--- /dev/null
+/*
+ * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver.
+ * Chip is combined proximity and ambient light sensor.
+ *
+ * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/i2c/bh1770glc.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/slab.h>
+
+#define BH1770_ALS_CONTROL 0x80 /* ALS operation mode control */
+#define BH1770_PS_CONTROL 0x81 /* PS operation mode control */
+#define BH1770_I_LED 0x82 /* active LED and LED1, LED2 current */
+#define BH1770_I_LED3 0x83 /* LED3 current setting */
+#define BH1770_ALS_PS_MEAS 0x84 /* Forced mode trigger */
+#define BH1770_PS_MEAS_RATE 0x85 /* PS meas. rate at stand alone mode */
+#define BH1770_ALS_MEAS_RATE 0x86 /* ALS meas. rate at stand alone mode */
+#define BH1770_PART_ID 0x8a /* Part number and revision ID */
+#define BH1770_MANUFACT_ID 0x8b /* Manufacturerer ID */
+#define BH1770_ALS_DATA_0 0x8c /* ALS DATA low byte */
+#define BH1770_ALS_DATA_1 0x8d /* ALS DATA high byte */
+#define BH1770_ALS_PS_STATUS 0x8e /* Measurement data and int status */
+#define BH1770_PS_DATA_LED1 0x8f /* PS data from LED1 */
+#define BH1770_PS_DATA_LED2 0x90 /* PS data from LED2 */
+#define BH1770_PS_DATA_LED3 0x91 /* PS data from LED3 */
+#define BH1770_INTERRUPT 0x92 /* Interrupt setting */
+#define BH1770_PS_TH_LED1 0x93 /* PS interrupt threshold for LED1 */
+#define BH1770_PS_TH_LED2 0x94 /* PS interrupt threshold for LED2 */
+#define BH1770_PS_TH_LED3 0x95 /* PS interrupt threshold for LED3 */
+#define BH1770_ALS_TH_UP_0 0x96 /* ALS upper threshold low byte */
+#define BH1770_ALS_TH_UP_1 0x97 /* ALS upper threshold high byte */
+#define BH1770_ALS_TH_LOW_0 0x98 /* ALS lower threshold low byte */
+#define BH1770_ALS_TH_LOW_1 0x99 /* ALS lower threshold high byte */
+
+/* MANUFACT_ID */
+#define BH1770_MANUFACT_ROHM 0x01
+#define BH1770_MANUFACT_OSRAM 0x03
+
+/* PART_ID */
+#define BH1770_PART 0x90
+#define BH1770_PART_MASK 0xf0
+#define BH1770_REV_MASK 0x0f
+#define BH1770_REV_SHIFT 0
+#define BH1770_REV_0 0x00
+#define BH1770_REV_1 0x01
+
+/* Operating modes for both */
+#define BH1770_STANDBY 0x00
+#define BH1770_FORCED 0x02
+#define BH1770_STANDALONE 0x03
+#define BH1770_SWRESET (0x01 << 2)
+
+#define BH1770_PS_TRIG_MEAS (1 << 0)
+#define BH1770_ALS_TRIG_MEAS (1 << 1)
+
+/* Interrupt control */
+#define BH1770_INT_OUTPUT_MODE (1 << 3) /* 0 = latched */
+#define BH1770_INT_POLARITY (1 << 2) /* 1 = active high */
+#define BH1770_INT_ALS_ENA (1 << 1)
+#define BH1770_INT_PS_ENA (1 << 0)
+
+/* Interrupt status */
+#define BH1770_INT_LED1_DATA (1 << 0)
+#define BH1770_INT_LED1_INT (1 << 1)
+#define BH1770_INT_LED2_DATA (1 << 2)
+#define BH1770_INT_LED2_INT (1 << 3)
+#define BH1770_INT_LED3_DATA (1 << 4)
+#define BH1770_INT_LED3_INT (1 << 5)
+#define BH1770_INT_LEDS_INT ((1 << 1) | (1 << 3) | (1 << 5))
+#define BH1770_INT_ALS_DATA (1 << 6)
+#define BH1770_INT_ALS_INT (1 << 7)
+
+/* Led channels */
+#define BH1770_LED1 0x00
+
+#define BH1770_DISABLE 0
+#define BH1770_ENABLE 1
+#define BH1770_PROX_CHANNELS 1
+
+#define BH1770_LUX_DEFAULT_RATE 1 /* Index to lux rate table */
+#define BH1770_PROX_DEFAULT_RATE 1 /* Direct HW value =~ 50Hz */
+#define BH1770_PROX_DEF_RATE_THRESH 6 /* Direct HW value =~ 5 Hz */
+#define BH1770_STARTUP_DELAY 50
+#define BH1770_RESET_TIME 10
+#define BH1770_TIMEOUT 2100 /* Timeout in 2.1 seconds */
+
+#define BH1770_LUX_RANGE 65535
+#define BH1770_PROX_RANGE 255
+#define BH1770_COEF_SCALER 1024
+#define BH1770_CALIB_SCALER 8192
+#define BH1770_LUX_NEUTRAL_CALIB_VALUE (1 * BH1770_CALIB_SCALER)
+#define BH1770_LUX_DEF_THRES 1000
+#define BH1770_PROX_DEF_THRES 70
+#define BH1770_PROX_DEF_ABS_THRES 100
+#define BH1770_DEFAULT_PERSISTENCE 10
