]> git.karo-electronics.de Git - karo-tx-uboot.git/blobdiff - board/stxgp3/flash.c
imported Freescale specific U-Boot additions for i.MX28,... release L2.6.31_10.08.01
[karo-tx-uboot.git] / board / stxgp3 / flash.c
index 032989ba5616d4c764a866d7c7043666c7e89f5f..61c960247afbaddd338cfdb4f295218906928d02 100755 (executable)
 
 #include <common.h>
 
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
 
-flash_info_t   flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips        */
+flash_info_t   flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR      (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE      CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -72,7 +72,7 @@ unsigned long flash_init (void)
        /* Init: enable write,
         * or we cannot even write flash commands
         */
-       for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
                flash_info[i].flash_id = FLASH_UNKNOWN;
 
                /* set the default sector offset */
@@ -80,7 +80,7 @@ unsigned long flash_init (void)
 
        /* Static FLASH Bank configuration here - FIXME XXX */
 
-       size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+       size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
        if (flash_info[0].flash_id == FLASH_UNKNOWN) {
                printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -88,22 +88,22 @@ unsigned long flash_init (void)
        }
 
        /* Re-do sizing to get full correct info */
-       size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+       size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
        flash_info[0].size = size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
        /* monitor protection ON by default */
        flash_protect(FLAG_PROTECT_SET,
-                     CFG_MONITOR_BASE,
-                     CFG_MONITOR_BASE+monitor_flash_len-1,
+                     CONFIG_SYS_MONITOR_BASE,
+                     CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
                      &flash_info[0]);
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
        /* ENV protection ON by default */
        flash_protect(FLAG_PROTECT_SET,
-                     CFG_ENV_ADDR,
-                     CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+                     CONFIG_ENV_ADDR,
+                     CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
                      &flash_info[0]);
 #endif
 #endif
@@ -329,7 +329,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
                                        asm("sync");
                                        return 1;
                                }
-                               if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+                               if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
                                        printf ("Timeout\n");
                                        *addr = 0xFFFFFFFF;     /* reset bank */
                                        asm("sync");
@@ -458,7 +458,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
        flag  = 0;
 
        while (((csr = *addr) & 0x00800080) != 0x00800080) {
-               if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
                        flag = 1;
                        break;
                }
@@ -502,7 +502,7 @@ static int clear_block_lock_bit(vu_long  * addr)
 
        start = get_timer (0);
        while((*addr & 0x00800080) != 0x00800080){
-               if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+               if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
                        printf ("Timeout on clearing Block Lock Bit\n");
                        *addr = 0xFFFFFFFF;     /* reset bank */
                        asm("sync");
@@ -512,4 +512,4 @@ static int clear_block_lock_bit(vu_long  * addr)
        return 0;
 }
 
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */