#include <configs/omap1510.h>
-/*
- * High Level Configuration Options
- * (easy to change)
- */
#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP1510 1 /* which is in a 5910 */
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE SZ_64M
+#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x0c000000
-#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */
/*
* FLASH organization
*/
-#define CFG_FLASH_CFI /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER /* Use the common driver */
-#define CFG_MAX_FLASH_BANKS 1
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_2 }
-#else
-#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-#endif
+#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
/* FIXME: Does not work on AMD flash */
-/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_SECT 512 /* max # of sectors on one chip */
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max # of sectors on one chip */
-#define CFG_MONITOR_BASE PHYS_FLASH_1
-#define CFG_MONITOR_LEN SZ_128K
+#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
/*
* Environment settings
*/
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CFG_ENV_IS_NOWHERE
-#define CFG_ENV_SIZE SZ_1K
-#else
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN)
-#define CFG_ENV_SIZE SZ_8K
-#define CFG_ENV_SECT_SIZE SZ_64K
-#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#define CONFIG_ENV_OVERWRITE
-#endif
-
/*
* Size of malloc() pool and stack
*/
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)
-#define CONFIG_STACKSIZE SZ_8K
-#define PHYS_SDRAM_1_RESERVED 0
-#else
-#define CFG_MALLOC_LEN SZ_4M
-#define CONFIG_STACKSIZE SZ_1M
-#define PHYS_SDRAM_1_RESERVED (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE)
-#endif
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+#define CONFIG_STACKSIZE (1 * 1024 * 1024)
+#define PHYS_SDRAM_1_RESERVED (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
/*
* Hardware drivers
#define CONFIG_DRIVER_SMC91111
#define CONFIG_SMC91111_BASE 0x08000300
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP1510_I2C
+
+#define CONFIG_RTC_DS1307
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+
/*
* NS16550 Configuration
*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE (-4)
-#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */
-#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */
+#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_LOADB | \
- CFG_CMD_IMI | \
- CFG_CMD_FLASH | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_BOOTD | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_RUN)
-#else
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_LOADB | \
- CFG_CMD_IMI | \
- CFG_CMD_FLASH | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_ENV | \
- CFG_CMD_BOOTD | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_RUN | \
- CFG_CMD_JFFS2)
-#endif
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
#define CONFIG_LOOPW
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CONFIG_BOOTDELAY 0
-#undef CONFIG_BOOTARGS /* the preboot command will set bootargs*/
-#define CFG_AUTOLOAD "n" /* no autoload */
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "setup=setenv bootargs console=ttyS0,${baudrate} " \
- "root=/dev/nfs ip=dhcp\0" \
- "update=erase c000000 c03ffff; " \
- "cp.b 10400000 c000000 ${filesize}\0"
-#else
#define CONFIG_BOOTDELAY 3
-#undef CONFIG_BOOTARGS /* boot command will set bootargs */
-#define CFG_AUTOLOAD "n" /* no autoload */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
#define CONFIG_BOOTCOMMAND "run nboot"
#define CONFIG_PREBOOT "run setup"
#define CONFIG_EXTRA_ENV_SETTINGS \
"silent=1\0" \
"ospart=0\0" \
- "swapos=no\0" \
+ "bootfile=/boot/uImage\0" \
"setpart=" \
- "if test $swapos = yes; then " \
- "if test $ospart -eq 0; then chpart 4; else chpart 3; fi; "\
- "setenv swapos no; saveenv; " \
- "else " \
- "if test $ospart -eq 0; then chpart 3; else chpart 4; fi; "\
+ "if test -n $swapos; then " \
+ "setenv swapos; saveenv; " \
+ "if test $ospart -eq 0; then setenv ospart 1; else setenv ospart 0; fi; "\
"fi\0" \
"setup=setenv bootargs console=ttyS0,$baudrate " \
"mtdparts=$mtdparts\0" \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
"nfsroot=$rootpath root=/dev/nfs\0" \
"flashargs=run setpart; setenv bootargs $bootargs " \
- "root=/dev/mtdblock$partition ro " \
+ "root=mtd:data$ospart ro " \
"rootfstype=jffs2\0" \
"initrdargs=setenv bootargs $bootargs " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs; fsload /boot/uImage; bootm\0" \
- "iboot=bootp; run initrdargs; tftp; bootm\0" \
+ "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \
+ "mboot=bootp; run initrdargs; tftp; bootm\0" \
"nboot=bootp; run nfsargs; tftp; bootm\0"
-#endif
-#ifndef VOICEBLUE_SMALL_FLASH
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
#if 1 /* feel free to disable for development */
/*
* JFFS2 partitions (mtdparts command line support)
*/
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=omapflash.0"
-#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:128k(uboot),64k(env),64k(r_env),16256k(data1),-(data2)"
+#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
-#endif /* VOICEBLUE_SMALL_FLASH */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
-#ifndef VOICEBLUE_SMALL_FLASH
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_AUTO_COMPLETE
-#endif
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "# " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START PHYS_SDRAM_1
-#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED
-/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
* This time is further subdivided by a local divisor.
*/
-#define CFG_TIMERBASE OMAP1510_TIMER1_BASE
-#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
-#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
+#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
+#define CONFIG_SYS_HZ 1000
#define OMAP5910_DPLL_DIV 1
#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \
projects / karo-tx-uboot.git / blobdiff