+#define BH1770_PROX_MAX_PERSISTENCE 50
+#define BH1770_LUX_GA_SCALE 16384
+#define BH1770_LUX_CF_SCALE 2048 /* CF ChipFactor */
+#define BH1770_NEUTRAL_CF BH1770_LUX_CF_SCALE
+#define BH1770_LUX_CORR_SCALE 4096
+
+#define PROX_ABOVE_THRESHOLD 1
+#define PROX_BELOW_THRESHOLD 0
+
+#define PROX_IGNORE_LUX_LIMIT 500
+
+struct bh1770_chip {
+ struct bh1770_platform_data *pdata;
+ char chipname[10];
+ u8 revision;
+ struct i2c_client *client;
+ struct regulator_bulk_data regs[2];
+ struct mutex mutex; /* avoid parallel access */
+ wait_queue_head_t wait;
+
+ bool int_mode_prox;
+ bool int_mode_lux;
+ struct delayed_work prox_work;
+ u32 lux_cf; /* Chip specific factor */
+ u32 lux_ga;
+ u32 lux_calib;
+ int lux_rate_index;
+ u32 lux_corr;
+ u16 lux_data_raw;
+ u16 lux_threshold_hi;
+ u16 lux_threshold_lo;
+ u16 lux_thres_hi_onchip;
+ u16 lux_thres_lo_onchip;
+ bool lux_wait_result;
+
+ int prox_enable_count;
+ u16 prox_coef;
+ u16 prox_const;
+ int prox_rate;
+ int prox_rate_threshold;
+ u8 prox_persistence;
+ u8 prox_persistence_counter;
+ u8 prox_data;
+ u8 prox_threshold;
+ u8 prox_threshold_hw;
+ bool prox_force_update;
+ u8 prox_abs_thres;
+ u8 prox_led;
+};
+
+static const char reg_vcc[] = "Vcc";
+static const char reg_vleds[] = "Vleds";
+
+/*
+ * Supported stand alone rates in ms from chip data sheet
+ * {10, 20, 30, 40, 70, 100, 200, 500, 1000, 2000};
+ */
+static const s16 prox_rates_hz[] = {100, 50, 33, 25, 14, 10, 5, 2};
+static const s16 prox_rates_ms[] = {10, 20, 30, 40, 70, 100, 200, 500};
+
+/* Supported IR-led currents in mA */
+static const u8 prox_curr_ma[] = {5, 10, 20, 50, 100, 150, 200};
+
+/*
+ * Supported stand alone rates in ms from chip data sheet
+ * {100, 200, 500, 1000, 2000};
+ */
+static const s16 lux_rates_hz[] = {10, 5, 2, 1, 0};
+
+/*
+ * interrupt control functions are called while keeping chip->mutex
+ * excluding module probe / remove
+ */
+static inline int bh1770_lux_interrupt_control(struct bh1770_chip *chip,
+ int lux)
+{
+ chip->int_mode_lux = lux;
+ /* Set interrupt modes, interrupt active low, latched */
+ return i2c_smbus_write_byte_data(chip->client,
+ BH1770_INTERRUPT,
+ (lux << 1) | chip->int_mode_prox);
+}
+
+static inline int bh1770_prox_interrupt_control(struct bh1770_chip *chip,
+ int ps)
+{
+ chip->int_mode_prox = ps;
+ return i2c_smbus_write_byte_data(chip->client,
+ BH1770_INTERRUPT,
+ (chip->int_mode_lux << 1) | (ps << 0));
+}
+
+/* chip->mutex is always kept here */
+static int bh1770_lux_rate(struct bh1770_chip *chip, int rate_index)
+{
+ /* sysfs may call this when the chip is powered off */
+ if (pm_runtime_suspended(&chip->client->dev))
+ return 0;
+
+ /* Proper proximity response needs fastest lux rate (100ms) */
+ if (chip->prox_enable_count)
+ rate_index = 0;
+
+ return i2c_smbus_write_byte_data(chip->client,
+ BH1770_ALS_MEAS_RATE,
+ rate_index);
+}
+
+static int bh1770_prox_rate(struct bh1770_chip *chip, int mode)
+{
+ int rate;
+
+ rate = (mode == PROX_ABOVE_THRESHOLD) ?
+ chip->prox_rate_threshold : chip->prox_rate;
+
+ return i2c_smbus_write_byte_data(chip->client,
+ BH1770_PS_MEAS_RATE,
+ rate);
+}
+
+/* InfraredLED is controlled by the chip during proximity scanning */
+static inline int bh1770_led_cfg(struct bh1770_chip *chip)
+{
+ /* LED cfg, current for leds 1 and 2 */
+ return i2c_smbus_write_byte_data(chip->client,
+ BH1770_I_LED,
+ (BH1770_LED1 << 6) |
+ (BH1770_LED_5mA << 3) |
+ chip->prox_led);
+}
+
+/*
+ * Following two functions converts raw ps values from HW to normalized
+ * values. Purpose is to compensate differences between different sensor
+ * versions and variants so that result means about the same between
+ * versions.
