Merge branch 'master' into csb1725

[mv-sheeva.git] / drivers / net / pcmcia / com20020_cs.c

diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 3c400cfa82ae2e88c0e67c3f0582f75491be925e..27bfad76fc4077bdaa74187a79c2f0beb53c4ffc 100644 (file)
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -43,7 +43,6 @@
 #include <linux/arcdevice.h>
 #include <linux/com20020.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -52,23 +51,23 @@
 
 #define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
 
-#ifdef DEBUG
 
 static void regdump(struct net_device *dev)
 {
+#ifdef DEBUG
     int ioaddr = dev->base_addr;
     int count;
     
-    printk("com20020 register dump:\n");
+    netdev_dbg(dev, "register dump:\n");
     for (count = ioaddr; count < ioaddr + 16; count++)
     {
        if (!(count % 16))
-           printk("\n%04X: ", count);
-       printk("%02X ", inb(count));
+           pr_cont("%04X:", count);
+       pr_cont(" %02X", inb(count));
     }
-    printk("\n");
+    pr_cont("\n");
     
-    printk("buffer0 dump:\n");
+    netdev_dbg(dev, "buffer0 dump:\n");
        /* set up the address register */
         count = 0;
        outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
@@ -77,19 +76,15 @@ static void regdump(struct net_device *dev)
     for (count = 0; count < 256+32; count++)
     {
        if (!(count % 16))
-           printk("\n%04X: ", count);
+           pr_cont("%04X:", count);
        
        /* copy the data */
-       printk("%02X ", inb(_MEMDATA));
+       pr_cont(" %02X", inb(_MEMDATA));
     }
-    printk("\n");
+    pr_cont("\n");
+#endif
 }
 
-#else
-
-static inline void regdump(struct net_device *dev) { }
-
-#endif
 
 
 /*====================================================================*/
@@ -123,14 +118,6 @@ typedef struct com20020_dev_t {
     struct net_device       *dev;
 } com20020_dev_t;
 
-/*======================================================================
-
-    com20020_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
 static int com20020_probe(struct pcmcia_device *p_dev)
 {
     com20020_dev_t *info;
@@ -160,8 +147,7 @@ static int com20020_probe(struct pcmcia_device *p_dev)
 
     p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
     p_dev->resource[0]->end = 16;
-    p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-    p_dev->conf.IntType = INT_MEMORY_AND_IO;
+    p_dev->config_flags |= CONF_ENABLE_IRQ;
 
     info->dev = dev;
     p_dev->priv = info;
@@ -174,15 +160,6 @@ fail_alloc_info:
     return -ENOMEM;
 } /* com20020_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void com20020_detach(struct pcmcia_device *link)
 {
     struct com20020_dev_t *info = link->priv;
@@ -221,14 +198,6 @@ static void com20020_detach(struct pcmcia_device *link)
 
 } /* com20020_detach */
 
-/*======================================================================
-
-    com20020_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-
-======================================================================*/
-
 static int com20020_config(struct pcmcia_device *link)
 {
     struct arcnet_local *lp;
@@ -282,7 +251,7 @@ static int com20020_config(struct pcmcia_device *link)
 
     dev->irq = link->irq;
 
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
            goto failed;
 
@@ -301,13 +270,13 @@ static int com20020_config(struct pcmcia_device *link)
     i = com20020_found(dev, 0);        /* calls register_netdev */
     
     if (i != 0) {
-       dev_printk(KERN_NOTICE, &link->dev,
-               "com20020_cs: com20020_found() failed\n");
+       dev_notice(&link->dev,
+                  "com20020_found() failed\n");
        goto failed;
     }
 
-    dev_dbg(&link->dev,KERN_INFO "%s: port %#3lx, irq %d\n",
-           dev->name, dev->base_addr, dev->irq);
+    netdev_dbg(dev, "port %#3lx, irq %d\n",
+              dev->base_addr, dev->irq);
     return 0;
 
 failed:
@@ -316,14 +285,6 @@ failed:
     return -ENODEV;
 } /* com20020_config */
 
-/*======================================================================
-
-    After a card is removed, com20020_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void com20020_release(struct pcmcia_device *link)
 {
        dev_dbg(&link->dev, "com20020_release\n");
@@ -366,9 +327,7 @@ MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
 
 static struct pcmcia_driver com20020_cs_driver = {
        .owner          = THIS_MODULE,
-       .drv            = {
-               .name   = "com20020_cs",
-       },
+       .name           = "com20020_cs",
        .probe          = com20020_probe,
        .remove         = com20020_detach,
        .id_table       = com20020_ids,