/*
- * Copyright 2005-2008 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
*
* Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF534_H
#define _DEF_BF534_H
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
/************************************************************************************
** System MMR Register Map
*************************************************************************************/
#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
/* DMA Traffic Control Registers */
-#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
-#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
-
-/* Alternate deprecated register names (below) provided for backwards code compatibility */
-#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
-#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
+#define DMAC_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
+#define DMAC_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
-/* ************** UART CONTROLLER MASKS *************************/
-/* UARTx_LCR Masks */
-#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
-#define STB 0x04 /* Stop Bits */
-#define PEN 0x08 /* Parity Enable */
-#define EPS 0x10 /* Even Parity Select */
-#define STP 0x20 /* Stick Parity */
-#define SB 0x40 /* Set Break */
-#define DLAB 0x80 /* Divisor Latch Access */
-
-/* UARTx_MCR Mask */
-#define LOOP_ENA 0x10 /* Loopback Mode Enable */
-#define LOOP_ENA_P 0x04
-/* UARTx_LSR Masks */
-#define DR 0x01 /* Data Ready */
-#define OE 0x02 /* Overrun Error */
-#define PE 0x04 /* Parity Error */
-#define FE 0x08 /* Framing Error */
-#define BI 0x10 /* Break Interrupt */
-#define THRE 0x20 /* THR Empty */
-#define TEMT 0x40 /* TSR and UART_THR Empty */
-
-/* UARTx_IER Masks */
-#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
-#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
-#define ELSI 0x04 /* Enable RX Status Interrupt */
-
-/* UARTx_IIR Masks */
-#define NINT 0x01 /* Pending Interrupt */
-#define IIR_TX_READY 0x02 /* UART_THR empty */
-#define IIR_RX_READY 0x04 /* Receive data ready */
-#define IIR_LINE_CHANGE 0x06 /* Receive line status */
-#define IIR_STATUS 0x06
-
-/* UARTx_GCTL Masks */
-#define UCEN 0x01 /* Enable UARTx Clocks */
-#define IREN 0x02 /* Enable IrDA Mode */
-#define TPOLC 0x04 /* IrDA TX Polarity Change */
-#define RPOLC 0x08 /* IrDA RX Polarity Change */
-#define FPE 0x10 /* Force Parity Error On Transmit */
-#define FFE 0x20 /* Force Framing Error On Transmit */
-
/* **************** GENERAL PURPOSE TIMER MASKS **********************/
/* TIMER_ENABLE Masks */
#define TIMEN0 0x0001 /* Enable Timer 0 */
#define EMU_RUN 0x0200 /* Emulation Behavior Select */
#define ERR_TYP 0xC000 /* Error Type */
-/* ****************** GPIO PORTS F, G, H MASKS ***********************/
-/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
-/* Port F Masks */
-#define PF0 0x0001
-#define PF1 0x0002
-#define PF2 0x0004
-#define PF3 0x0008
-#define PF4 0x0010
-#define PF5 0x0020
-#define PF6 0x0040
-#define PF7 0x0080
-#define PF8 0x0100
-#define PF9 0x0200
-#define PF10 0x0400
-#define PF11 0x0800
-#define PF12 0x1000
-#define PF13 0x2000
-#define PF14 0x4000
-#define PF15 0x8000
-
-/* Port G Masks */
-#define PG0 0x0001
-#define PG1 0x0002
-#define PG2 0x0004
-#define PG3 0x0008
-#define PG4 0x0010
-#define PG5 0x0020
-#define PG6 0x0040
-#define PG7 0x0080
-#define PG8 0x0100
-#define PG9 0x0200
-#define PG10 0x0400
-#define PG11 0x0800
-#define PG12 0x1000
-#define PG13 0x2000
-#define PG14 0x4000
-#define PG15 0x8000
-
-/* Port H Masks */
-#define PH0 0x0001
-#define PH1 0x0002
-#define PH2 0x0004
-#define PH3 0x0008
-#define PH4 0x0010
-#define PH5 0x0020
-#define PH6 0x0040
-#define PH7 0x0080
-#define PH8 0x0100
-#define PH9 0x0200
-#define PH10 0x0400
-#define PH11 0x0800
-#define PH12 0x1000
-#define PH13 0x2000
-#define PH14 0x4000
-#define PH15 0x8000
-
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
/* EBIU_AMGCTL Masks */
#define AMCKEN 0x0001 /* Enable CLKOUT */
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */
/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
projects / mv-sheeva.git / blobdiff