Merge tag 'v2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

[mv-sheeva.git] / arch / arm / mach-ux500 / include / mach / entry-macro.S

diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index 60ea88db8283a521db2fe1e7396d171bff76db6c..071bba94f7271470e0a2e4de884abcbf03b3d231 100644 (file)
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -11,79 +11,10 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
 
                .macro  disable_fiq
                .endm
 
-               .macro  get_irqnr_preamble, base, tmp
-               ldr     \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
-               .endm
-
                .macro  arch_ret_to_user, tmp1, tmp2
                .endm
-
-               /*
-                * The interrupt numbering scheme is defined in the
-                * interrupt controller spec.  To wit:
-                *
-                * Interrupts 0-15 are IPI
-                * 16-28 are reserved
-                * 29-31 are local.  We allow 30 to be used for the watchdog.
-                * 32-1020 are global
-                * 1021-1022 are reserved
-                * 1023 is "spurious" (no interrupt)
-                *
-                * For now, we ignore all local interrupts so only return an
-                * interrupt if it's between 30 and 1020. The test_for_ipi
-                * routine below will pick up on IPIs.
-                *
-                * A simple read from the controller will tell us the number
-                * of the highest priority enabled interrupt. We then just
-                * need to check whether it is in the valid range for an
-                * IRQ (30-1020 inclusive).
-                */
-
-               .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-               /* bits 12-10 = src CPU, 9-0 = int # */
-               ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-
-               ldr     \tmp, =1021
-
-               bic     \irqnr, \irqstat, #0x1c00
-
-               cmp     \irqnr, #29
-               cmpcc   \irqnr, \irqnr
-               cmpne   \irqnr, \tmp
-               cmpcs   \irqnr, \irqnr
-
-               .endm
-
-               /* We assume that irqstat (the raw value of the IRQ
-                * acknowledge register) is preserved from the macro above.
-                * If there is an IPI, we immediately signal end of
-                * interrupt on the controller, since this requires the
-                * original irqstat value which we won't easily be able
-                * to recreate later.
-                */
-
-               .macro test_for_ipi, irqnr, irqstat, base, tmp
-               bic     \irqnr, \irqstat, #0x1c00
-               cmp     \irqnr, #16
-               strcc   \irqstat, [\base, #GIC_CPU_EOI]
-               cmpcs   \irqnr, \irqnr
-               .endm
-
-               /* As above, this assumes that irqstat and base
-                * are preserved..
-                */
-
-               .macro test_for_ltirq, irqnr, irqstat, base, tmp
-               bic     \irqnr, \irqstat, #0x1c00
-               mov     \tmp, #0
-               cmp     \irqnr, #29
-               moveq   \tmp, #1
-               streq   \irqstat, [\base, #GIC_CPU_EOI]
-               cmp     \tmp, #0
-               .endm