/* unfortunately push/pop can't be no-op */
.macro PUSH_GS
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
.endm
.macro POP_GS pop=0
addl $(4 + \pop), %esp
#else /* CONFIG_X86_32_LAZY_GS */
.macro PUSH_GS
- pushl %gs
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %gs
/*CFI_REL_OFFSET gs, 0*/
.endm
.macro POP_GS pop=0
-98: popl %gs
- CFI_ADJUST_CFA_OFFSET -4
+98: popl_cfi %gs
/*CFI_RESTORE gs*/
.if \pop <> 0
add $\pop, %esp
.macro SAVE_ALL
cld
PUSH_GS
- pushl %fs
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %fs
/*CFI_REL_OFFSET fs, 0;*/
- pushl %es
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %es
/*CFI_REL_OFFSET es, 0;*/
- pushl %ds
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ds
/*CFI_REL_OFFSET ds, 0;*/
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
CFI_REL_OFFSET eax, 0
- pushl %ebp
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ebp
CFI_REL_OFFSET ebp, 0
- pushl %edi
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %edi
CFI_REL_OFFSET edi, 0
- pushl %esi
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %esi
CFI_REL_OFFSET esi, 0
- pushl %edx
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %edx
CFI_REL_OFFSET edx, 0
- pushl %ecx
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ecx
CFI_REL_OFFSET ecx, 0
- pushl %ebx
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ebx
CFI_REL_OFFSET ebx, 0
movl $(__USER_DS), %edx
movl %edx, %ds
.endm
.macro RESTORE_INT_REGS
- popl %ebx
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %ebx
CFI_RESTORE ebx
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %ecx
CFI_RESTORE ecx
- popl %edx
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %edx
CFI_RESTORE edx
- popl %esi
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %esi
CFI_RESTORE esi
- popl %edi
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %edi
CFI_RESTORE edi
- popl %ebp
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %ebp
CFI_RESTORE ebp
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %eax
CFI_RESTORE eax
.endm
.macro RESTORE_REGS pop=0
RESTORE_INT_REGS
-1: popl %ds
- CFI_ADJUST_CFA_OFFSET -4
+1: popl_cfi %ds
/*CFI_RESTORE ds;*/
-2: popl %es
- CFI_ADJUST_CFA_OFFSET -4
+2: popl_cfi %es
/*CFI_RESTORE es;*/
-3: popl %fs
- CFI_ADJUST_CFA_OFFSET -4
+3: popl_cfi %fs
/*CFI_RESTORE fs;*/
POP_GS \pop
.pushsection .fixup, "ax"
ENTRY(ret_from_fork)
CFI_STARTPROC
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
call schedule_tail
GET_THREAD_INFO(%ebp)
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
- pushl $0x0202 # Reset kernel eflags
- CFI_ADJUST_CFA_OFFSET 4
- popfl
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %eax
+ pushl_cfi $0x0202 # Reset kernel eflags
+ popfl_cfi
jmp syscall_exit
CFI_ENDPROC
END(ret_from_fork)
* enough kernel state to call TRACE_IRQS_OFF can be called - but
* we immediately enable interrupts at that point anyway.
*/
- pushl $(__USER_DS)
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $__USER_DS
/*CFI_REL_OFFSET ss, 0*/
- pushl %ebp
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ebp
CFI_REL_OFFSET esp, 0
- pushfl
+ pushfl_cfi
orl $X86_EFLAGS_IF, (%esp)
- CFI_ADJUST_CFA_OFFSET 4
- pushl $(__USER_CS)
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $__USER_CS
/*CFI_REL_OFFSET cs, 0*/
/*
* Push current_thread_info()->sysenter_return to the stack.
* A tiny bit of offset fixup is necessary - 4*4 means the 4 words
* pushed above; +8 corresponds to copy_thread's esp0 setting.
