/*
- * Copyright (C) 2009 Texas Instruments Inc.
+ * Copyright (C) 2009-2010 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ * Felipe Balbi <balbi@ti.com>
*
+ * Modified from mach-omap2/board-ldp.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/i2c/twl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/board-zoom.h>
-
#include <plat/common.h>
#include <plat/board.h>
#include <plat/usb.h>
+#include <mach/board-zoom.h>
+
#include "board-flash.h"
#include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
-static struct omap_board_config_kernel zoom_config[] __initdata = {
+#define ZOOM3_EHCI_RESET_GPIO 64
+
+static void __init omap_zoom_init_irq(void)
+{
+ omap2_init_common_infrastructure();
+ if (machine_is_omap_zoom2())
+ omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ else if (machine_is_omap_zoom3())
+ omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
+
+ omap_init_irq();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ /* WLAN IRQ - GPIO 162 */
+ OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+ /* WLAN POWER ENABLE - GPIO 101 */
+ OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ /* WLAN SDIO: MMC3 CMD */
+ OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+ /* WLAN SDIO: MMC3 CLK */
+ OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+ /* WLAN SDIO: MMC3 DAT[0-3] */
+ OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+ OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+ OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+ OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
};
+#endif
static struct mtd_partition zoom_nand_partitions[] = {
/* All the partition sizes are listed in terms of NAND block size */
},
};
-static void __init omap_zoom_init_irq(void)
-{
- omap_board_config = zoom_config;
- omap_board_config_size = ARRAY_SIZE(zoom_config);
- omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
- omap_init_irq();
- omap_gpio_init();
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- /* WLAN IRQ - GPIO 162 */
- OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN POWER ENABLE - GPIO 101 */
- OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- /* WLAN SDIO: MMC3 CMD */
- OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN SDIO: MMC3 CLK */
- OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN SDIO: MMC3 DAT[0-3] */
- OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
- OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
- OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
- OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux NULL
-#endif
-
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 64,
+ .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO,
.reset_gpio_port[2] = -EINVAL,
};
static void __init omap_zoom_init(void)
{
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
- zoom_peripherals_init();
+ if (machine_is_omap_zoom2()) {
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ } else if (machine_is_omap_zoom3()) {
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+ omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
+ usb_ehci_init(&ehci_pdata);
+ }
+
board_nand_init(zoom_nand_partitions,
- ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
+ ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
zoom_debugboard_init();
-
- omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
- usb_ehci_init(&ehci_pdata);
+ zoom_peripherals_init();
+ zoom_display_init();
}
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+ .boot_params = 0x80000100,
+ .map_io = omap3_map_io,
+ .reserve = omap_reserve,
+ .init_irq = omap_zoom_init_irq,
+ .init_machine = omap_zoom_init,
+ .timer = &omap_timer,
+MACHINE_END
+
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,