#include "drm.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+/* Here's the desired hotplug mode */
+#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \
+ ADPA_CRT_HOTPLUG_WARMUP_10MS | \
+ ADPA_CRT_HOTPLUG_SAMPLE_4S | \
+ ADPA_CRT_HOTPLUG_VOLTAGE_50 | \
+ ADPA_CRT_HOTPLUG_VOLREF_325MV | \
+ ADPA_CRT_HOTPLUG_ENABLE)
+
+struct intel_crt {
+ struct intel_encoder base;
+ bool force_hotplug_required;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+ return container_of(intel_attached_encoder(connector),
+ struct intel_crt, base);
+}
+
static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
if (mode->clock < 25000)
return MODE_CLOCK_LOW;
- if (!IS_I9XX(dev))
+ if (IS_GEN2(dev))
max_clock = 350000;
else
max_clock = 400000;
* Disable separate mode multiplier used when cloning SDVO to CRT
* XXX this needs to be adjusted when we really are cloning
*/
- if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) {
+ if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
dpll_md = I915_READ(dpll_md_reg);
I915_WRITE(dpll_md_reg,
dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
}
- adpa = 0;
+ adpa = ADPA_HOTPLUG_BITS;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
adpa |= ADPA_HSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
+ struct intel_crt *crt = intel_attached_crt(connector);
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 adpa, temp;
+ u32 adpa;
bool ret;
- bool turn_off_dac = false;
- temp = adpa = I915_READ(PCH_ADPA);
+ /* The first time through, trigger an explicit detection cycle */
+ if (crt->force_hotplug_required) {
+ bool turn_off_dac = HAS_PCH_SPLIT(dev);
+ u32 save_adpa;
- if (HAS_PCH_SPLIT(dev))
- turn_off_dac = true;
-
- adpa &= ~ADPA_CRT_HOTPLUG_MASK;
- if (turn_off_dac)
- adpa &= ~ADPA_DAC_ENABLE;
-
- /* disable HPD first */
- I915_WRITE(PCH_ADPA, adpa);
- (void)I915_READ(PCH_ADPA);
-
- adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
- ADPA_CRT_HOTPLUG_WARMUP_10MS |
- ADPA_CRT_HOTPLUG_SAMPLE_4S |
- ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
- ADPA_CRT_HOTPLUG_VOLREF_325MV |
- ADPA_CRT_HOTPLUG_ENABLE |
- ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
-
- DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa);
- I915_WRITE(PCH_ADPA, adpa);
-
- if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
- 1000, 1))
- DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
-
- if (turn_off_dac) {
- I915_WRITE(PCH_ADPA, temp);
- (void)I915_READ(PCH_ADPA);
+ crt->force_hotplug_required = 0;
+
+ save_adpa = adpa = I915_READ(PCH_ADPA);
+ DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+
+ adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+ if (turn_off_dac)
+ adpa &= ~ADPA_DAC_ENABLE;
+
+ I915_WRITE(PCH_ADPA, adpa);
+
+ if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+ 1000))
+ DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+
+ if (turn_off_dac) {
+ I915_WRITE(PCH_ADPA, save_adpa);
+ POSTING_READ(PCH_ADPA);
+ }
}
/* Check the status to see if both blue and green are on now */
adpa = I915_READ(PCH_ADPA);
- adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
- if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
- (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
+ if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
ret = true;
else
ret = false;
+ DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
return ret;
}
/* wait for FORCE_DETECT to go off */
if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
CRT_HOTPLUG_FORCE_DETECT) == 0,
- 1000, 1))
+ 1000))
DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
}
return ret;
}
-static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
+static bool intel_crt_ddc_probe(struct drm_i915_private *dev_priv, int ddc_bus)
+{
+ u8 buf;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = 0xA0,
+ .flags = 0,
+ .len = 1,
+ .buf = &buf,
+ },
+ };
+ /* DDC monitor detect: Does it ACK a write to 0xA0? */
+ return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
+}
+
+static bool intel_crt_detect_ddc(struct drm_connector *connector)
{
- struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_crt *crt = intel_attached_crt(connector);
+ struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
/* CRT should always be at 0, but check anyway */
- if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
+ if (crt->base.type != INTEL_OUTPUT_ANALOG)
return false;
- return intel_ddc_probe(intel_encoder);
+ if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
+ DRM_DEBUG_KMS("CRT detected via DDC:0xa0\n");
+ return true;
+ }
+
+ if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
+ struct edid *edid;
+ bool is_digital = false;
+
+ edid = drm_get_edid(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ /*
+ * This may be a DVI-I connector with a shared DDC
+ * link between analog and digital outputs, so we
+ * have to check the EDID input spec of the attached device.