+ */
+static inline u8 bh1770_psraw_to_adjusted(struct bh1770_chip *chip, u8 psraw)
+{
+ u16 adjusted;
+ adjusted = (u16)(((u32)(psraw + chip->prox_const) * chip->prox_coef) /
+ BH1770_COEF_SCALER);
+ if (adjusted > BH1770_PROX_RANGE)
+ adjusted = BH1770_PROX_RANGE;
+ return adjusted;
+}
+
+static inline u8 bh1770_psadjusted_to_raw(struct bh1770_chip *chip, u8 ps)
+{
+ u16 raw;
+
+ raw = (((u32)ps * BH1770_COEF_SCALER) / chip->prox_coef);
+ if (raw > chip->prox_const)
+ raw = raw - chip->prox_const;
+ else
+ raw = 0;
+ return raw;
+}
+
+/*
+ * Following two functions converts raw lux values from HW to normalized
+ * values. Purpose is to compensate differences between different sensor
+ * versions and variants so that result means about the same between
+ * versions. Chip->mutex is kept when this is called.
+ */
+static int bh1770_prox_set_threshold(struct bh1770_chip *chip)
+{
+ u8 tmp = 0;
+
+ /* sysfs may call this when the chip is powered off */
+ if (pm_runtime_suspended(&chip->client->dev))
+ return 0;
+
+ tmp = bh1770_psadjusted_to_raw(chip, chip->prox_threshold);
+ chip->prox_threshold_hw = tmp;
+
+ return i2c_smbus_write_byte_data(chip->client, BH1770_PS_TH_LED1,
+ tmp);
+}
+
+static inline u16 bh1770_lux_raw_to_adjusted(struct bh1770_chip *chip, u16 raw)
+{
+ u32 lux;
+ lux = ((u32)raw * chip->lux_corr) / BH1770_LUX_CORR_SCALE;
+ return min(lux, (u32)BH1770_LUX_RANGE);
+}
+
+static inline u16 bh1770_lux_adjusted_to_raw(struct bh1770_chip *chip,
+ u16 adjusted)
+{
+ return (u32)adjusted * BH1770_LUX_CORR_SCALE / chip->lux_corr;
+}
+
+/* chip->mutex is kept when this is called */
+static int bh1770_lux_update_thresholds(struct bh1770_chip *chip,
+ u16 threshold_hi, u16 threshold_lo)
+{
+ u8 data[4];
+ int ret;
+
+ /* sysfs may call this when the chip is powered off */
+ if (pm_runtime_suspended(&chip->client->dev))
+ return 0;
+
+ /*
+ * Compensate threshold values with the correction factors if not
+ * set to minimum or maximum.
+ * Min & max values disables interrupts.
+ */
+ if (threshold_hi != BH1770_LUX_RANGE && threshold_hi != 0)
+ threshold_hi = bh1770_lux_adjusted_to_raw(chip, threshold_hi);
+
+ if (threshold_lo != BH1770_LUX_RANGE && threshold_lo != 0)
+ threshold_lo = bh1770_lux_adjusted_to_raw(chip, threshold_lo);
+
+ if (chip->lux_thres_hi_onchip == threshold_hi &&
+ chip->lux_thres_lo_onchip == threshold_lo)
+ return 0;
+
+ chip->lux_thres_hi_onchip = threshold_hi;
+ chip->lux_thres_lo_onchip = threshold_lo;
+
+ data[0] = threshold_hi;
+ data[1] = threshold_hi >> 8;
+ data[2] = threshold_lo;
+ data[3] = threshold_lo >> 8;
+
+ ret = i2c_smbus_write_i2c_block_data(chip->client,
+ BH1770_ALS_TH_UP_0,
+ ARRAY_SIZE(data),
+ data);
+ return ret;
+}
+
+static int bh1770_lux_get_result(struct bh1770_chip *chip)
+{
+ u16 data;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_0);
+ if (ret < 0)
+ return ret;
+
+ data = ret & 0xff;
+ ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_1);
+ if (ret < 0)
+ return ret;
+
+ chip->lux_data_raw = data | ((ret & 0xff) << 8);
+
+ return 0;
+}
+
+/* Calculate correction value which contains chip and device specific parts */
+static u32 bh1770_get_corr_value(struct bh1770_chip *chip)
+{
+ u32 tmp;
+ /* Impact of glass attenuation correction */
+ tmp = (BH1770_LUX_CORR_SCALE * chip->lux_ga) / BH1770_LUX_GA_SCALE;
+ /* Impact of chip factor correction */
+ tmp = (tmp * chip->lux_cf) / BH1770_LUX_CF_SCALE;
+ /* Impact of Device specific calibration correction */
+ tmp = (tmp * chip->lux_calib) / BH1770_CALIB_SCALER;
+ return tmp;
+}
+
+static int bh1770_lux_read_result(struct bh1770_chip *chip)
+{
+ bh1770_lux_get_result(chip);
+ return bh1770_lux_raw_to_adjusted(chip, chip->lux_data_raw);
+}
+
+/*
+ * Chip on / off functions are called while keeping mutex except probe
+ * or remove phase
+ */
+static int bh1770_chip_on(struct bh1770_chip *chip)
+{
+ int ret = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
+ chip->regs);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2);
+
+ /* Reset the chip */
+ i2c_smbus_write_byte_data(chip->client, BH1770_ALS_CONTROL,
+ BH1770_SWRESET);
+ usleep_range(BH1770_RESET_TIME, BH1770_RESET_TIME * 2);
+
+ /*
+ * ALS is started always since proximity needs als results
+ * for realibility estimation.
+ * Let's assume dark until the first ALS measurement is ready.
