From f8fc4cc60d6da22622e3b86a34241bf8175c45ea Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 19 Apr 2015 07:21:01 -0600 Subject: [PATCH] dm: Update the README to reflect the current test output There are a lot more tests now. To avoid confusion add the updated test output to the driver model README. Signed-off-by: Simon Glass Reviewed-by: Joe Hershberger --- doc/driver-model/README.txt | 58 ++++++++++++++++++++++++++++++++----- 1 file changed, 50 insertions(+), 8 deletions(-) diff --git a/doc/driver-model/README.txt b/doc/driver-model/README.txt index f83264d615..f0276b1b46 100644 --- a/doc/driver-model/README.txt +++ b/doc/driver-model/README.txt @@ -95,43 +95,82 @@ are provided in test/dm. To run them, try: You should see something like this: <...U-Boot banner...> - Running 29 driver model tests + Running 53 driver model tests Test: dm_test_autobind Test: dm_test_autoprobe + Test: dm_test_bus_child_post_bind + Test: dm_test_bus_child_post_bind_uclass + Test: dm_test_bus_child_pre_probe_uclass Test: dm_test_bus_children - Device 'd-test': seq 3 is in use by 'b-test' - Device 'c-test@0': seq 0 is in use by 'a-test' - Device 'c-test@1': seq 1 is in use by 'd-test' + Device 'c-test@0': seq 0 is in use by 'd-test' + Device 'c-test@1': seq 1 is in use by 'f-test' Test: dm_test_bus_children_funcs Test: dm_test_bus_children_iterators Test: dm_test_bus_parent_data + Test: dm_test_bus_parent_data_uclass Test: dm_test_bus_parent_ops + Test: dm_test_bus_parent_platdata + Test: dm_test_bus_parent_platdata_uclass Test: dm_test_children + Test: dm_test_device_get_uclass_id + Test: dm_test_eth + Using eth@10002000 device + Using eth@10003000 device + Using eth@10004000 device + Test: dm_test_eth_alias + Using eth@10002000 device + Using eth@10004000 device + Using eth@10002000 device + Using eth@10003000 device + Test: dm_test_eth_prime + Using eth@10003000 device + Using eth@10002000 device + Test: dm_test_eth_rotate + + Error: eth@10004000 address not set. + + Error: eth@10004000 address not set. + Using eth@10002000 device + + Error: eth@10004000 address not set. + + Error: eth@10004000 address not set. + Using eth@10004000 device Test: dm_test_fdt - Device 'd-test': seq 3 is in use by 'b-test' Test: dm_test_fdt_offset Test: dm_test_fdt_pre_reloc Test: dm_test_fdt_uclass_seq - Device 'd-test': seq 3 is in use by 'b-test' - Device 'a-test': seq 0 is in use by 'd-test' Test: dm_test_gpio extra-gpios: get_value: error: gpio b5 not reserved Test: dm_test_gpio_anon Test: dm_test_gpio_copy Test: dm_test_gpio_leak extra-gpios: get_value: error: gpio b5 not reserved + Test: dm_test_gpio_phandles Test: dm_test_gpio_requestf + Test: dm_test_i2c_bytewise + Test: dm_test_i2c_find + Test: dm_test_i2c_offset + Test: dm_test_i2c_offset_len + Test: dm_test_i2c_probe_empty + Test: dm_test_i2c_read_write + Test: dm_test_i2c_speed Test: dm_test_leak Test: dm_test_lifecycle + Test: dm_test_net_retry + Using eth@10004000 device + Using eth@10002000 device + Using eth@10004000 device Test: dm_test_operations Test: dm_test_ordering + Test: dm_test_pci_base + Test: dm_test_pci_swapcase Test: dm_test_platdata Test: dm_test_pre_reloc Test: dm_test_remove Test: dm_test_spi_find Invalid chip select 0:0 (err=-19) SF: Failed to get idcodes - Device 'name-emul': seq 0 is in use by 'name-emul' SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB Test: dm_test_spi_flash 2097152 bytes written in 0 ms @@ -150,6 +189,9 @@ You should see something like this: SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB Test: dm_test_uclass Test: dm_test_uclass_before_ready + Test: dm_test_usb_base + Test: dm_test_usb_flash + USB-1: scanning bus 1 for devices... 2 USB Device(s) found Failures: 0 -- 2.39.2