#define _ASM_SYSTEM_H
#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <asm/atomic.h>
+
+#if !defined(CONFIG_LAZY_SAVE_FPU)
+struct fpu_state_struct;
+extern asmlinkage void fpu_save(struct fpu_state_struct *);
+#define switch_fpu(prev, next) \
+ do { \
+ if ((prev)->thread.fpu_flags & THREAD_HAS_FPU) { \
+ (prev)->thread.fpu_flags &= ~THREAD_HAS_FPU; \
+ (prev)->thread.uregs->epsw &= ~EPSW_FE; \
+ fpu_save(&(prev)->thread.fpu_state); \
+ } \
+ } while (0)
+#else
+#define switch_fpu(prev, next) do {} while (0)
+#endif
struct task_struct;
struct thread_struct;
/* context switching is now performed out-of-line in switch_to.S */
#define switch_to(prev, next, last) \
do { \
+ switch_fpu(prev, next); \
current->thread.wchan = (u_long) __builtin_return_address(0); \
(last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
mb(); \
#define nop() asm volatile ("nop")
-#endif /* !__ASSEMBLY__ */
-
/*
* Force strict CPU ordering.
* And yes, this is required on UP too when we're talking
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
-#else
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#else /* CONFIG_SMP */
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
-#endif
-
#define set_mb(var, value) do { var = value; mb(); } while (0)
+#endif /* CONFIG_SMP */
+
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define read_barrier_depends() do {} while (0)
#define smp_read_barrier_depends() do {} while (0)
-/*****************************************************************************/
-/*
- * interrupt control
- * - "disabled": run in IM1/2
- * - level 0 - GDB stub
- * - level 1 - virtual serial DMA (if present)
- * - level 5 - normal interrupt priority
- * - level 6 - timer interrupt
- * - "enabled": run in IM7
- */
-#ifdef CONFIG_MN10300_TTYSM
-#define MN10300_CLI_LEVEL EPSW_IM_2
-#else
-#define MN10300_CLI_LEVEL EPSW_IM_1
-#endif
-
-#define local_save_flags(x) \
-do { \
- typecheck(unsigned long, x); \
- asm volatile( \
- " mov epsw,%0 \n" \
- : "=d"(x) \
- ); \
-} while (0)
-
-#define local_irq_disable() \
-do { \
- asm volatile( \
- " and %0,epsw \n" \
- " or %1,epsw \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- : \
- : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \
- ); \
-} while (0)
-
-#define local_irq_save(x) \
-do { \
- local_save_flags(x); \
- local_irq_disable(); \
-} while (0)
-
-/*
- * we make sure local_irq_enable() doesn't cause priority inversion
- */
-#ifndef __ASSEMBLY__
-
-extern unsigned long __mn10300_irq_enabled_epsw;
-
-#endif
-
-#define local_irq_enable() \
-do { \
- unsigned long tmp; \
- \
- asm volatile( \
- " mov epsw,%0 \n" \
- " and %1,%0 \n" \
- " or %2,%0 \n" \
- " mov %0,epsw \n" \
- : "=&d"(tmp) \
- : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \
- : "cc" \
- ); \
-} while (0)
-
-#define local_irq_restore(x) \
-do { \
- typecheck(unsigned long, x); \
- asm volatile( \
- " mov %0,epsw \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- : \
- : "d"(x) \
- : "memory", "cc" \
- ); \
-} while (0)
-
-#define irqs_disabled() \
-({ \
- unsigned long flags; \
- local_save_flags(flags); \
- (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \
-})
-
-/* hook to save power by halting the CPU
- * - called from the idle loop
- * - must reenable interrupts (which takes three instruction cycles to complete)
- */
-#define safe_halt() \
-do { \
- asm volatile(" or %0,epsw \n" \
- " nop \n" \
- " nop \n" \
- " bset %2,(%1) \n" \
- : \
- : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
- : "cc" \
- ); \
-} while (0)
-
-#define STI or EPSW_IE|EPSW_IM,epsw
-#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
-
-/*****************************************************************************/
-/*
- * MN10300 doesn't actually have an exchange instruction
- */
-#ifndef __ASSEMBLY__
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((struct __xchg_dummy *)(x))
-
-static inline
-unsigned long __xchg(volatile unsigned long *m, unsigned long val)
-{
- unsigned long retval;
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- *m = val;
- local_irq_restore(flags);
- return retval;
-}
-
-#define xchg(ptr, v) \
- ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \
- (unsigned long)(v)))
-
-static inline unsigned long __cmpxchg(volatile unsigned long *m,
- unsigned long old, unsigned long new)
-{
- unsigned long retval;
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- local_irq_restore(flags);
- return retval;
-}
-
-#define cmpxchg(ptr, o, n) \
- ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
- (unsigned long)(o), \
- (unsigned long)(n)))
-
#endif /* !__ASSEMBLY__ */
-
#endif /* __KERNEL__ */
#endif /* _ASM_SYSTEM_H */
projects / mv-sheeva.git / blobdiff