+ */
+ chip->lux_data_raw = 0;
+ chip->prox_data = 0;
+ ret = i2c_smbus_write_byte_data(chip->client,
+ BH1770_ALS_CONTROL, BH1770_STANDALONE);
+
+ /* Assume reset defaults */
+ chip->lux_thres_hi_onchip = BH1770_LUX_RANGE;
+ chip->lux_thres_lo_onchip = 0;
+
+ return ret;
+}
+
+static void bh1770_chip_off(struct bh1770_chip *chip)
+{
+ i2c_smbus_write_byte_data(chip->client,
+ BH1770_INTERRUPT, BH1770_DISABLE);
+ i2c_smbus_write_byte_data(chip->client,
+ BH1770_ALS_CONTROL, BH1770_STANDBY);
+ i2c_smbus_write_byte_data(chip->client,
+ BH1770_PS_CONTROL, BH1770_STANDBY);
+ regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
+}
+
+/* chip->mutex is kept when this is called */
+static int bh1770_prox_mode_control(struct bh1770_chip *chip)
+{
+ if (chip->prox_enable_count) {
+ chip->prox_force_update = true; /* Force immediate update */
+
+ bh1770_lux_rate(chip, chip->lux_rate_index);
+ bh1770_prox_set_threshold(chip);
+ bh1770_led_cfg(chip);
+ bh1770_prox_rate(chip, PROX_BELOW_THRESHOLD);
+ bh1770_prox_interrupt_control(chip, BH1770_ENABLE);
+ i2c_smbus_write_byte_data(chip->client,
+ BH1770_PS_CONTROL, BH1770_STANDALONE);
+ } else {
+ chip->prox_data = 0;
+ bh1770_lux_rate(chip, chip->lux_rate_index);
+ bh1770_prox_interrupt_control(chip, BH1770_DISABLE);
+ i2c_smbus_write_byte_data(chip->client,
+ BH1770_PS_CONTROL, BH1770_STANDBY);
+ }
+ return 0;
+}
+
+/* chip->mutex is kept when this is called */
+static int bh1770_prox_read_result(struct bh1770_chip *chip)
+{
+ int ret;
+ bool above;
+ u8 mode;
+
+ ret = i2c_smbus_read_byte_data(chip->client, BH1770_PS_DATA_LED1);
+ if (ret < 0)
+ goto out;
+
+ if (ret > chip->prox_threshold_hw)
+ above = true;
+ else
+ above = false;
+
+ /*
+ * when ALS levels goes above limit, proximity result may be
+ * false proximity. Thus ignore the result. With real proximity
+ * there is a shadow causing low als levels.
+ */
+ if (chip->lux_data_raw > PROX_IGNORE_LUX_LIMIT)
+ ret = 0;
+
+ chip->prox_data = bh1770_psraw_to_adjusted(chip, ret);
+
+ /* Strong proximity level or force mode requires immediate response */
+ if (chip->prox_data >= chip->prox_abs_thres ||
+ chip->prox_force_update)
+ chip->prox_persistence_counter = chip->prox_persistence;
+
+ chip->prox_force_update = false;
+
+ /* Persistence filttering to reduce false proximity events */
+ if (likely(above)) {
+ if (chip->prox_persistence_counter < chip->prox_persistence) {
+ chip->prox_persistence_counter++;
+ ret = -ENODATA;
+ } else {
+ mode = PROX_ABOVE_THRESHOLD;
+ ret = 0;
+ }
+ } else {
+ chip->prox_persistence_counter = 0;
+ mode = PROX_BELOW_THRESHOLD;
+ chip->prox_data = 0;
+ ret = 0;
+ }
+
+ /* Set proximity detection rate based on above or below value */
+ if (ret == 0) {
+ bh1770_prox_rate(chip, mode);
+ sysfs_notify(&chip->client->dev.kobj, NULL, "prox0_raw");
+ }
+out:
+ return ret;
+}
+
+static int bh1770_detect(struct bh1770_chip *chip)
+{
+ struct i2c_client *client = chip->client;
+ s32 ret;
+ u8 manu, part;
+
+ ret = i2c_smbus_read_byte_data(client, BH1770_MANUFACT_ID);
+ if (ret < 0)
+ goto error;
+ manu = (u8)ret;
+
+ ret = i2c_smbus_read_byte_data(client, BH1770_PART_ID);
+ if (ret < 0)
+ goto error;
+ part = (u8)ret;
+
+ chip->revision = (part & BH1770_REV_MASK) >> BH1770_REV_SHIFT;
+ chip->prox_coef = BH1770_COEF_SCALER;
+ chip->prox_const = 0;
+ chip->lux_cf = BH1770_NEUTRAL_CF;
+
+ if ((manu == BH1770_MANUFACT_ROHM) &&
+ ((part & BH1770_PART_MASK) == BH1770_PART)) {
+ snprintf(chip->chipname, sizeof(chip->chipname), "BH1770GLC");
+ return 0;
+ }
+
+ if ((manu == BH1770_MANUFACT_OSRAM) &&
+ ((part & BH1770_PART_MASK) == BH1770_PART)) {
+ snprintf(chip->chipname, sizeof(chip->chipname), "SFH7770");
+ /* Values selected by comparing different versions */
+ chip->prox_coef = 819; /* 0.8 * BH1770_COEF_SCALER */
+ chip->prox_const = 40;
+ return 0;
+ }
+
+ ret = -ENODEV;
+error:
+ dev_dbg(&client->dev, "BH1770 or SFH7770 not found\n");
+
+ return ret;
+}
+
+/*
+ * This work is re-scheduled at every proximity interrupt.
+ * If this work is running, it means that there hasn't been any
+ * proximity interrupt in time. Situation is handled as no-proximity.
