select MX6S
+config TARGET_TX6S_NAND
+       bool "TX6S modules with NAND flash (TX6S-8034/TX6S-8134)"
+       select SOC_MX6S
+       select SYS_I2C
+       select SYS_I2C_MXC
+
+config TARGET_TX6S_EMMC
+       bool "TX6S modules with eMMC (TX6S-8035/TX6S-8135)"
+       select SOC_MX6S
+       select SYS_I2C
+       select SYS_I2C_MXC
+       select TX6_EMMC
+
+config TARGET_TX6U_NAND
+       bool "TX6U (i.MX6DL) modules with NAND flash (TX6U-8030/TX6U-8032)"
+       select SOC_MX6DL
+       select SYS_I2C
+       select SYS_I2C_MXC
+
+config TARGET_TX6U_EMMC
+       bool "TX6U (i.MX6DL) modules with eMMC (TX6U-8033/TX6U-8133)"
+       select SOC_MX6DL
+       select SYS_I2C
+       select SYS_I2C_MXC
+       select TX6_EMMC
+
+config TARGET_TX6UL_NAND
+       bool "TXUL (i.MX6UL) modules with NAND flash (TXUL-5010)"
+       select TX6UL
+
+config TARGET_TX6UL_EMMC
+       bool "TXUL (i.MX6UL) modules with eMMC (TXUL-5011)"
+       select TX6UL
        select TX6_EMMC
-       select SYS_SDRAM_BUS_WIDTH_32
-
-config TARGET_TX6U_8010
-       bool "TX6U-8010 and TX6U-8030"
-       select MX6DL
-
-config TARGET_TX6U_8011
-       bool "TX6U-8011"
-       select MX6DL
-       select SYS_SDRAM_BUS_WIDTH_32
-       select TX6_REV_1
-
-config TARGET_TX6U_8012
-       bool "TX6U-8012"
-       select MX6DL
-       select TX6_REV_1
-
-config TARGET_TX6U_81X0
-       bool "TX6U-8110 and TX6U-8130"
-       select MX6DL
-       select SYS_LVDS_IF
-
-config TARGET_TX6U_8111
-       bool "TX6U-8111"
-       select MX6DL
-       select SYS_SDRAM_BUS_WIDTH_32
-       select SYS_LVDS_IF
-       select TX6_REV_1
-
-config TARGET_TX6U_8033
-       bool "TX6U-8033"
-       select MX6DL
+
+config TARGET_TX6QP_EMMC
+       bool "TX6Q modules with i.MX6Q+ and eMMC (TX6QP-8037)"
+       select SOC_MX6Q
+       select SYS_I2C
+       select SYS_I2C_MXC
        select TX6_EMMC
-       select TX6_REV_3
+       select TX6QP
 
 endchoice
 
@@ -163,6 +149,7 @@ config TX6_UBOOT_MFG
 
 config TX6_UBOOT_NOENV
        bool "U-Boot using only built-in environment"
+       select UBOOT_IGNORE_ENV
 
 endchoice