+++ /dev/null
-/* MN10300 CPU core caching routines
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/smp.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-#define mn10300_dcache_inv_range_intr_interval \
- +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
-
-#if mn10300_dcache_inv_range_intr_interval > 0xff
-#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
-#endif
-
- .am33_2
-
- .globl mn10300_icache_inv
- .globl mn10300_dcache_inv
- .globl mn10300_dcache_inv_range
- .globl mn10300_dcache_inv_range2
- .globl mn10300_dcache_inv_page
-
-###############################################################################
-#
-# void mn10300_icache_inv(void)
-# Invalidate the entire icache
-#
-###############################################################################
- ALIGN
-mn10300_icache_inv:
- mov CHCTR,a0
-
- movhu (a0),d0
- btst CHCTR_ICEN,d0
- beq mn10300_icache_inv_end
-
- mov epsw,d1
- and ~EPSW_IE,epsw
- nop
- nop
-
- # disable the icache
- and ~CHCTR_ICEN,d0
- movhu d0,(a0)
-
- # and wait for it to calm down
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # invalidate
- or CHCTR_ICINV,d0
- movhu d0,(a0)
-
- # wait for the cache to finish
- mov CHCTR,a0
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # and reenable it
- and ~CHCTR_ICINV,d0
- or CHCTR_ICEN,d0
- movhu d0,(a0)
- movhu (a0),d0
-
- mov d1,epsw
-
-mn10300_icache_inv_end:
- ret [],0
-
-###############################################################################
-#
-# void mn10300_dcache_inv(void)
-# Invalidate the entire dcache
-#
-###############################################################################
- ALIGN
-mn10300_dcache_inv:
- mov CHCTR,a0
-
- movhu (a0),d0
- btst CHCTR_DCEN,d0
- beq mn10300_dcache_inv_end
-
- mov epsw,d1
- and ~EPSW_IE,epsw
- nop
- nop
-
- # disable the dcache
- and ~CHCTR_DCEN,d0
- movhu d0,(a0)
-
- # and wait for it to calm down
- setlb
- movhu (a0),d0
- btst CHCTR_DCBUSY,d0
- lne
-
- # invalidate
- or CHCTR_DCINV,d0
- movhu d0,(a0)
-
- # wait for the cache to finish
- mov CHCTR,a0
- setlb
- movhu (a0),d0
- btst CHCTR_DCBUSY,d0
- lne
-
- # and reenable it
- and ~CHCTR_DCINV,d0
- or CHCTR_DCEN,d0
- movhu d0,(a0)
- movhu (a0),d0
-
- mov d1,epsw
-
-mn10300_dcache_inv_end:
- ret [],0
-
-###############################################################################
-#
-# void mn10300_dcache_inv_range(unsigned start, unsigned end)
-# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
-# void mn10300_dcache_inv_page(unsigned start)
-# Invalidate a range of addresses on a page in the dcache
-#
-###############################################################################
- ALIGN
-mn10300_dcache_inv_page:
- mov PAGE_SIZE,d1
-mn10300_dcache_inv_range2:
- add d0,d1
-mn10300_dcache_inv_range:
- movm [d2,d3,a2],(sp)
- mov CHCTR,a2
-
- movhu (a2),d2
- btst CHCTR_DCEN,d2
- beq mn10300_dcache_inv_range_end
-
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
- # addr down
- mov d0,a1
-
- add L1_CACHE_BYTES,d1 # round end addr up
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
-
- clr d2 # we're going to clear tag ram
- # entries
-
- # read the tags from the tag RAM, and if they indicate a valid dirty
- # cache line then invalidate that line
- mov DCACHE_TAG(0,0),a0
- mov a1,d0
- and L1_CACHE_TAG_ENTRY,d0
- add d0,a0 # starting dcache tag RAM
- # access address
-
- sub a1,d1
- lsr L1_CACHE_SHIFT,d1 # total number of entries to
- # examine
-
- and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
-
-mn10300_dcache_inv_range_outer_loop:
- # disable interrupts
- mov epsw,d3
- and ~EPSW_IE,epsw
- nop # note that reading CHCTR and
- # AND'ing D0 occupy two delay
- # slots after disabling
- # interrupts
-
- # disable the dcache
- movhu (a2),d0
- and ~CHCTR_DCEN,d0
- movhu d0,(a2)
-
- # and wait for it to calm down
- setlb
- movhu (a2),d0
- btst CHCTR_DCBUSY,d0
- lne
-
-mn10300_dcache_inv_range_loop:
-
- # process the way 0 slot
- mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot
- btst L1_CACHE_TAG_VALID,d0
- beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
- # valid
-
- xor a1,d0
- lsr 12,d0
- bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
-
- mov d2,(a0) # kill the tag
-
-mn10300_dcache_inv_range_skip_0:
-
- # process the way 1 slot
- mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot
- btst L1_CACHE_TAG_VALID,d0
- beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
- # valid
-
- xor a1,d0
- lsr 12,d0
- bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
-
- mov d2,(a0) # kill the tag
-
-mn10300_dcache_inv_range_skip_1:
-
- # process the way 2 slot
- mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot
- btst L1_CACHE_TAG_VALID,d0
- beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
- # valid
-
- xor a1,d0
- lsr 12,d0
- bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
-
- mov d2,(a0) # kill the tag
-
-mn10300_dcache_inv_range_skip_2:
-
- # process the way 3 slot
- mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot
- btst L1_CACHE_TAG_VALID,d0
- beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
- # valid
-
- xor a1,d0
- lsr 12,d0
- bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
-
- mov d2,(a0) # kill the tag
-
-mn10300_dcache_inv_range_skip_3:
-
- # approx every N steps we re-enable the cache and see if there are any
- # interrupts to be processed
- # we also break out if we've reached the end of the loop
- # (the bottom nibble of the count is zero in both cases)
- add L1_CACHE_BYTES,a0
- add L1_CACHE_BYTES,a1
- add -1,d1
- btst mn10300_dcache_inv_range_intr_interval,d1
- bne mn10300_dcache_inv_range_loop
-
- # wait for the cache to finish what it's doing
- setlb
- movhu (a2),d0
- btst CHCTR_DCBUSY,d0
- lne
-
- # and reenable it
- or CHCTR_DCEN,d0
- movhu d0,(a2)
- movhu (a2),d0
-
- # re-enable interrupts
- # - we don't bother with delay NOPs as we'll have enough instructions
- # before we disable interrupts again to give the interrupts a chance
- # to happen
- mov d3,epsw
-
- # go around again if the counter hasn't yet reached zero
- add 0,d1
- bne mn10300_dcache_inv_range_outer_loop
-
-mn10300_dcache_inv_range_end:
- ret [d2,d3,a2],12
projects / mv-sheeva.git / blobdiff