+ * It would be nice to have low-threshold interrupt or interrupt
+ * when measurement and hi-threshold are both 0. But neither of those exists.
+ * This is a workaroud for missing HW feature.
+ */
+
+static void bh1770_prox_work(struct work_struct *work)
+{
+ struct bh1770_chip *chip =
+ container_of(work, struct bh1770_chip, prox_work.work);
+
+ mutex_lock(&chip->mutex);
+ bh1770_prox_read_result(chip);
+ mutex_unlock(&chip->mutex);
+}
+
+/* This is threaded irq handler */
+static irqreturn_t bh1770_irq(int irq, void *data)
+{
+ struct bh1770_chip *chip = data;
+ int status;
+ int rate = 0;
+
+ mutex_lock(&chip->mutex);
+ status = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_PS_STATUS);
+
+ /* Acknowledge interrupt by reading this register */
+ i2c_smbus_read_byte_data(chip->client, BH1770_INTERRUPT);
+
+ /*
+ * Check if there is fresh data available for als.
+ * If this is the very first data, update thresholds after that.
+ */
+ if (status & BH1770_INT_ALS_DATA) {
+ bh1770_lux_get_result(chip);
+ if (unlikely(chip->lux_wait_result)) {
+ chip->lux_wait_result = false;
+ wake_up(&chip->wait);
+ bh1770_lux_update_thresholds(chip,
+ chip->lux_threshold_hi,
+ chip->lux_threshold_lo);
+ }
+ }
+
+ /* Disable interrupt logic to guarantee acknowledgement */
+ i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT,
+ (0 << 1) | (0 << 0));
+
+ if ((status & BH1770_INT_ALS_INT))
+ sysfs_notify(&chip->client->dev.kobj, NULL, "lux0_input");
+
+ if (chip->int_mode_prox && (status & BH1770_INT_LEDS_INT)) {
+ rate = prox_rates_ms[chip->prox_rate_threshold];
+ bh1770_prox_read_result(chip);
+ }
+
+ /* Re-enable interrupt logic */
+ i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT,
+ (chip->int_mode_lux << 1) |
+ (chip->int_mode_prox << 0));
+ mutex_unlock(&chip->mutex);
+
+ /*
+ * Can't cancel work while keeping mutex since the work uses the
+ * same mutex.
+ */
+ if (rate) {
+ /*
+ * Simulate missing no-proximity interrupt 50ms after the
+ * next expected interrupt time.
+ */
+ cancel_delayed_work_sync(&chip->prox_work);
+ schedule_delayed_work(&chip->prox_work,
+ msecs_to_jiffies(rate + 50));
+ }
+ return IRQ_HANDLED;
+}
+
+static ssize_t bh1770_power_state_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+ ssize_t ret;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ if (value) {
+ pm_runtime_get_sync(dev);
+
+ ret = bh1770_lux_rate(chip, chip->lux_rate_index);
+ if (ret < 0) {
+ pm_runtime_put(dev);
+ goto leave;
+ }
+
+ ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
+ if (ret < 0) {
+ pm_runtime_put(dev);
+ goto leave;
+ }
+
+ /* This causes interrupt after the next measurement cycle */
+ bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES,
+ BH1770_LUX_DEF_THRES);
+ /* Inform that we are waiting for a result from ALS */
+ chip->lux_wait_result = true;
+ bh1770_prox_mode_control(chip);
+ } else if (!pm_runtime_suspended(dev)) {
+ pm_runtime_put(dev);
+ }
+ ret = count;
+leave:
+ mutex_unlock(&chip->mutex);
+ return ret;
+}
+
+static ssize_t bh1770_power_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", !pm_runtime_suspended(dev));
+}
+
+static ssize_t bh1770_lux_result_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ ssize_t ret;
+ long timeout;
+
+ if (pm_runtime_suspended(dev))
+ return -EIO; /* Chip is not enabled at all */
+
+ timeout = wait_event_interruptible_timeout(chip->wait,
+ !chip->lux_wait_result,
+ msecs_to_jiffies(BH1770_TIMEOUT));
+ if (!timeout)
+ return -EIO;
+
+ mutex_lock(&chip->mutex);
+ ret = sprintf(buf, "%d\n", bh1770_lux_read_result(chip));
+ mutex_unlock(&chip->mutex);
+
+ return ret;
+}
+
+static ssize_t bh1770_lux_range_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", BH1770_LUX_RANGE);
+}
+
+static ssize_t bh1770_prox_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ /* Assume no proximity. Sensor will tell real state soon */
+ if (!chip->prox_enable_count)
+ chip->prox_data = 0;
+
+ if (value)
+ chip->prox_enable_count++;
+ else if (chip->prox_enable_count > 0)
+ chip->prox_enable_count--;
+ else
+ goto leave;
+
+ /* Run control only when chip is powered on */
+ if (!pm_runtime_suspended(dev))
+ bh1770_prox_mode_control(chip);
+leave:
+ mutex_unlock(&chip->mutex);
+ return count;
+}
+
+static ssize_t bh1770_prox_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ ssize_t len;
+
+ mutex_lock(&chip->mutex);
+ len = sprintf(buf, "%d\n", chip->prox_enable_count);
+ mutex_unlock(&chip->mutex);
+ return len;
+}
+
+static ssize_t bh1770_prox_result_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ mutex_lock(&chip->mutex);
+ if (chip->prox_enable_count && !pm_runtime_suspended(dev))
+ ret = sprintf(buf, "%d\n", chip->prox_data);
+ else
+ ret = -EIO;
+ mutex_unlock(&chip->mutex);
+ return ret;
+}
+
+static ssize_t bh1770_prox_range_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", BH1770_PROX_RANGE);
+}
+
