Merge branch 'master' into tk71

[mv-sheeva.git] / arch / arm / mach-pxa / colibri-pxa270-evalboard.c

diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
deleted file mode 100644 (file)
index 0f3b632..0000000
--- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
- *
- *  Support for Toradex PXA270 based Colibri Evaluation Carrier Board
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
-       /* MMC */
-       GPIO32_MMC_CLK,
-       GPIO92_MMC_DAT_0,
-       GPIO109_MMC_DAT_1,
-       GPIO110_MMC_DAT_2,
-       GPIO111_MMC_DAT_3,
-       GPIO112_MMC_CMD,
-       GPIO0_GPIO,     /* SD detect */
-
-       /* FFUART */
-       GPIO39_FFUART_TXD,
-       GPIO34_FFUART_RXD,
-
-       /* UHC */
-       GPIO88_USBH1_PWR,
-       GPIO89_USBH1_PEN,
-       GPIO119_USBH2_PWR,
-       GPIO120_USBH2_PEN,
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
-       .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-       .gpio_power             = -1,
-       .gpio_card_detect       = GPIO0_COLIBRI_PXA270_SD_DETECT,
-       .gpio_card_ro           = -1,
-       .detect_delay_ms        = 200,
-};
-
-static void __init colibri_pxa270_mmc_init(void)
-{
-       pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
-}
-#else
-static inline void colibri_pxa270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_pxa270_ohci_init(struct device *dev)
-{
-       UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-       return 0;
-}
-
-static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
-       .port_mode      = PMM_PERPORT_MODE,
-       .flags          = ENABLE_PORT1 | ENABLE_PORT2 |
-                         POWER_CONTROL_LOW | POWER_SENSE_LOW,
-       .init           = colibri_pxa270_ohci_init,
-};
-
-static void __init colibri_pxa270_uhc_init(void)
-{
-       pxa_set_ohci_info(&colibri_pxa270_ohci_info);
-}
-#else
-static inline void colibri_pxa270_uhc_init(void) {}
-#endif
-
-void __init colibri_pxa270_evalboard_init(void)
-{
-       pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
-       pxa_set_ffuart_info(NULL);
-       pxa_set_btuart_info(NULL);
-       pxa_set_stuart_info(NULL);
-
-       colibri_pxa270_mmc_init();
-       colibri_pxa270_uhc_init();
-}
-