* offset (8 bit): opcode
* offset + 1 (16 bit): time
*
- * Sleep for "time" miliseconds.
+ * Sleep for "time" milliseconds.
*/
unsigned time = ROM16(bios->data[offset + 1]);
if (!iexec->execute)
return 3;
- BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X miliseconds\n",
+ BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X milliseconds\n",
offset, time);
msleep(time);
return entry;
}
-static void fabricate_vga_output(struct dcb_table *dcb, int i2c, int heads)
+static void fabricate_dcb_output(struct dcb_table *dcb, int type, int i2c,
+ int heads, int or)
{
struct dcb_entry *entry = new_dcb_entry(dcb);
- entry->type = 0;
+ entry->type = type;
entry->i2c_index = i2c;
entry->heads = heads;
- entry->location = DCB_LOC_ON_CHIP;
- entry->or = 1;
-}
-
-static void fabricate_dvi_i_output(struct dcb_table *dcb, bool twoHeads)
-{
- struct dcb_entry *entry = new_dcb_entry(dcb);
-
- entry->type = 2;
- entry->i2c_index = LEGACY_I2C_PANEL;
- entry->heads = twoHeads ? 3 : 1;
- entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
- entry->or = 1; /* means |0x10 gets set on CRE_LCD__INDEX */
- entry->duallink_possible = false; /* SiI164 and co. are single link */
-
-#if 0
- /*
- * For dvi-a either crtc probably works, but my card appears to only
- * support dvi-d. "nvidia" still attempts to program it for dvi-a,
- * doing the full fp output setup (program 0x6808.. fp dimension regs,
- * setting 0x680848 to 0x10000111 to enable, maybe setting 0x680880);
- * the monitor picks up the mode res ok and lights up, but no pixel
- * data appears, so the board manufacturer probably connected up the
- * sync lines, but missed the video traces / components
- *
- * with this introduction, dvi-a left as an exercise for the reader.
- */
- fabricate_vga_output(dcb, LEGACY_I2C_PANEL, entry->heads);
-#endif
-}
-
-static void fabricate_tv_output(struct dcb_table *dcb, bool twoHeads)
-{
- struct dcb_entry *entry = new_dcb_entry(dcb);
-
- entry->type = 1;
- entry->i2c_index = LEGACY_I2C_TV;
- entry->heads = twoHeads ? 3 : 1;
- entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
+ if (type != OUTPUT_ANALOG)
+ entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
+ entry->or = or;
}
static bool
entry->tvconf.has_component_output = false;
break;
case OUTPUT_LVDS:
- if ((conn & 0x00003f00) != 0x10)
+ if ((conn & 0x00003f00) >> 8 != 0x10)
entry->lvdsconf.use_straps_for_mode = true;
entry->lvdsconf.use_power_scripts = true;
break;
static bool
apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct dcb_table *dcb = &dev_priv->vbios.dcb;
+
/* Dell Precision M6300
* DCB entry 2: 02025312 00000010
* DCB entry 3: 02026312 00000020
return false;
}
+ /* GeForce3 Ti 200
+ *
+ * DCB reports an LVDS output that should be TMDS:
+ * DCB entry 1: f2005014 ffffffff
+ */
+ if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) {
+ if (*conn == 0xf2005014 && *conf == 0xffffffff) {
+ fabricate_dcb_output(dcb, OUTPUT_TMDS, 1, 1, 1);
+ return false;
+ }
+ }
+
return true;
}
+static void
+fabricate_dcb_encoder_table(struct drm_device *dev, struct nvbios *bios)
+{
+ struct dcb_table *dcb = &bios->dcb;
+ int all_heads = (nv_two_heads(dev) ? 3 : 1);
+
+#ifdef __powerpc__
+ /* Apple iMac G4 NV17 */
+ if (of_machine_is_compatible("PowerMac4,5")) {
+ fabricate_dcb_output(dcb, OUTPUT_TMDS, 0, all_heads, 1);
+ fabricate_dcb_output(dcb, OUTPUT_ANALOG, 1, all_heads, 2);
+ return;
+ }
+#endif
+
+ /* Make up some sane defaults */
+ fabricate_dcb_output(dcb, OUTPUT_ANALOG, LEGACY_I2C_CRT, 1, 1);
+
+ if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
+ fabricate_dcb_output(dcb, OUTPUT_TV, LEGACY_I2C_TV,
+ all_heads, 0);
+
+ else if (bios->tmds.output0_script_ptr ||
+ bios->tmds.output1_script_ptr)
+ fabricate_dcb_output(dcb, OUTPUT_TMDS, LEGACY_I2C_PANEL,
+ all_heads, 1);
+}
+
static int
-parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
+parse_dcb_table(struct drm_device *dev, struct nvbios *bios)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct dcb_table *dcb = &bios->dcb;
/* this situation likely means a really old card, pre DCB */
if (dcbptr == 0x0) {
- NV_INFO(dev, "Assuming a CRT output exists\n");
- fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
-
- if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
- fabricate_tv_output(dcb, twoHeads);
-
+ fabricate_dcb_encoder_table(dev, bios);
return 0;
}
*/
NV_TRACEWARN(dev, "No useful information in BIOS output table; "
"adding all possible outputs\n");
- fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
-
- /*
- * Attempt to detect TV before DVI because the test
- * for the former is more accurate and it rules the
- * latter out.
- */
- if (nv04_tv_identify(dev,
- bios->legacy.i2c_indices.tv) >= 0)
- fabricate_tv_output(dcb, twoHeads);
-
- else if (bios->tmds.output0_script_ptr ||
- bios->tmds.output1_script_ptr)
- fabricate_dvi_i_output(dcb, twoHeads);
-
+ fabricate_dcb_encoder_table(dev, bios);
return 0;
}
if (ret)
return ret;
- ret = parse_dcb_table(dev, bios, nv_two_heads(dev));
+ ret = parse_dcb_table(dev, bios);
if (ret)
return ret;
projects / mv-sheeva.git / blobdiff