+static ssize_t bh1770_get_prox_rate_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int i;
+ int pos = 0;
+ for (i = 0; i < ARRAY_SIZE(prox_rates_hz); i++)
+ pos += sprintf(buf + pos, "%d ", prox_rates_hz[i]);
+ sprintf(buf + pos - 1, "\n");
+ return pos;
+}
+
+static ssize_t bh1770_get_prox_rate_above(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate_threshold]);
+}
+
+static ssize_t bh1770_get_prox_rate_below(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate]);
+}
+
+static int bh1770_prox_rate_validate(int rate)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(prox_rates_hz) - 1; i++)
+ if (rate >= prox_rates_hz[i])
+ break;
+ return i;
+}
+
+static ssize_t bh1770_set_prox_rate_above(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ chip->prox_rate_threshold = bh1770_prox_rate_validate(value);
+ mutex_unlock(&chip->mutex);
+ return count;
+}
+
+static ssize_t bh1770_set_prox_rate_below(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ chip->prox_rate = bh1770_prox_rate_validate(value);
+ mutex_unlock(&chip->mutex);
+ return count;
+}
+
+static ssize_t bh1770_get_prox_thres(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", chip->prox_threshold);
+}
+
+static ssize_t bh1770_set_prox_thres(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+ int ret;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+ if (value > BH1770_PROX_RANGE)
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ chip->prox_threshold = value;
+ ret = bh1770_prox_set_threshold(chip);
+ mutex_unlock(&chip->mutex);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static ssize_t bh1770_prox_persistence_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", chip->prox_persistence);
+}
+
+static ssize_t bh1770_prox_persistence_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value > BH1770_PROX_MAX_PERSISTENCE)
+ return -EINVAL;
+
+ chip->prox_persistence = value;
+
+ return len;
+}
+
+static ssize_t bh1770_prox_abs_thres_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%u\n", chip->prox_abs_thres);
+}
+
+static ssize_t bh1770_prox_abs_thres_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value > BH1770_PROX_RANGE)
+ return -EINVAL;
+
+ chip->prox_abs_thres = value;
+
+ return len;
+}
+
+static ssize_t bh1770_chip_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%s rev %d\n", chip->chipname, chip->revision);
+}
+
+static ssize_t bh1770_lux_calib_default_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", BH1770_CALIB_SCALER);
+}
+
+static ssize_t bh1770_lux_calib_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ ssize_t len;
+
+ mutex_lock(&chip->mutex);
+ len = sprintf(buf, "%u\n", chip->lux_calib);
+ mutex_unlock(&chip->mutex);
+ return len;
+}
+
+static ssize_t bh1770_lux_calib_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+ u32 old_calib;
+ u32 new_corr;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ old_calib = chip->lux_calib;
+ chip->lux_calib = value;
+ new_corr = bh1770_get_corr_value(chip);
+ if (new_corr == 0) {
+ chip->lux_calib = old_calib;
+ mutex_unlock(&chip->mutex);
+ return -EINVAL;
+ }
+ chip->lux_corr = new_corr;
+ /* Refresh thresholds on HW after changing correction value */
+ bh1770_lux_update_thresholds(chip, chip->lux_threshold_hi,
+ chip->lux_threshold_lo);
+
+ mutex_unlock(&chip->mutex);
+
+ return len;
+}
+
+static ssize_t bh1770_get_lux_rate_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int i;
+ int pos = 0;
+ for (i = 0; i < ARRAY_SIZE(lux_rates_hz); i++)
+ pos += sprintf(buf + pos, "%d ", lux_rates_hz[i]);
+ sprintf(buf + pos - 1, "\n");
+ return pos;
+}
+
+static ssize_t bh1770_get_lux_rate(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", lux_rates_hz[chip->lux_rate_index]);
+}
+
+static ssize_t bh1770_set_lux_rate(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ unsigned long rate_hz;
+ int ret, i;
+
+ if (strict_strtoul(buf, 0, &rate_hz))
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(lux_rates_hz) - 1; i++)
+ if (rate_hz >= lux_rates_hz[i])
+ break;
+
+ mutex_lock(&chip->mutex);
+ chip->lux_rate_index = i;
+ ret = bh1770_lux_rate(chip, i);
+ mutex_unlock(&chip->mutex);
+
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t bh1770_get_lux_thresh_above(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", chip->lux_threshold_hi);
+}
+
+static ssize_t bh1770_get_lux_thresh_below(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", chip->lux_threshold_lo);
+}
+
+static ssize_t bh1770_set_lux_thresh(struct bh1770_chip *chip, u16 *target,
+ const char *buf)
+{
+ int ret = 0;
+ unsigned long thresh;
+
+ if (strict_strtoul(buf, 0, &thresh))
+ return -EINVAL;
+
+ if (thresh > BH1770_LUX_RANGE)
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ *target = thresh;
+ /*
+ * Don't update values in HW if we are still waiting for
+ * first interrupt to come after device handle open call.
