From: Joe Hershberger Date: Mon, 4 May 2015 19:55:14 +0000 (-0500) Subject: net: Remove all references to CONFIG_ETHADDR and friends X-Git-Tag: KARO-TX6-2015-09-18~1987 X-Git-Url: https://git.karo-electronics.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=37e8414ad8c5f8a56a1e6843d942664a30b56fa7 net: Remove all references to CONFIG_ETHADDR and friends We really don't want boards defining fixed MAC addresses in their config so we just remove the option to set it in a fixed way. If you must have a MAC address that was not provisioned, then use the random MAC address functionality. Signed-off-by: Joe Hershberger Reviewed-by: Simon Glass --- diff --git a/README b/README index 42cd55953b..c0cc17b95e 100644 --- a/README +++ b/README @@ -2220,18 +2220,6 @@ CBFS (Coreboot Filesystem) support Some PHY like Intel LXT971A need extra delay after command issued before MII status register can be read -- Ethernet address: - CONFIG_ETHADDR - CONFIG_ETH1ADDR - CONFIG_ETH2ADDR - CONFIG_ETH3ADDR - CONFIG_ETH4ADDR - CONFIG_ETH5ADDR - - Define a default value for Ethernet address to use - for the respective Ethernet interface, in case this - is not determined automatically. - - IP address: CONFIG_IPADDR @@ -2997,8 +2985,8 @@ CBFS (Coreboot Filesystem) support completely disabled. Anybody can change or delete these parameters. - Alternatively, if you #define _both_ CONFIG_ETHADDR - _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default + Alternatively, if you define _both_ an ethaddr in the + default env _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default Ethernet address is installed in the environment, which can be changed exactly ONCE by the user. [The serial# is unaffected by this, i. e. it remains diff --git a/doc/README.enetaddr b/doc/README.enetaddr index 82c9cd5fe5..50e4899787 100644 --- a/doc/README.enetaddr +++ b/doc/README.enetaddr @@ -15,7 +15,7 @@ Here are the places where MAC addresses might be stored: - board-specific location (eeprom, dedicated flash, ...) Note: only used when mandatory due to hardware design etc... - - environment ("ethaddr", "eth1addr", ...) (see CONFIG_ETHADDR) + - environment ("ethaddr", "eth1addr", ...) Note: this is the preferred way to permanently store MAC addresses - ethernet data (struct eth_device -> enetaddr) diff --git a/drivers/net/greth.c b/drivers/net/greth.c index a93b37a5d7..9bc8a8d1aa 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -653,13 +654,8 @@ int greth_initialize(bd_t * bis) } } } else { - /* HW Address not found in environment, Set default HW address */ - addr[0] = GRETH_HWADDR_0; /* MSB */ - addr[1] = GRETH_HWADDR_1; - addr[2] = GRETH_HWADDR_2; - addr[3] = GRETH_HWADDR_3; - addr[4] = GRETH_HWADDR_4; - addr[5] = GRETH_HWADDR_5; /* LSB */ + /* No ethaddr set */ + return -EINVAL; } /* set and remember MAC address */ diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c index 495c0886fa..c4dd01ec2a 100644 --- a/drivers/net/lan91c96.c +++ b/drivers/net/lan91c96.c @@ -725,12 +725,6 @@ static int smc_get_ethaddr(bd_t *bd, struct eth_device *dev) static int get_rom_mac(struct eth_device *dev, unsigned char *v_rom_mac) { -#ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */ - char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 }; - - memcpy (v_rom_mac, hw_mac_addr, 6); - return (1); -#else int i; SMC_SELECT_BANK(dev, 1); for (i=0; i<6; i++) @@ -738,7 +732,6 @@ static int get_rom_mac(struct eth_device *dev, unsigned char *v_rom_mac) v_rom_mac[i] = SMC_inb(dev, LAN91C96_IA0 + i); } return (1); -#endif } /* Structure to detect the device IDs */ diff --git a/examples/standalone/README.smc91111_eeprom b/examples/standalone/README.smc91111_eeprom index a2d52e7770..f73a8d3a58 100644 --- a/examples/standalone/README.smc91111_eeprom +++ b/examples/standalone/README.smc91111_eeprom @@ -27,29 +27,6 @@ To find out who has a MAC address, or to purchase MAC addresses, goto the IEEE, at: http://standards.ieee.org/regauth/oui/index.shtml -To change your MAC address, there can not be a MAC address predefined in -U-Boot. To ensure that this does not occur, check your -include/configs/.h file, and check to see that the following -settings are _not_ or commented out there. - -#define HARDCODE_MAC 1 -#define CONFIG_ETHADDR 02:80:ad:20:31:b8 - -The purpose of HARDCODE_MAC is to hardcode the MAC address in software, -(not what we want), or to preset it to 02:80:ad:20:31:b8 (not what we -want either). - -You can check this in a running U-Boot, by doing a power cycle, then -before U-Boot tries to do any networking, running the 'printenv' command - - BOOT> printenv - - ethaddr=02:80:ad:20:31:b8 - -If you see the 'ethaddr' variable show up, like the above, you need to -recompile U-Boot, with the above settings commented out of the -include/configs/.h file. - 2. Running the smc91111_eeprom program --------------------------------------------------------------------- diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 7eac03baaf..d0f4d758b7 