*/
- pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp)
CFI_REL_OFFSET eip, 0
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
SAVE_ALL
ENABLE_INTERRUPTS(CLBR_NONE)
movl %eax,%edx /* 2nd arg: syscall number */
movl $AUDIT_ARCH_I386,%eax /* 1st arg: audit arch */
call audit_syscall_entry
- pushl %ebx
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ebx
movl PT_EAX(%esp),%eax /* reload syscall number */
jmp sysenter_do_call
# system call handler stub
ENTRY(system_call)
RING0_INT_FRAME # can't unwind into user space anyway
- pushl %eax # save orig_eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax # save orig_eax
SAVE_ALL
GET_THREAD_INFO(%ebp)
# system call tracing in operation / emulation
je ldt_ss # returning to user-space with LDT SS
restore_nocheck:
RESTORE_REGS 4 # skip orig_eax/error_code
- CFI_ADJUST_CFA_OFFSET -4
irq_return:
INTERRUPT_RETURN
.section .fixup,"ax"
shr $16, %edx
mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
- pushl $__ESPFIX_SS
- CFI_ADJUST_CFA_OFFSET 4
- push %eax /* new kernel esp */
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $__ESPFIX_SS
+ pushl_cfi %eax /* new kernel esp */
/* Disable interrupts, but do not irqtrace this section: we
* will soon execute iret and the tracer was already set to
* the irqstate after the iret */
ALIGN
work_notifysig_v86:
- pushl %ecx # save ti_flags for do_notify_resume
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ecx # save ti_flags for do_notify_resume
call save_v86_state # %eax contains pt_regs pointer
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %ecx
movl %eax, %esp
#else
movl %esp, %eax
#define PTREGSCALL3(name) \
ALIGN; \
ptregs_##name: \
+ CFI_STARTPROC; \
leal 4(%esp),%eax; \
- pushl %eax; \
+ pushl_cfi %eax; \
movl PT_EDX(%eax),%ecx; \
movl PT_ECX(%eax),%edx; \
movl PT_EBX(%eax),%eax; \
call sys_##name; \
addl $4,%esp; \
- ret
+ CFI_ADJUST_CFA_OFFSET -4; \
+ ret; \
+ CFI_ENDPROC; \
+ENDPROC(ptregs_##name)
PTREGSCALL1(iopl)
PTREGSCALL0(fork)
/* Clone is an oddball. The 4th arg is in %edi */
ALIGN;
ptregs_clone:
+ CFI_STARTPROC
leal 4(%esp),%eax
- pushl %eax
- pushl PT_EDI(%eax)
+ pushl_cfi %eax
+ pushl_cfi PT_EDI(%eax)
movl PT_EDX(%eax),%ecx
movl PT_ECX(%eax),%edx
movl PT_EBX(%eax),%eax
call sys_clone
addl $8,%esp
+ CFI_ADJUST_CFA_OFFSET -8
ret
+ CFI_ENDPROC
+ENDPROC(ptregs_clone)
.macro FIXUP_ESPFIX_STACK
/*
mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
shl $16, %eax
addl %esp, %eax /* the adjusted stack pointer */
- pushl $__KERNEL_DS
- CFI_ADJUST_CFA_OFFSET 4
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $__KERNEL_DS
+ pushl_cfi %eax
lss (%esp), %esp /* switch to the normal stack segment */
CFI_ADJUST_CFA_OFFSET -8
.endm
.if vector <> FIRST_EXTERNAL_VECTOR
CFI_ADJUST_CFA_OFFSET -4
.endif
-1: pushl $(~vector+0x80) /* Note: always in signed byte range */
- CFI_ADJUST_CFA_OFFSET 4
+1: pushl_cfi $(~vector+0x80) /* Note: always in signed byte range */
.if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
jmp 2f
.endif
#define BUILD_INTERRUPT3(name, nr, fn) \
ENTRY(name) \
RING0_INT_FRAME; \
- pushl $~(nr); \
- CFI_ADJUST_CFA_OFFSET 4; \
+ pushl_cfi $~(nr); \
SAVE_ALL; \
TRACE_IRQS_OFF \
movl %esp,%eax; \
ENTRY(coprocessor_error)
RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_coprocessor_error