+ */
+ if (!chip->lux_wait_result)
+ ret = bh1770_lux_update_thresholds(chip,
+ chip->lux_threshold_hi,
+ chip->lux_threshold_lo);
+ mutex_unlock(&chip->mutex);
+ return ret;
+
+}
+
+static ssize_t bh1770_set_lux_thresh_above(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_hi, buf);
+ if (ret < 0)
+ return ret;
+ return len;
+}
+
+static ssize_t bh1770_set_lux_thresh_below(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct bh1770_chip *chip = dev_get_drvdata(dev);
+ int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_lo, buf);
+ if (ret < 0)
+ return ret;
+ return len;
+}
+
+static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, bh1770_prox_enable_show,
+ bh1770_prox_enable_store);
+static DEVICE_ATTR(prox0_thresh_above1_value, S_IRUGO | S_IWUSR,
+ bh1770_prox_abs_thres_show,
+ bh1770_prox_abs_thres_store);
+static DEVICE_ATTR(prox0_thresh_above0_value, S_IRUGO | S_IWUSR,
+ bh1770_get_prox_thres,
+ bh1770_set_prox_thres);
+static DEVICE_ATTR(prox0_raw, S_IRUGO, bh1770_prox_result_show, NULL);
+static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, bh1770_prox_range_show, NULL);
+static DEVICE_ATTR(prox0_thresh_above_count, S_IRUGO | S_IWUSR,
+ bh1770_prox_persistence_show,
+ bh1770_prox_persistence_store);
+static DEVICE_ATTR(prox0_rate_above, S_IRUGO | S_IWUSR,
+ bh1770_get_prox_rate_above,
+ bh1770_set_prox_rate_above);
+static DEVICE_ATTR(prox0_rate_below, S_IRUGO | S_IWUSR,
+ bh1770_get_prox_rate_below,
+ bh1770_set_prox_rate_below);
+static DEVICE_ATTR(prox0_rate_avail, S_IRUGO, bh1770_get_prox_rate_avail, NULL);
+
+static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, bh1770_lux_calib_show,
+ bh1770_lux_calib_store);
+static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO,
+ bh1770_lux_calib_default_show,
+ NULL);
+static DEVICE_ATTR(lux0_input, S_IRUGO, bh1770_lux_result_show, NULL);
+static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, bh1770_lux_range_show, NULL);
+static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, bh1770_get_lux_rate,
+ bh1770_set_lux_rate);
+static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, bh1770_get_lux_rate_avail, NULL);
+static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR,
+ bh1770_get_lux_thresh_above,
+ bh1770_set_lux_thresh_above);
+static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR,
+ bh1770_get_lux_thresh_below,
+ bh1770_set_lux_thresh_below);
+static DEVICE_ATTR(chip_id, S_IRUGO, bh1770_chip_id_show, NULL);
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, bh1770_power_state_show,
+ bh1770_power_state_store);
+
+
+static struct attribute *sysfs_attrs[] = {
+ &dev_attr_lux0_calibscale.attr,
+ &dev_attr_lux0_calibscale_default.attr,
+ &dev_attr_lux0_input.attr,
+ &dev_attr_lux0_sensor_range.attr,
+ &dev_attr_lux0_rate.attr,
+ &dev_attr_lux0_rate_avail.attr,
+ &dev_attr_lux0_thresh_above_value.attr,
+ &dev_attr_lux0_thresh_below_value.attr,
+ &dev_attr_prox0_raw.attr,
+ &dev_attr_prox0_sensor_range.attr,
+ &dev_attr_prox0_raw_en.attr,
+ &dev_attr_prox0_thresh_above_count.attr,
+ &dev_attr_prox0_rate_above.attr,
+ &dev_attr_prox0_rate_below.attr,
+ &dev_attr_prox0_rate_avail.attr,
+ &dev_attr_prox0_thresh_above0_value.attr,
+ &dev_attr_prox0_thresh_above1_value.attr,
+ &dev_attr_chip_id.attr,
+ &dev_attr_power_state.attr,
+ NULL
+};
+
+static struct attribute_group bh1770_attribute_group = {
+ .attrs = sysfs_attrs
+};
+
+static int __devinit bh1770_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bh1770_chip *chip;
+ int err;
+
+ chip = kzalloc(sizeof *chip, GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+ chip->client = client;
+
+ mutex_init(&chip->mutex);
+ init_waitqueue_head(&chip->wait);
+ INIT_DELAYED_WORK(&chip->prox_work, bh1770_prox_work);
+
+ if (client->dev.platform_data == NULL) {
+ dev_err(&client->dev, "platform data is mandatory\n");
+ err = -EINVAL;
+ goto fail1;
+ }
+
+ chip->pdata = client->dev.platform_data;
+ chip->lux_calib = BH1770_LUX_NEUTRAL_CALIB_VALUE;
+ chip->lux_rate_index = BH1770_LUX_DEFAULT_RATE;
+ chip->lux_threshold_lo = BH1770_LUX_DEF_THRES;
+ chip->lux_threshold_hi = BH1770_LUX_DEF_THRES;
+
+ if (chip->pdata->glass_attenuation == 0)
+ chip->lux_ga = BH1770_NEUTRAL_GA;
+ else
+ chip->lux_ga = chip->pdata->glass_attenuation;
+
+ chip->prox_threshold = BH1770_PROX_DEF_THRES;
+ chip->prox_led = chip->pdata->led_def_curr;
+ chip->prox_abs_thres = BH1770_PROX_DEF_ABS_THRES;
+ chip->prox_persistence = BH1770_DEFAULT_PERSISTENCE;
+ chip->prox_rate_threshold = BH1770_PROX_DEF_RATE_THRESH;
+ chip->prox_rate = BH1770_PROX_DEFAULT_RATE;
+ chip->prox_data = 0;
+
+ chip->regs[0].supply = reg_vcc;
+ chip->regs[1].supply = reg_vleds;
+
+ err = regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(chip->regs), chip->regs);
