git.karo-electronics.de Git - karo-tx-uboot.git/search

]> git.karo-electronics.de Git - karo-tx-uboot.git/search

2018-02-08	Lothar Waßmann	arm: mx6ull: initialize AIPS-TZ3 bus	commit \| commitdiff \| tree
2018-01-10	Lothar Waßmann	karo: add workaround for Linux hang on i.MX6QP when...	commit \| commitdiff \| tree
2018-01-08	Lothar Waßmann	karo: tx6: enable raw initrd support	commit \| commitdiff \| tree
2018-01-08	Lothar Waßmann	karo: bootce: suppress mtdparts related error message...	commit \| commitdiff \| tree
2018-01-08	Lothar Waßmann	karo: txul: remove i2c_gpio_pads	commit \| commitdiff \| tree
2018-01-08	Lothar Waßmann	karo: tx6: change drive strength of Ethernet related...	commit \| commitdiff \| tree
2018-01-08	Lothar Waßmann	imx: mx6: align the SPEED_MED setting with the reset...	commit \| commitdiff \| tree
2018-01-08	Lothar Waßmann	karo: tx6: indentation cleanup	commit \| commitdiff \| tree
2018-01-08	Lothar Waßmann	karo: tx6: cleanup i2c_recover implementation	commit \| commitdiff \| tree
2018-01-08	Lothar Waßmann	karo: tx6: remove duplicate initialization of ENET...	commit \| commitdiff \| tree
2017-10-25	Lothar Waßmann	board: karo: add support for using Linux simple-panel...	commit \| commitdiff \| tree
2017-07-21	Lothar Waßmann	karo: tx6: add support for TX6QP-8137	commit \| commitdiff \| tree
2017-07-21	Lothar Waßmann	karo: tx6: prevent DTB from either being out of reach...	commit \| commitdiff \| tree
2017-07-21	Lothar Waßmann	karo: tx6: add support for Ka-Ro TX6UL-8013	commit \| commitdiff \| tree
2017-07-07	Lothar Waßmann	arm: mx6: add support for i.MX6ULL	commit \| commitdiff \| tree
2017-04-03	Lothar Waßmann	karo: add support for TX6UL-5012	commit \| commitdiff \| tree
2017-01-04	Lothar Waßmann	karo: tx6: use GP1 fuse for MIPI variant detection	commit \| commitdiff \| tree
2016-12-23	Lothar Waßmann	karo: tx6: support MIPI variant in board name	commit \| commitdiff \| tree
2016-07-11	Lothar Waßmann	karo: tx6ul: configure some more PMIC regs and disable...	commit \| commitdiff \| tree
2016-07-11	Lothar Waßmann	karo: tx6: configure PMIC to a consistent state upon...	commit \| commitdiff \| tree
2016-07-11	Lothar Waßmann	karo: tx6: fix offset voltage in formulas for calculating...	commit \| commitdiff \| tree
2016-07-11	Lothar Waßmann	karo: tx6: remove obsolete TX6Q-1020	commit \| commitdiff \| tree
2016-07-05	Lothar Waßmann	karo: tx6ul: fix wrong board name in U-Boot messages	commit \| commitdiff \| tree
2016-07-04	Lothar Waßmann	Merge branch 'tx6-bugfix'	commit \| commitdiff \| tree
2016-07-04	Lothar Waßmann	Merge branch 'tx53-bugfix'	commit \| commitdiff \| tree
2016-07-04	Lothar Waßmann	Merge branch 'tx28-bugfix'	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6: remove unreachable 'return' statements	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6: fix miscalculated start block for 'romupdate...	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6ul: rework PMIC support and print PMIC name...	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6ul: enable soft i2c driver and 'i2c' command	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6ul: rework I2C recovery routine to be more...	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6ul: change local 'tx6_' prefixes to 'tx6ul'	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6ul: configure JTAG_* pads for JTAG function...	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6: configure all pads with explicit pad_ctl...	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6: add TX6S LVDS module variants	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6: remove obsolete configs	commit \| commitdiff \| tree
2016-07-01	Lothar Waßmann	karo: tx6: introduce generic TARGET_EMMC/TARGET_NAND...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx28: fix bugs in 'romupdate' command	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx28: enable 'gpio' command	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	mxs_gpio: correctly use the GPIO API	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	mxs_gpio: improve readability by using '(void *)' on...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	mxs_gpio: remove unused defines	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx28: request gpio for acitivity LED and disable...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx28: enable activity led only on stk5-v3 baseboard	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx28: enable U-Boot build with different (or...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx28: explicitly configure pad config (voltage...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx28: remove LCD pad configuration from SPL	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	mxs: spl: print the actual battery brownout level rather...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	mxs: spl: adjust delay after setting CLKCTRL_PLL0CTRL0_POWER...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	mxs: spl: use writel() to Set/Clear registers rather...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	mxs: spl: replace bogus early_delay() function with...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	ARM: MXS: use 'struct mxs_digctl_regs' to access MXS_HW_DIGC...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx53: enable 'gpio' command	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx53: romupdate: fix calculation of starting...	commit \| commitdiff \| tree