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
+ pushl_cfi $do_coprocessor_error
jmp error_code
CFI_ENDPROC
END(coprocessor_error)
ENTRY(simd_coprocessor_error)
RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
#ifdef CONFIG_X86_INVD_BUG
/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
-661: pushl $do_general_protection
+661: pushl_cfi $do_general_protection
662:
.section .altinstructions,"a"
.balign 4
664:
.previous
#else
- pushl $do_simd_coprocessor_error
+ pushl_cfi $do_simd_coprocessor_error
#endif
- CFI_ADJUST_CFA_OFFSET 4
jmp error_code
CFI_ENDPROC
END(simd_coprocessor_error)
ENTRY(device_not_available)
RING0_INT_FRAME
- pushl $-1 # mark this as an int
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_device_not_available
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $-1 # mark this as an int
+ pushl_cfi $do_device_not_available
jmp error_code
CFI_ENDPROC
END(device_not_available)
ENTRY(overflow)
RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_overflow
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
+ pushl_cfi $do_overflow
jmp error_code
CFI_ENDPROC
END(overflow)
ENTRY(bounds)
RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_bounds
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
+ pushl_cfi $do_bounds
jmp error_code
CFI_ENDPROC
END(bounds)
ENTRY(invalid_op)
RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_invalid_op
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
+ pushl_cfi $do_invalid_op
jmp error_code
CFI_ENDPROC
END(invalid_op)
ENTRY(coprocessor_segment_overrun)
RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_coprocessor_segment_overrun
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
+ pushl_cfi $do_coprocessor_segment_overrun
jmp error_code
CFI_ENDPROC
END(coprocessor_segment_overrun)
ENTRY(invalid_TSS)
RING0_EC_FRAME
- pushl $do_invalid_TSS
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $do_invalid_TSS
jmp error_code
CFI_ENDPROC
END(invalid_TSS)
ENTRY(segment_not_present)
RING0_EC_FRAME
- pushl $do_segment_not_present
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $do_segment_not_present
jmp error_code
CFI_ENDPROC
END(segment_not_present)
ENTRY(stack_segment)
RING0_EC_FRAME
- pushl $do_stack_segment
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $do_stack_segment
jmp error_code
CFI_ENDPROC
END(stack_segment)
ENTRY(alignment_check)
RING0_EC_FRAME
- pushl $do_alignment_check
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $do_alignment_check
jmp error_code
CFI_ENDPROC
END(alignment_check)
ENTRY(divide_error)
RING0_INT_FRAME
- pushl $0 # no error code
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_divide_error
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0 # no error code
+ pushl_cfi $do_divide_error
jmp error_code
CFI_ENDPROC
END(divide_error)
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl machine_check_vector
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
+ pushl_cfi machine_check_vector
jmp error_code
CFI_ENDPROC
END(machine_check)
ENTRY(spurious_interrupt_bug)
RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_spurious_interrupt_bug
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
+ pushl_cfi $do_spurious_interrupt_bug
jmp error_code
CFI_ENDPROC
END(spurious_interrupt_bug)
ENTRY(xen_hypervisor_callback)