+ if (err < 0) {
+ dev_err(&client->dev, "Cannot get regulators\n");
+ goto fail1;
+ }
+
+ err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
+ chip->regs);
+ if (err < 0) {
+ dev_err(&client->dev, "Cannot enable regulators\n");
+ goto fail2;
+ }
+
+ usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2);
+ err = bh1770_detect(chip);
+ if (err < 0)
+ goto fail3;
+
+ /* Start chip */
+ bh1770_chip_on(chip);
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+
+ chip->lux_corr = bh1770_get_corr_value(chip);
+ if (chip->lux_corr == 0) {
+ dev_err(&client->dev, "Improper correction values\n");
+ err = -EINVAL;
+ goto fail3;
+ }
+
+ if (chip->pdata->setup_resources) {
+ err = chip->pdata->setup_resources();
+ if (err) {
+ err = -EINVAL;
+ goto fail3;
+ }
+ }
+
+ err = sysfs_create_group(&chip->client->dev.kobj,
+ &bh1770_attribute_group);
+ if (err < 0) {
+ dev_err(&chip->client->dev, "Sysfs registration failed\n");
+ goto fail4;
+ }
+
+ /*
+ * Chip needs level triggered interrupt to work. However,
+ * level triggering doesn't work always correctly with power
+ * management. Select both
+ */
+ err = request_threaded_irq(client->irq, NULL,
+ bh1770_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
+ IRQF_TRIGGER_LOW,
+ "bh1770", chip);
+ if (err) {
+ dev_err(&client->dev, "could not get IRQ %d\n",
+ client->irq);
+ goto fail5;
+ }
+ regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
+ return err;
+fail5:
+ sysfs_remove_group(&chip->client->dev.kobj,
+ &bh1770_attribute_group);
+fail4:
+ if (chip->pdata->release_resources)
+ chip->pdata->release_resources();
+fail3:
+ regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
+fail2:
+ regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs);
+fail1:
+ kfree(chip);
+ return err;
+}
+
+static int __devexit bh1770_remove(struct i2c_client *client)
+{
+ struct bh1770_chip *chip = i2c_get_clientdata(client);
+
+ free_irq(client->irq, chip);
+
+ sysfs_remove_group(&chip->client->dev.kobj,
+ &bh1770_attribute_group);
+
+ if (chip->pdata->release_resources)
+ chip->pdata->release_resources();
+
+ cancel_delayed_work_sync(&chip->prox_work);
+
+ if (!pm_runtime_suspended(&client->dev))
+ bh1770_chip_off(chip);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
+ regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs);
+ kfree(chip);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bh1770_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct bh1770_chip *chip = i2c_get_clientdata(client);
+
+ bh1770_chip_off(chip);
+
+ return 0;
+}
+
+static int bh1770_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct bh1770_chip *chip = i2c_get_clientdata(client);
+ int ret = 0;
+
+ bh1770_chip_on(chip);
+
+ if (!pm_runtime_suspended(dev)) {
+ /*
+ * If we were enabled at suspend time, it is expected
+ * everything works nice and smoothly
+ */
+ ret = bh1770_lux_rate(chip, chip->lux_rate_index);
+ ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
+
+ /* This causes interrupt after the next measurement cycle */
+ bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES,
+ BH1770_LUX_DEF_THRES);
+ /* Inform that we are waiting for a result from ALS */
+ chip->lux_wait_result = true;
+ bh1770_prox_mode_control(chip);
+ }
+ return ret;
+}
+
+#else
+#define bh1770_suspend NULL
+#define bh1770_shutdown NULL
+#define bh1770_resume NULL
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int bh1770_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct bh1770_chip *chip = i2c_get_clientdata(client);
+
+ bh1770_chip_off(chip);
+
+ return 0;
+}
+
+static int bh1770_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct bh1770_chip *chip = i2c_get_clientdata(client);
+
+ bh1770_chip_on(chip);
+
+ return 0;
+}
+#endif
+
+static const struct i2c_device_id bh1770_id[] = {
+ {"bh1770glc", 0 },
+ {"sfh7770", 0 },
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, bh1770_id);
+
+static const struct dev_pm_ops bh1770_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(bh1770_suspend, bh1770_resume)
+ SET_RUNTIME_PM_OPS(bh1770_runtime_suspend, bh1770_runtime_resume, NULL)
+};
+
+static struct i2c_driver bh1770_driver = {
+ .driver = {
+ .name = "bh1770glc",
+ .owner = THIS_MODULE,
+ .pm = &bh1770_pm_ops,
+ },
+ .probe = bh1770_probe,
+ .remove = __devexit_p(bh1770_remove),
+ .id_table = bh1770_id,
+};
+
+static int __init bh1770_init(void)
+{
+ return i2c_add_driver(&bh1770_driver);
+}
+
+static void __exit bh1770_exit(void)
+{
+ i2c_del_driver(&bh1770_driver);
+}
+
+MODULE_DESCRIPTION("BH1770GLC / SFH7770 combined ALS and proximity sensor");
+MODULE_AUTHOR("Samu Onkalo, Nokia Corporation");
+MODULE_LICENSE("GPL v2");
+
+module_init(bh1770_init);
+module_exit(bh1770_exit);
projects / mv-sheeva.git / blobdiff