* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "manroland,uc101";
compatible = "manroland,uc101";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x04000000>; // 64MB
- };
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- reg = <0xf0000000 0x00000100>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
gpt0: timer@600 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt1: timer@610 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt2: timer@620 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
};
gpt4: timer@640 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt5: timer@650 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt6: timer@660 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt7: timer@670 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ rtc@800 {
+ status = "disabled";
};
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ can@900 {
+ status = "disabled";
+ };
+
+ can@980 {
+ status = "disabled";
};
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
+ spi@f00 {
+ status = "disabled";
};
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
+ usb@1000 {
+ status = "disabled";
};
- serial@2000 { /* PSC1 in UART mode */
+ psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2000 0x100>;
- interrupts = <2 1 0>;
};
- serial@2200 { /* PSC2 in UART mode */
+ psc@2200 { // PSC2
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2200 0x100>;
- interrupts = <2 2 0>;
};
- serial@2c00 { /* PSC6 in UART mode */
+ psc@2400 { // PSC3
+ status = "disabled";
+ };
+
+ psc@2600 { // PSC4
+ status = "disabled";
+ };
+
+ psc@2800 { // PSC5
+ status = "disabled";
+ };
+
+ psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2c00 0x100>;
- interrupts = <2 4 0>;
};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
compatible = "intel,lxt971";
reg = <0>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
+ i2c@3d00 {
+ status = "disabled";
};
i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
fsl,preserve-clocking;
clock-frequency = <400000>;
reg = <0x51>;
};
};
+ };
- sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
- reg = <0x8000 0x4000>;
- };
+ pci@f0000d00 {
+ status = "disabled";
};
localbus {
- compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
-
ranges = <0 0 0xff800000 0x00800000
1 0 0x80000000 0x00800000
3 0 0x80000000 0x00800000>;
projects / mv-sheeva.git / blobdiff