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -74,12 +74,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* CONFIG_MCFFEC */ #define CONFIG_HOSTNAME M5208EVBe diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 4bba81544f..a76632494c 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -95,12 +95,10 @@ #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_BOOTFILE "u-boot.bin" #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M5235EVB diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 159d2f8ced..9946108c12 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -94,12 +94,10 @@ #endif #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* CONFIG_MCFFEC */ #define CONFIG_HOSTNAME M5272C3 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index bc740ae905..4d3390b1f0 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -80,12 +80,10 @@ #define CONFIG_BOOTDELAY 5 #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* CONFIG_MCFFEC */ #define CONFIG_HOSTNAME M5282EVB diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 0829708412..e2dd8e5555 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -94,13 +94,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M53017 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index a42b5f6b47..5a7597c239 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -88,12 +88,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M5329EVB diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index c142dfbe23..7550c571b8 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -88,12 +88,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M5373EVB diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 3a6e9811d5..25b3cdac42 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -113,15 +113,12 @@ "::eth0:off:rw console=ttyS0,115200" #endif -#define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 #define CONFIG_ETHPRIME "FEC0" #define CONFIG_IPADDR 192.168.1.2 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_OVERWRITE_ETHADDR_ONCE #define CONFIG_SYS_FEC_BUF_USE_SRAM /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ #ifndef CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 1b3598a092..f3cade380e 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -77,13 +77,11 @@ # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 2288bff56d..b708001251 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -83,14 +83,11 @@ # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 91d6a1ada9..658c170c92 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -75,13 +75,10 @@ # endif # endif /* CONFIG_SYS_DISCOVER_PHY */ -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif @@ -135,12 +132,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M547xEVB diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index ce9f3b01b2..efb64a14ce 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -75,13 +75,10 @@ # endif # endif /* CONFIG_SYS_DISCOVER_PHY */ -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index dc09b1f870..d41eeb59b6 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -720,13 +720,9 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD #endif #define CONFIG_IPADDR 192.168.1.254 diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 37c2b9415a..b388168a11 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -12,7 +12,7 @@ * Please refer to doc/README.mpc85xx for more info. * * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + * search for CONFIG_SERVERIP, etc in this file. */ #ifndef __CONFIG_H @@ -406,11 +406,8 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 5d229a0d20..609c5bb3be 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -418,11 +418,8 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index dade6d3b89..479589e385 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -449,9 +449,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD #endif #define CONFIG_IPADDR 192.168.1.251 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 190c668303..fb28512340 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -539,17 +539,11 @@ extern unsigned long get_clock_freq(void); /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 5263ffcc8d..48b55b59e3 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -412,15 +412,10 @@ extern unsigned long get_clock_freq(void); /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index ac78d481d6..92f0b7fe30 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -12,7 +12,7 @@ * Please refer to doc/README.mpc85xx for more info. * * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + * search for CONFIG_SERVERIP, etc. in this file. */ #ifndef __CONFIG_H @@ -443,17 +443,11 @@ /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 02a5acf38e..57fc37b9bc 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -438,13 +438,9 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 5e7bc49dcf..7b3ddbadf2 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -658,17 +658,11 @@ /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD #endif #define CONFIG_IPADDR 192.168.1.254 diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index e6d570a6af..cae133bf58 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -300,7 +300,6 @@ #define CONFIG_ULI526X #ifdef CONFIG_ULI526X -#define CONFIG_ETHADDR 00:E0:0C:00:00:01 #endif /************************************************************ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9f755e50fc..938874fe42 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -10,7 +10,7 @@ * MPC8641HPCN board configuration file * * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + * search for CONFIG_SERVERIP, etc. in this file. */ #ifndef __CONFIG_H @@ -679,14 +679,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Environment Configuration */ -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 00:E0:0C:00:00:01 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD -#endif - #define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 3c6765560e..00589b7e68 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -165,7 +165,6 @@ "setenv bootargs ${bootargs} no_ethaddr;" \ "fi\0" \ "hostname=CPUP0\0" \ - "ethaddr=00:00:00:00:00:00\0" \ "netdev=eth0\0" \ "bootcmd=run bootcmd_nor\0" \ "" diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 2e0e9224cf..0d9fe57ba9 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -73,8 +73,6 @@ #define CONFIG_GATEWAYIP 192.168.233.1 #define CONFIG_SERVERIP 192.168.233.53 #define CONFIG_ROOTPATH "/romfs/brettl2" -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND #endif diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 50e85ca93c..dcd19e4db8 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -87,8 +87,6 @@ #endif #define CONFIG_HOSTNAME bf518f-ezbrd #define CONFIG_PHY_ADDR 3 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 7fc882a133..ad5fa53160 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -85,8 +85,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME bf526-ezbrd -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 79e440a0be..b23a250e0a 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -83,8 +83,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME bf527-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index 0fda967ac2..1b7290e8d7 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -75,8 +75,6 @@ SSYNC(); \ } while (0) #define CONFIG_HOSTNAME bf533-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index ae4d83a8f1..322705decb 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -68,8 +68,6 @@ SSYNC(); \ } while (0) #define CONFIG_HOSTNAME bf533-stamp -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ /* I2C */ diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 6df89af402..6092f243b9 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -86,8 +86,6 @@ #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_ROOTPATH "/romfs" -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */ #define CONFIG_LIB_RAND diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 4f2b2cbf29..e853b7dd73 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -65,8 +65,6 @@ #define CONFIG_RMII #endif #define CONFIG_HOSTNAME bf537-pnav -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:24:21:18 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index d01d88f3b4..ba2ea2a27a 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -86,8 +86,6 @@ #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_ROOTPATH "/romfs" -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 7b5a5a7f71..41f1b1f071 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -65,8 +65,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME bf537-stamp -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index e60558e1b6..3c82bf2701 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -63,8 +63,6 @@ #define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20310300 #define CONFIG_HOSTNAME bf538f-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index e71e6d324c..53f655890f 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -73,8 +73,6 @@ #define CONFIG_SMC911X_BASE 0x24000000 #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME bf548-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 6871d8c422..03f3cec9db 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -92,9 +92,6 @@ #define CONFIG_HOSTNAME bf561-acvilon -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - /* * Flash Settings diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index fb6f94873a..efbc6c21d9 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -64,8 +64,6 @@ #define CONFIG_SMC91111_BASE 0x2C010300 #define CONFIG_SMC_USE_32_BIT 1 #define CONFIG_HOSTNAME bf561-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 7de425349f..28bc653442 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -76,9 +76,6 @@ #define CONFIG_HOSTNAME blackstamp #define CONFIG_ROOTPATH "/checkout/uClinux-dist/romfs" #define CONFIG_SYS_AUTOLOAD "no" - -/* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ #endif #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index 6e5774c6ba..27dccf65c4 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -85,9 +85,6 @@ #define CFG_AUTOLOAD "no" #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#define CONFIG_ENV_OVERWRITE 1 /* enable changing MAC at runtime */ -/* Comment out hardcoded MAC to enable MAC storage in EEPROM */ -/* # define CONFIG_ETHADDR ff:ee:dd:cc:bb:aa */ /* * SDRAM settings & memory map diff --git a/include/configs/br4.h b/include/configs/br4.h index 48cf184826..a44c18c66e 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -69,9 +69,6 @@ #endif #define CONFIG_HOSTNAME br4 #define CONFIG_TFTP_BLOCKSIZE 4404 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 5c:38:1a:80:a7:00 */ - /* * Flash Settings diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 643c8379aa..387f1cb767 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -83,8 +83,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME cm-bf527 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index 485f01a01c..a4647858dd 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -66,8 +66,6 @@ #define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20200300 #define CONFIG_HOSTNAME cm-bf533 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index e05956846c..95afd51217 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -71,8 +71,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME cm-bf537e -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 1f26457a95..4df4a05c7d 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -69,8 +69,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME cm-bf537u -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 72eafc5699..cde23ada40 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -76,8 +76,6 @@ #define CONFIG_SMC911X_BASE 0x24000000 #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME cm-bf548 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:24:31:91 */ /* diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 96910a7afd..9d8a2c613f 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -67,8 +67,6 @@ #define CONFIG_SMC911X_BASE 0x24008000 /* AMS1 */ #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME cm-bf561 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */ /* diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 38fcc40d9f..11dd4d712b 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -177,7 +177,6 @@ considered during boot */ /* User network settings */ -#define CONFIG_ETHADDR 00:00:00:00:00:09 /* default ethernet MAC addr. */ #define CONFIG_IPADDR 192.168.100.2 /* default board IP address */ #define CONFIG_SERVERIP 192.168.100.1 /* default tftp server IP address */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index e32701f17d..019a837d07 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -32,8 +32,6 @@ #endif #endif -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ - #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 1e616730eb..063dbca03a 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -240,7 +240,6 @@ "rootpath=/opt/eldk/arm\0" \ "splashpos=230,180\0" \ "testrfspath=/opt/eldk/test_arm\0" \ - "tempmac=setenv ethaddr 02:ea:20:ff:ff:ff\0" \ "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ "ubi.mtd=${as} root=ubi0:rootfs\0" \ "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ @@ -313,6 +312,6 @@ "fi;" \ "else echo U-Boot not downloaded..exiting;fi\0" \ "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ - "bootcmd=run tempmac;run net_testrfs\0" + "bootcmd=run net_testrfs\0" #endif /* __CONFIG_H */ diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index 854807d486..5d28d8bf08 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -280,7 +280,6 @@ /*#define CONFIG_SHOW_ACTIVITY*/ #define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ -#define CONFIG_ETHADDR 00:00:7a:cc:00:13 #define CONFIG_PHY_ADDR 0x00 /* diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index ed2dd2a847..7c320eeb64 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -260,16 +260,6 @@ /* USE GRETH Ethernet Driver */ #define CONFIG_GRETH 1 -/* Default GRETH Ethernet HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7a -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x13 -#endif - -#define CONFIG_ETHADDR 00:00:7a:cc:00:13 #define CONFIG_PHY_ADDR 0x00 /* diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index e3cbb6f596..fdd0aa5455 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -220,15 +220,6 @@ */ #define CONFIG_GRETH 1 -/* Default GRETH Ethernet HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7a -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x12 - -#define CONFIG_ETHADDR 00:00:7a:cc:00:12 #define CONFIG_PHY_ADDR 0x00 /* diff --git a/include/configs/grsim.h b/include/configs/grsim.h index 1e089a9bf7..21b4f5e5d4 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -94,7 +94,6 @@ "rootpath=/export/roofs\0" \ "scratch=40000000\0" \ "getkernel=tftpboot $(scratch) $(bootfile)\0" \ - "ethaddr=00:00:7A:CC:00:12\0" \ "bootargs=console=ttyS0,38400" \ "" #define CONFIG_NETMASK 255.255.255.0 @@ -243,16 +242,6 @@ */ #define CONFIG_GRETH 1 -/* Default HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7A -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x12 - -#define CONFIG_ETHADDR 00:00:7a:cc:00:12 - /* * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s */ diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 66194a8ff0..f050754a75 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -91,7 +91,6 @@ "rootpath=/export/roofs\0" \ "scratch=40000000\0" \ "getkernel=tftpboot $(scratch) $(bootfile)\0" \ - "ethaddr=00:00:7A:CC:00:12\0" \ "bootargs=console=ttyS0,38400" \ "" #define CONFIG_NETMASK 255.255.255.0 @@ -241,16 +240,6 @@ */ /*#define CONFIG_GRETH 1*/ -/* Default HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7A -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x12 - -#define CONFIG_ETHADDR 00:00:7a:cc:00:12 - /* * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s */ diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 2a937c6a22..4757929618 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -64,8 +64,6 @@ #define CONFIG_DRIVER_AX88180 1 #define AX88180_BASE 0x2c000000 #define CONFIG_HOSTNAME ibf-dsp561 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index f321975c47..92587349d1 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -110,9 +110,6 @@ #undef CONFIG_BOOTARGS -#define CONFIG_ETHADDR 00:a0:a4:03:00:00 -#define CONFIG_OVERWRITE_ETHADDR_ONCE - #define CONFIG_IPADDR 192.168.100.2 #define CONFIG_SERVERIP 192.168.100.1 #define CONFIG_NETMASK 255.255.255.0 diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 166ab4f056..b84eead661 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -350,7 +350,6 @@ #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 #define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD /* architecture dependent code */ #define CONFIG_SYS_USR_EXCEP /* user exception */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index e8b05932a1..4d648c8a14 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -85,8 +85,6 @@ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_ETHADDR 00:50:C2:40:10:00 -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ /* diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h index 3030054949..20826790fa 100644 --- a/include/configs/omap3_cairo.h +++ b/include/configs/omap3_cairo.h @@ -90,7 +90,6 @@ "machid=ffffffff\0" \ "fdt_high=0x87000000\0" \ "baudrate=115200\0" \ - "ethaddr=00:50:C2:7E:90:F0\0" \ "fec_addr=00:50:C2:7E:90:F0\0" \ "netmask=255.255.255.0\0" \ "ipaddr=192.168.2.9\0" \ diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index eea587cb24..8d3dfe5103 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -27,8 +27,6 @@ #endif #endif -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ - #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 13fb675a5f..b9253b9684 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -69,8 +69,6 @@ #endif #define CONFIG_HOSTNAME pr1 #define CONFIG_TFTP_BLOCKSIZE 4404 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 69dc210917..11bf504832 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -102,7 +102,6 @@ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ #define CONFIG_IPADDR 192.168.193.102 #define CONFIG_NETMASK 255.255.255.224 #define CONFIG_SERVERIP 192.168.193.119 diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index aee0d9e273..5b373cb0f1 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -581,13 +581,9 @@ /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 02:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD #endif #define CONFIG_IPADDR 192.168.0.55 diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 8eb7276618..021da50aa8 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -14,7 +14,7 @@ * SBC8641D board configuration file * * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + * search for CONFIG_SERVERIP, etc in this file. */ #ifndef __CONFIG_H @@ -528,14 +528,6 @@ * Environment Configuration */ -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 02:E0:0C:00:00:01 -#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD -#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD -#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD -#endif - #define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index f4a40bb932..6cac99e042 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -50,7 +50,6 @@ #define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328" #define CONFIG_BOOTCOMMAND "bootm 10040000" #define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_ETHADDR 80:81:82:83:84:85 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 10.10.10.9 #define CONFIG_SERVERIP 10.10.10.10 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index b6a5e6a59c..623be7d39b 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -100,15 +100,6 @@ #if defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store env in memory only */ #define CONFIG_ENV_SIZE (8 << 10) -/* - * In RAM-booting version, we have no environment storage. So we need to - * provide at least preliminary MAC addresses for the 4xx EMAC driver to - * register the interfaces. Those two addresses are generated via the - * tools/gen_eth_addr tool and should only be used in a closed laboratory - * environment. - */ -#define CONFIG_ETHADDR 4a:56:49:22:3e:43 -#define CONFIG_ETH1ADDR 02:93:53:d5:06:98 #else #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environ vars */ #endif diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 5fb40ebf8b..a0817a0f80 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -13,7 +13,7 @@ /* mpc8560ads board configuration file */ /* please refer to doc/README.mpc85xx for more info */ /* make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + * search for CONFIG_SERVERIP, etc. in this file */ #ifndef __CONFIG_H @@ -342,14 +342,10 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #endif -/*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c #endif #define CONFIG_SERVERIP 192.168.85.1 diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 914d821905..78ac0801d5 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -13,7 +13,7 @@ /* mpc8560ads board configuration file */ /* please refer to doc/README.mpc85xx for more info */ /* make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + * search for CONFIG_SERVERIP, etc. in this file */ #ifndef __CONFIG_H @@ -377,14 +377,10 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #endif -/*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c #endif /* diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index e96a7427e5..d4c89b6fce 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -66,8 +66,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME tcm-bf518 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 42129fb7d8..33265801a6 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -71,8 +71,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME tcm-bf537 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index d4688c54ba..331df6251a 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -209,7 +209,6 @@ /* * Network Configuration */ -#define CONFIG_ETHADDR 00:21:83:24:00:00 #define CONFIG_SERVERIP 192.168.11.1 #define CONFIG_IPADDR 192.168.11.10 #define CONFIG_GATEWAYIP 192.168.11.1 diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 7f6b0c7cb2..688d60e8fb 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -148,7 +148,6 @@ "netmask=255.255.0.0\0" \ "ipaddr=192.168.160.18\0" \ "serverip=192.168.1.1\0" \ - "ethaddr=00:e0:ee:00:05:2e\0" \ "bootfile=/tftpboot/v38b/uImage\0" \ "u-boot=/tftpboot/v38b/u-boot.bin\0" \ "" diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index dc8e99fffd..4725fc3d89 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -176,17 +176,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x00120000 #define CONFIG_ENV_ADDR 0x80000100 -/* - * Provide default ethernet address - * - * THIS IS NORMALLY NOT DONE. HERE WE KEEP WHAT WAS IN THE PORTED - * BOARD CONFIG IN CASE SOME PROVISIONING PROCESS OUT THERE EXPECTS - * THIS MAC ADDRESS WHEN THE DEVICE HAS STILL ITS DEFAULT CONFIG. - */ - -#define CONFIG_ETHADDR 00:12:B4:00:AF:FE -#define CONFIG_OVERWRITE_ETHADDR_ONCE - /* * U-Boot Commands */ diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 2999d1b0f5..fcb76a27a2 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -70,7 +70,6 @@ #undef CONFIG_CMD_DTT -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.68.201 #define CONFIG_SERVERIP 192.168.68.62 diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 4d7a7fc755..9ac4a0f04a 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -296,8 +296,6 @@ #define CONFIG_IPADDR 192.168.1.10 #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_GATEWAYIP 192.168.1.100 -#define CONFIG_ETHADDR 50:00:00:00:06:00 -#define CONFIG_ETH1ADDR 50:00:00:00:06:01 #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else diff --git a/include/env_default.h b/include/env_default.h index 90431beb19..3096576836 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -49,24 +49,6 @@ const uchar default_environment[] = { #ifdef CONFIG_LOADS_ECHO "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" #endif -#ifdef CONFIG_ETHADDR - "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" -#endif -#ifdef CONFIG_ETH1ADDR - "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" -#endif -#ifdef CONFIG_ETH2ADDR - "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" -#endif -#ifdef CONFIG_ETH3ADDR - "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" -#endif -#ifdef CONFIG_ETH4ADDR - "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" -#endif -#ifdef CONFIG_ETH5ADDR - "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" -#endif #ifdef CONFIG_ETHPRIME "ethprime=" CONFIG_ETHPRIME "\0" #endif