+ */
+ if (edid != NULL) {
+ is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
+ connector->display_info.raw_edid = NULL;
+ kfree(edid);
+ }
+
+ if (!is_digital) {
+ DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
+ return true;
+ }
+ }
+
+ return false;
}
static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_crt *crt)
{
- struct drm_encoder *encoder = &intel_encoder->enc;
+ struct drm_encoder *encoder = &crt->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint8_t st00;
enum drm_connector_status status;
+ DRM_DEBUG_KMS("starting load-detect on CRT\n");
+
if (pipe == 0) {
bclrpat_reg = BCLRPAT_A;
vtotal_reg = VTOTAL_A;
/* Set the border color to purple. */
I915_WRITE(bclrpat_reg, 0x500050);
- if (IS_I9XX(dev)) {
+ if (!IS_GEN2(dev)) {
uint32_t pipeconf = I915_READ(pipeconf_reg);
I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
+ POSTING_READ(pipeconf_reg);
/* Wait for next Vblank to substitue
* border color for Color info */
intel_wait_for_vblank(dev, pipe);
intel_crt_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
- struct drm_encoder *encoder = intel_attached_encoder(connector);
- struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_crt *crt = intel_attached_crt(connector);
struct drm_crtc *crtc;
int dpms_mode;
enum drm_connector_status status;
- if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
- if (intel_crt_detect_hotplug(connector))
+ if (I915_HAS_HOTPLUG(dev)) {
+ if (intel_crt_detect_hotplug(connector)) {
+ DRM_DEBUG_KMS("CRT detected via hotplug\n");
return connector_status_connected;
- else
+ } else {
+ DRM_DEBUG_KMS("CRT not detected via hotplug\n");
return connector_status_disconnected;
+ }
}
- if (intel_crt_detect_ddc(encoder))
+ if (intel_crt_detect_ddc(connector))
return connector_status_connected;
if (!force)
return connector->status;
/* for pre-945g platforms use load detect */
- if (encoder->crtc && encoder->crtc->enabled) {
- status = intel_crt_load_detect(encoder->crtc, intel_encoder);
+ crtc = crt->base.base.crtc;
+ if (crtc && crtc->enabled) {
+ status = intel_crt_load_detect(crtc, crt);
} else {
- crtc = intel_get_load_detect_pipe(intel_encoder, connector,
+ crtc = intel_get_load_detect_pipe(&crt->base, connector,
NULL, &dpms_mode);
if (crtc) {
- status = intel_crt_load_detect(crtc, intel_encoder);
- intel_release_load_detect_pipe(intel_encoder,
+ if (intel_crt_detect_ddc(connector))
+ status = connector_status_connected;
+ else
+ status = intel_crt_load_detect(crtc, crt);
+ intel_release_load_detect_pipe(&crt->base,
connector, dpms_mode);
} else
status = connector_status_unknown;
static int intel_crt_get_modes(struct drm_connector *connector)
{
- int ret;
- struct drm_encoder *encoder = intel_attached_encoder(connector);
- struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
- struct i2c_adapter *ddc_bus;
struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
-
- ret = intel_ddc_get_modes(connector, intel_encoder->ddc_bus);
+ ret = intel_ddc_get_modes(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
if (ret || !IS_G4X(dev))
- goto end;
+ return ret;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
- ddc_bus = intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
-
- if (!ddc_bus) {
- dev_printk(KERN_ERR, &connector->dev->pdev->dev,
- "DDC bus registration failed for CRTDDC_D.\n");
- goto end;
- }
- /* Try to get modes by GPIOD port */
- ret = intel_ddc_get_modes(connector, ddc_bus);
- intel_i2c_destroy(ddc_bus);
-
-end:
- return ret;
-
+ return intel_ddc_get_modes(connector,
+ &dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
}
static int intel_crt_set_property(struct drm_connector *connector,
return 0;
}
+static void intel_crt_reset(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct intel_crt *crt = intel_attached_crt(connector);
+
+ if (HAS_PCH_SPLIT(dev))
+ crt->force_hotplug_required = 1;
+}
+
/*
* Routines for controlling stuff on the analog port
*/
};
static const struct drm_connector_funcs intel_crt_connector_funcs = {
+ .reset = intel_crt_reset,
.dpms = drm_helper_connector_dpms,
.detect = intel_crt_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
.mode_valid = intel_crt_mode_valid,
.get_modes = intel_crt_get_modes,
- .best_encoder = intel_attached_encoder,
+ .best_encoder = intel_best_encoder,
};
static const struct drm_encoder_funcs intel_crt_enc_funcs = {
void intel_crt_init(struct drm_device *dev)
{
struct drm_connector *connector;
- struct intel_encoder *intel_encoder;
+ struct intel_crt *crt;
struct intel_connector *intel_connector;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 i2c_reg;
- intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
- if (!intel_encoder)
+ crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+ if (!crt)
return;
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
- kfree(intel_encoder);
+ kfree(crt);
return;
}
drm_connector_init(dev, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
- drm_encoder_init(dev, &intel_encoder->enc, &intel_crt_enc_funcs,
+ drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC);
- drm_mode_connector_attach_encoder(&intel_connector->base,
- &intel_encoder->enc);
+ intel_connector_attach_encoder(intel_connector, &crt->base);
- /* Set up the DDC bus. */
- if (HAS_PCH_SPLIT(dev))
- i2c_reg = PCH_GPIOA;
- else {
- i2c_reg = GPIOA;
- /* Use VBT information for CRT DDC if available */
- if (dev_priv->crt_ddc_bus != 0)
- i2c_reg = dev_priv->crt_ddc_bus;
- }
- intel_encoder->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
- if (!intel_encoder->ddc_bus) {
- dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
- "failed.\n");
- return;
- }
-
- intel_encoder->type = INTEL_OUTPUT_ANALOG;
- intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
- (1 << INTEL_ANALOG_CLONE_BIT) |
- (1 << INTEL_SDVO_LVDS_CLONE_BIT);
- intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+ crt->base.type = INTEL_OUTPUT_ANALOG;
+ crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+ 1 << INTEL_ANALOG_CLONE_BIT |
+ 1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ crt->base.crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
- drm_encoder_helper_add(&intel_encoder->enc, &intel_crt_helper_funcs);
+ drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
else
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ /*
+ * Configure the automatic hotplug detection stuff
+ */
+ crt->force_hotplug_required = 0;
+ if (HAS_PCH_SPLIT(dev)) {
+ u32 adpa;
+
+ adpa = I915_READ(PCH_ADPA);
+ adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+ adpa |= ADPA_HOTPLUG_BITS;
+ I915_WRITE(PCH_ADPA, adpa);
+ POSTING_READ(PCH_ADPA);
+
+ DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
+ crt->force_hotplug_required = 1;
+ }
+
dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
}
projects / mv-sheeva.git / blobdiff