config SENSORS_ADM1026
tristate "Analog Devices ADM1026 and compatibles"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM1026
config SENSORS_ADM1029
tristate "Analog Devices ADM1029"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
If you say yes here you get support for Analog Devices ADM1029
sensor chip.
config SENSORS_ADM1031
tristate "Analog Devices ADM1031 and compatibles"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.
config SENSORS_ADT7475
tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Analog Devices
This driver can also be built as a module. If so, the module
will be called k10temp.
-config SENSORS_AMS
- tristate "Apple Motion Sensor driver"
- depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
- select INPUT_POLLDEV
- help
- Support for the motion sensor included in PowerBooks. Includes
- implementations for PMU and I2C.
-
- This driver can also be built as a module. If so, the module
- will be called ams.
-
-config SENSORS_AMS_PMU
- bool "PMU variant"
- depends on SENSORS_AMS && ADB_PMU
- default y
- help
- PMU variant of motion sensor, found in late 2005 PowerBooks.
-
-config SENSORS_AMS_I2C
- bool "I2C variant"
- depends on SENSORS_AMS && I2C
- default y
- help
- I2C variant of motion sensor, found in early 2005 PowerBooks and
- iBooks.
-
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on X86 && I2C && EXPERIMENTAL
config SENSORS_F71805F
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
- depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
config SENSORS_F71882FG
tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
- depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
will be called f71882fg.
config SENSORS_F75375S
- tristate "Fintek F75375S/SP and F75373";
- depends on I2C && EXPERIMENTAL
+ tristate "Fintek F75375S/SP and F75373"
+ depends on I2C
help
If you say yes here you get support for hardware monitoring
features of the Fintek F75375S/SP and F75373
This driver can also be built as a module. If so, the module
will be called gl520sm.
+config SENSORS_GPIO_FAN
+ tristate "GPIO fan"
+ depends on GENERIC_GPIO
+ help
+ If you say yes here you get support for fans connected to GPIO lines.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-fan.
+
config SENSORS_CORETEMP
tristate "Intel Core/Core2/Atom temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for ITE IT8705F, IT8712F,
- IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the
- SiS960 clone.
+ IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
+ chips, and the SiS960 clone.
This driver can also be built as a module. If so, the module
will be called it87.
config SENSORS_LM70
tristate "National Semiconductor LM70 / Texas Instruments TMP121"
- depends on SPI_MASTER && EXPERIMENTAL
+ depends on SPI_MASTER
help
If you say yes here you get support for the National Semiconductor
LM70 and Texas Instruments TMP121/TMP123 digital temperature
config SENSORS_LM80
tristate "National Semiconductor LM80"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
If you say yes here you get support for National Semiconductor
LM80 sensor chips.
config SENSORS_LM85
tristate "National Semiconductor LM85 and compatibles"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM85
- sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
+ sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
+ EMC6D101 and EMC6D102.
This driver can also be built as a module. If so, the module
will be called lm85.
If you say yes here you get support for National Semiconductor LM90,
LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
- MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
- sensor chips.
+ MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
+ W83L771W/G/AWG/ASG sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
This driver can also be built as a module. If so, the module will
be called ltc4245.
+config SENSORS_LTC4261
+ tristate "Linear Technology LTC4261"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4261
+ Negative Voltage Hot Swap Controller I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4261.
+
config SENSORS_LM95241
tristate "National Semiconductor LM95241 sensor chip"
depends on I2C
config SENSORS_PC87427
tristate "National Semiconductor PC87427"
- depends on EXPERIMENTAL
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC87427 Super-I/O chip.
will be called sht15.
config SENSORS_S3C
- tristate "S3C24XX/S3C64XX Inbuilt ADC"
- depends on ARCH_S3C2410
+ tristate "Samsung built-in ADC"
+ depends on S3C_ADC
help
If you say yes here you get support for the on-board ADCs of
- the Samsung S3C24XX or S3C64XX series of SoC
+ the Samsung S3C24XX, S3C64XX and other series of SoC
This driver can also be built as a module. If so, the module
- will be called s3c-hwmo.
+ will be called s3c-hwmon.
config SENSORS_S3C_RAW
bool "Include raw channel attributes in sysfs"
config SENSORS_SMSC47M192
tristate "SMSC LPC47M192 and compatibles"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for the temperature and
config SENSORS_THMC50
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
If you say yes here you get support for Texas Instruments THMC50
sensor chips and clones: the Analog Devices ADM1022.
config SENSORS_VT1211
tristate "VIA VT1211"
- depends on EXPERIMENTAL
select HWMON_VID
help
If you say yes here then you get support for hardware monitoring
config SENSORS_W83792D
tristate "Winbond W83792D"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
If you say yes here you get support for the Winbond W83792D chip.
This driver can also be built as a module. If so, the module
will be called w83793.
+config SENSORS_W83795
+ tristate "Winbond/Nuvoton W83795G/ADG"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83795G and
+ W83795ADG hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83795.
+
+config SENSORS_W83795_FANCTRL
+ boolean "Include fan control support (DANGEROUS)"
+ depends on SENSORS_W83795 && EXPERIMENTAL
+ default n
+ help
+ If you say yes here, support for the both manual and automatic
+ fan control features will be included in the driver.
+
+ This part of the code wasn't carefully reviewed and tested yet,
+ so enabling this option is strongly discouraged on production
+ servers. Only developers and testers should enable it for the
+ time being.
+
+ Please also note that this option will create sysfs attribute
+ files which may change in the future, so you shouldn't rely
+ on them being stable.
+
config SENSORS_W83L785TS
tristate "Winbond W83L785TS-S"
depends on I2C && EXPERIMENTAL
This driver provides support for the Ultra45 workstation environmental
sensors.
-config SENSORS_HDAPS
- tristate "IBM Hard Drive Active Protection System (hdaps)"
- depends on INPUT && X86
- select INPUT_POLLDEV
- default n
- help
- This driver provides support for the IBM Hard Drive Active Protection
- System (hdaps), which provides an accelerometer and other misc. data.
- ThinkPads starting with the R50, T41, and X40 are supported. The
- accelerometer data is readable via sysfs.
-
- This driver also provides an absolute input class device, allowing
- the laptop to act as a pinball machine-esque joystick.
-
- If your ThinkPad is not recognized by the driver, please update to latest
- BIOS. This is especially the case for some R52 ThinkPads.
-
- Say Y here if you have an applicable laptop and want to experience
- the awesome power of hdaps.
-
config SENSORS_LIS3_SPI
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
depends on !ACPI && SPI_MASTER && INPUT
projects / mv-sheeva.git / blobdiff