From: Chris Packham Date: Fri, 19 Jun 2015 08:25:59 +0000 (+1200) Subject: README: Describe CONFIG_SYS_NO_FLASH X-Git-Tag: KARO-TX6-2015-09-18~1609 X-Git-Url: https://git.karo-electronics.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=f5ddfd14ae2aee41fc8f31dd0412c71ff4f23c0f README: Describe CONFIG_SYS_NO_FLASH Unlike most configuration options defining this actually disables support for a feature (parallel flash). Eventually the logic behind this should probably be flipped so that '#ifndef CONFIG_SYS_NO_FLASH' becomes '#ifdef CONFIG_HAS_PARALLEL_FLASH' but for now lets document the existing behaviour. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese --- diff --git a/README b/README index 074a826b62..57372fc714 100644 --- a/README +++ b/README @@ -3158,6 +3158,19 @@ CBFS (Coreboot Filesystem) support this is instead controlled by the value of /config/load-environment. +- Parallel Flash support: + CONFIG_SYS_NO_FLASH + + Traditionally U-boot was run on systems with parallel NOR + flash. This option is used to disable support for parallel NOR + flash. This option should be defined if the board does not have + parallel flash. + + If this option is not defined one of the generic flash drivers + (e.g. CONFIG_FLASH_CFI_DRIVER or CONFIG_ST_SMI) must be + selected or the board must provide an implementation of the + flash API (see include/flash.h). + - DataFlash Support: CONFIG_HAS_DATAFLASH