]> git.karo-electronics.de Git - mv-sheeva.git/blobdiff - arch/sh/boards/mach-microdev/io.c
Merge branch 'master' into tk71
[mv-sheeva.git] / arch / sh / boards / mach-microdev / io.c
index 2960c659020ee92e6c60c5c1d16d8d05ab73e267..acdafb0c6404a153cc482e46c0a17287f15ea26e 100644 (file)
@@ -54,7 +54,7 @@
 /*
  * map I/O ports to memory-mapped addresses
  */
-static unsigned long microdev_isa_port2addr(unsigned long offset)
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
 {
        unsigned long result;
 
@@ -72,16 +72,6 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
                         *      Configuration Registers
                         */
                result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
-       } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
-                  offset == KBD_STATUS_REG) {
-                       /*
-                        *      SMSC FDC37C93xAPM SuperIO chip
-                        *
-                        *      PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
-                        */
-               result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
        } else if (((offset >= IO_IDE1_BASE) &&
                    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
                    (offset == IO_IDE1_MISC)) {
@@ -131,237 +121,5 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
                result = PVR;
        }
 
-       return result;
-}
-
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
-
-static inline void delay(void)
-{
-#if defined(CONFIG_PCI)
-       /* System board present, just make a dummy SRAM access.  (CS0 will be
-          mapped to PCI memory, probably good to avoid it.) */
-       __raw_readw(0xa6800000);
-#else
-       /* CS0 will be mapped to flash, ROM etc so safe to access it. */
-       __raw_readw(0xa0000000);
-#endif
-}
-
-unsigned char microdev_inb(unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO)
-               return microdev_pci_inb(port);
-#endif
-       return *(volatile unsigned char*)PORT2ADDR(port);
-}
-
-unsigned short microdev_inw(unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO)
-               return microdev_pci_inw(port);
-#endif
-       return *(volatile unsigned short*)PORT2ADDR(port);
-}
-
-unsigned int microdev_inl(unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO)
-               return microdev_pci_inl(port);
-#endif
-       return *(volatile unsigned int*)PORT2ADDR(port);
-}
-
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO) {
-               microdev_pci_outw(b, port);
-               return;
-       }
-#endif
-       *(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
-void microdev_outb(unsigned char b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO) {
-               microdev_pci_outb(b, port);
-               return;
-       }
-#endif
-
-       /*
-        *      There is a board feature with the current SH4-202 MicroDev in
-        *      that the 2 byte enables (nBE0 and nBE1) are tied together (and
-        *      to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
-        *      it is not possible to safely perform 8-bit writes to the
-        *      Ethernet registers, as 16-bits will be consumed from the Data
-        *      lines (corrupting the other byte).  Hence, this function is
-        *      written to implement 16-bit read/modify/write for all byte-wide
-        *      accesses.
-        *
-        *      Note: there is no problem with byte READS (even or odd).
-        *
-        *                      Sean McGoogan - 16th June 2003.
-        */
-       if ((port >= IO_LAN91C111_BASE) &&
-           (port <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-                       /*
-                        * Then are trying to perform a byte-write to the
-                        * LAN91C111.  This needs special care.
-                        */
-               if (port % 2 == 1) {    /* is the port odd ? */
-                       /* unset bit-0, i.e. make even */
-                       const unsigned long evenPort = port-1;
-                       unsigned short word;
-
-                       /*
-                        * do a 16-bit read/write to write to 'port',
-                        * preserving even byte.
-                        *
-                        *      Even addresses are bits 0-7
-                        *      Odd  addresses are bits 8-15
-                        */
-                       word = microdev_inw(evenPort);
-                       word = (word & 0xffu) | (b << 8);
-                       microdev_outw(word, evenPort);
-               } else {
-                       /* else, we are trying to do an even byte write */
-                       unsigned short word;
-
-                       /*
-                        * do a 16-bit read/write to write to 'port',
-                        * preserving odd byte.
-                        *
-                        *      Even addresses are bits 0-7
-                        *      Odd  addresses are bits 8-15
-                        */
-                       word = microdev_inw(port);
-                       word = (word & 0xff00u) | (b);
-                       microdev_outw(word, port);
-               }
-       } else {
-               *(volatile unsigned char*)PORT2ADDR(port) = b;
-       }
-}
-
-void microdev_outl(unsigned int b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO) {
-               microdev_pci_outl(b, port);
-               return;
-       }
-#endif
-       *(volatile unsigned int*)PORT2ADDR(port) = b;
-}
-
-unsigned char microdev_inb_p(unsigned long port)
-{
-       unsigned char v = microdev_inb(port);
-       delay();
-       return v;
-}
-
-unsigned short microdev_inw_p(unsigned long port)
-{
-       unsigned short v = microdev_inw(port);
-       delay();
-       return v;
-}
-
-unsigned int microdev_inl_p(unsigned long port)
-{
-       unsigned int v = microdev_inl(port);
-       delay();
-       return v;
-}
-
-void microdev_outb_p(unsigned char b, unsigned long port)
-{
-       microdev_outb(b, port);
-       delay();
-}
-
-void microdev_outw_p(unsigned short b, unsigned long port)
-{
-       microdev_outw(b, port);
-       delay();
-}
-
-void microdev_outl_p(unsigned int b, unsigned long port)
-{
-       microdev_outl(b, port);
-       delay();
-}
-
-void microdev_insb(unsigned long port, void *buffer, unsigned long count)
-{
-       volatile unsigned char *port_addr;
-       unsigned char *buf = buffer;
-
-       port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-       while (count--)
-               *buf++ = *port_addr;
-}
-
-void microdev_insw(unsigned long port, void *buffer, unsigned long count)
-{
-       volatile unsigned short *port_addr;
-       unsigned short *buf = buffer;
-
-       port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-       while (count--)
-               *buf++ = *port_addr;
-}
-
-void microdev_insl(unsigned long port, void *buffer, unsigned long count)
-{
-       volatile unsigned long *port_addr;
-       unsigned int *buf = buffer;
-
-       port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-       while (count--)
-               *buf++ = *port_addr;
-}
-
-void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
-{
-       volatile unsigned char *port_addr;
-       const unsigned char *buf = buffer;
-
-       port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-       while (count--)
-               *port_addr = *buf++;
-}
-
-void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
-{
-       volatile unsigned short *port_addr;
-       const unsigned short *buf = buffer;
-
-       port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-       while (count--)
-               *port_addr = *buf++;
-}
-
-void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
-{
-       volatile unsigned long *port_addr;
-       const unsigned int *buf = buffer;
-
-       port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-       while (count--)
-               *port_addr = *buf++;
+       return (void __iomem *)result;
 }