CFI_STARTPROC
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $0
SAVE_ALL
TRACE_IRQS_OFF
# We distinguish between categories by maintaining a status value in EAX.
ENTRY(xen_failsafe_callback)
CFI_STARTPROC
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
movl $1,%eax
1: mov 4(%esp),%ds
2: mov 8(%esp),%es
3: mov 12(%esp),%fs
4: mov 16(%esp),%gs
testl %eax,%eax
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %eax
lea 16(%esp),%esp
CFI_ADJUST_CFA_OFFSET -16
jz 5f
addl $16,%esp
jmp iret_exc # EAX != 0 => Category 2 (Bad IRET)
-5: pushl $0 # EAX == 0 => Category 1 (Bad segment)
- CFI_ADJUST_CFA_OFFSET 4
+5: pushl_cfi $0 # EAX == 0 => Category 1 (Bad segment)
SAVE_ALL
jmp ret_from_exception
CFI_ENDPROC
ENTRY(page_fault)
RING0_EC_FRAME
- pushl $do_page_fault
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $do_page_fault
ALIGN
error_code:
/* the function address is in %gs's slot on the stack */
- pushl %fs
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %fs
/*CFI_REL_OFFSET fs, 0*/
- pushl %es
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %es
/*CFI_REL_OFFSET es, 0*/
- pushl %ds
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ds
/*CFI_REL_OFFSET ds, 0*/
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
CFI_REL_OFFSET eax, 0
- pushl %ebp
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ebp
CFI_REL_OFFSET ebp, 0
- pushl %edi
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %edi
CFI_REL_OFFSET edi, 0
- pushl %esi
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %esi
CFI_REL_OFFSET esi, 0
- pushl %edx
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %edx
CFI_REL_OFFSET edx, 0
- pushl %ecx
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ecx
CFI_REL_OFFSET ecx, 0
- pushl %ebx
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ebx
CFI_REL_OFFSET ebx, 0
cld
movl $(__KERNEL_PERCPU), %ecx
movl TSS_sysenter_sp0 + \offset(%esp), %esp
CFI_DEF_CFA esp, 0
CFI_UNDEFINED eip
- pushfl
- CFI_ADJUST_CFA_OFFSET 4
- pushl $__KERNEL_CS
- CFI_ADJUST_CFA_OFFSET 4
- pushl $sysenter_past_esp
- CFI_ADJUST_CFA_OFFSET 4
+ pushfl_cfi
+ pushl_cfi $__KERNEL_CS
+ pushl_cfi $sysenter_past_esp
CFI_REL_OFFSET eip, 0
.endm
jne debug_stack_correct
FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
debug_stack_correct:
- pushl $-1 # mark this as an int
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $-1 # mark this as an int
SAVE_ALL
TRACE_IRQS_OFF
xorl %edx,%edx # error code 0
*/
ENTRY(nmi)
RING0_INT_FRAME
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
movl %ss, %eax
cmpw $__ESPFIX_SS, %ax
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %eax
je nmi_espfix_stack
cmpl $ia32_sysenter_target,(%esp)
je nmi_stack_fixup
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
movl %esp,%eax
/* Do not access memory above the end of our stack page,
* it might not exist.
*/
andl $(THREAD_SIZE-1),%eax
cmpl $(THREAD_SIZE-20),%eax
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
+ popl_cfi %eax
jae nmi_stack_correct
cmpl $ia32_sysenter_target,12(%esp)
je nmi_debug_stack_check
nmi_stack_correct:
/* We have a RING0_INT_FRAME here */
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
*
* create the pointer to lss back
*/
- pushl %ss
- CFI_ADJUST_CFA_OFFSET 4
- pushl %esp
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %ss
+ pushl_cfi %esp
addl $4, (%esp)
/* copy the iret frame of 12 bytes */
.rept 3
- pushl 16(%esp)
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi 16(%esp)
.endr
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi %eax
SAVE_ALL
FIXUP_ESPFIX_STACK # %eax == %esp
xorl %edx,%edx # zero error code
ENTRY(int3)
RING0_INT_FRAME
- pushl $-1 # mark this as an int
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $-1 # mark this as an int
SAVE_ALL
TRACE_IRQS_OFF
xorl %edx,%edx # zero error code
ENTRY(general_protection)
RING0_EC_FRAME
- pushl $do_general_protection
- CFI_ADJUST_CFA_OFFSET 4
+ pushl_cfi $do_general_protection
jmp error_code
CFI_ENDPROC
END(general_protection)
projects / mv-sheeva.git / blobdiff