2016-06-30	Lothar Waßmann	karo: tx53: various fixes for CONFIG_SECURE_BOOT	commit \| commitdiff \| tree
2016-06-29	Lothar Waßmann	fs/fs.c: correctly interpret the '(max)len' parameter...	commit \| commitdiff \| tree
2016-06-29	Lothar Waßmann	cmd_gpio.c: adjust help message depending on gpio_status...	commit \| commitdiff \| tree
2016-06-29	Lothar Waßmann	common/cmd_mtdparts.c: print ECC stats along with partition...	commit \| commitdiff \| tree
2016-06-29	Lothar Waßmann	common/cmd_mtdparts.c: use proper return values for...	commit \| commitdiff \| tree
2016-06-29	Lothar Waßmann	common/cmd_misc.c: fix return code of sleep command	commit \| commitdiff \| tree
2016-06-13	Lothar Waßmann	Merge branch 'tx28-update' into tx28-bugfix	commit \| commitdiff \| tree
2016-04-26	Lothar Waßmann	karo: tx6ul: disable the PMIC for '_noenv' U-Boot	commit \| commitdiff \| tree
2016-04-26	Lothar Waßmann	karo: tx6ul: make board string dependent on cpurev	commit \| commitdiff \| tree
2016-04-26	Lothar Waßmann	mx6: clock: use setup_gpmi_io_clk() to change nfc clk...	commit \| commitdiff \| tree
2016-04-26	Lothar Waßmann	mx6: clock: fix integer overflow in calculation of...	commit \| commitdiff \| tree
2016-04-26	Lothar Waßmann	mx6: ocotp: add timeout to busy wait loop	commit \| commitdiff \| tree
2016-04-26	Lothar Waßmann	karo: tx6: pmic: print PMIC name in boot messages	commit \| commitdiff \| tree
2016-04-19	Lothar Waßmann	arm: mx6: fix NFC clock get/set routines for i.MX6QP...	commit \| commitdiff \| tree
2016-04-19	Lothar Waßmann	karo: tx6: add support for TX6Q-8037 (i.MX6QP)	commit \| commitdiff \| tree
2016-04-19	Lothar Waßmann	karo: tx6: add support for boards with >= 2GiB memory	commit \| commitdiff \| tree
2016-04-19	Lothar Waßmann	karo: tx6: disable gpmi clk before changing podf and...	commit \| commitdiff \| tree
2016-04-19	Lothar Waßmann	karo: tx6: replace open coded interpretation of cpurev...	commit \| commitdiff \| tree
2016-04-18	Lothar Waßmann	karo: tx6: set LCD x, y dimensions to 0 when disabling LCD	commit \| commitdiff \| tree
2016-04-18	Lothar Waßmann	karo: tx6: rename CONFIG_SYS_BOOT_CMD_NAND to FDTSAVE_CMD_STR	commit \| commitdiff \| tree
2016-04-13	Lothar Waßmann	mx6: clock: take 'num' and 'denom' regs into account...	commit \| commitdiff \| tree
2016-04-13	Lothar Waßmann	net: fec: use correct sizes to clear and flush descriptors	commit \| commitdiff \| tree
2016-04-13	Lothar Waßmann	rename TX6Q-1033 to TX6Q-1036	commit \| commitdiff \| tree
2016-03-24	Lothar Waßmann	karo: tx28: supply a valid stack pointer to early SPL...	commit \| commitdiff \| tree
2016-03-24	Lothar Waßmann	karo: tx28: remove obsolete u-boot.bd	commit \| commitdiff \| tree
2016-03-24	Lothar Waßmann	mxs: spl: remove duplicate debug messages	commit \| commitdiff \| tree
2016-03-24	Lothar Waßmann	karo: tx6: remove redundant #ifndef CONFIG_TX6_UBOOT_MFG	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	Merge branch 'tx53-update-2016-02-03' into karo-tx6	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	Merge branch 'tx28-update-2016-02-03' into karo-tx6	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	Merge branch 'tx6-update-2016-02-03' into karo-tx6	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6ul: fix bogus GPIO numbers	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6ul: add pad settings for FT5x06 and USB pads...	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6ul: add support for TX6UL Mainboard (v1)	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6ul: defer mmc probing until environment has...	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6ul: proper initialize second FEC if available	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6ul: reorder functions to better follow which...	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6: check ctrlc before returning error code...	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx53: check ctrlc before returning error code...	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx53: don't return non-zero return value in board_init...	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6ul: make show_activity() bail out on GPIO...	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6ul: indentation fixes	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx6: don't write u-boot image with WITH_DROP_FFS	commit \| commitdiff \| tree
2016-02-18	Lothar Waßmann	karo: tx53: don't write u-boot image with WITH_DROP_FFS	commit \| commitdiff \| tree
2016-02-11	Lothar Waßmann	karo: tx28: set CONFIG_ENV_OVERWRITE also for NAND...	commit \| commitdiff \| tree
2016-02-11	Lothar Waßmann	karo: tx28: fix prototype of video_hw_init()	commit \| commitdiff \| tree
2016-02-11	Lothar Waßmann	karo: tx28: check ctrlc before returning error code...	commit \| commitdiff \| tree
next

UBoot for KaRo TX COM modules

RSS Atom