return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
}
+/* On some ST platforms, some HW system configuraton registers have to be
+ * set according to the link speed negotiated.
+ */
+static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
+{
+ struct phy_device *phydev = priv->phydev;
+
+ if (likely(priv->plat->fix_mac_speed))
+ priv->plat->fix_mac_speed(priv->plat->bsp_priv,
+ phydev->speed);
+}
+
/**
* stmmac_adjust_link
* @dev: net device structure
new_state = 1;
switch (phydev->speed) {
case 1000:
- if (likely(priv->is_gmac))
+ if (likely(priv->plat->has_gmac))
ctrl &= ~priv->hw->link.port;
- if (likely(priv->fix_mac_speed))
- priv->fix_mac_speed(priv->bsp_priv,
- phydev->speed);
+ stmmac_hw_fix_mac_speed(priv);
break;
case 100:
case 10:
- if (priv->is_gmac) {
+ if (priv->plat->has_gmac) {
ctrl |= priv->hw->link.port;
if (phydev->speed == SPEED_100) {
ctrl |= priv->hw->link.speed;
} else {
ctrl &= ~priv->hw->link.port;
}
- if (likely(priv->fix_mac_speed))
- priv->fix_mac_speed(priv->bsp_priv,
- phydev->speed);
+ stmmac_hw_fix_mac_speed(priv);
break;
default:
if (netif_msg_link(priv))
return 0;
}
- snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->plat->bus_id);
snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->phy_addr);
pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id);
*/
static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
{
- if (likely((priv->tx_coe) && (!priv->no_csum_insertion))) {
+ if (likely((priv->plat->tx_coe) && (!priv->no_csum_insertion))) {
/* In case of GMAC, SF mode has to be enabled
* to perform the TX COE. This depends on:
* 1) TX COE if actually supported
init_dma_desc_rings(dev);
/* DMA initialization and SW reset */
- if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->pbl,
+ if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->plat->pbl,
priv->dma_tx_phy,
priv->dma_rx_phy) < 0)) {
/* Copy the MAC addr into the HW */
priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
/* If required, perform hw setup of the bus. */
- if (priv->bus_setup)
- priv->bus_setup(priv->ioaddr);
+ if (priv->plat->bus_setup)
+ priv->plat->bus_setup(priv->ioaddr);
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
if (priv->rx_coe)
pr_info("stmmac: Rx Checksum Offload Engine supported\n");
- if (priv->tx_coe)
+ if (priv->plat->tx_coe)
pr_info("\tTX Checksum insertion supported\n");
- priv->shutdown = 0;
-
/* Initialise the MMC (if present) to disable all interrupts. */
writel(0xffffffff, priv->ioaddr + MMC_HIGH_INTR_MASK);
writel(0xffffffff, priv->ioaddr + MMC_LOW_INTR_MASK);
skb, skb->len);
segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
- if (unlikely(IS_ERR(segs)))
+ if (IS_ERR(segs))
goto sw_tso_end;
do {
return stmmac_sw_tso(priv, skb);
if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
- if (unlikely((!priv->tx_coe) || (priv->no_csum_insertion)))
+ if (unlikely((!priv->plat->tx_coe) ||
+ (priv->no_csum_insertion)))
skb_checksum_help(skb);
else
csum_insertion = 1;
DMA_FROM_DEVICE);
(p + entry)->des2 = priv->rx_skbuff_dma[entry];
- if (unlikely(priv->is_gmac)) {
+ if (unlikely(priv->plat->has_gmac)) {
if (bfsize >= BUF_SIZE_8KiB)
(p + entry)->des3 =
(p + entry)->des2 + BUF_SIZE_8KiB;
return -EBUSY;
}
- if (priv->is_gmac)
+ if (priv->plat->has_gmac)
max_mtu = JUMBO_LEN;
else
max_mtu = ETH_DATA_LEN;
* needs to have the Tx COE disabled for oversized frames
* (due to limited buffer sizes). In this case we disable
* the TX csum insertionin the TDES and not use SF. */
- if ((priv->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
+ if ((priv->plat->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
priv->no_csum_insertion = 1;
else
priv->no_csum_insertion = 0;
return IRQ_NONE;
}
- if (priv->is_gmac)
+ if (priv->plat->has_gmac)
/* To handle GMAC own interrupts */
priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr);
dev->netdev_ops = &stmmac_netdev_ops;
stmmac_set_ethtool_ops(dev);
- dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA);
+ dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
dev->watchdog_timeo = msecs_to_jiffies(watchdog);
#ifdef STMMAC_VLAN_TAG_USED
/* Both mac100 and gmac support receive VLAN tag detection */
DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
- (dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
+ (dev->features & NETIF_F_IP_CSUM) ? "on" : "off");
return ret;
}
struct mac_device_info *device;
- if (priv->is_gmac)
+ if (priv->plat->has_gmac)
device = dwmac1000_setup(priv->ioaddr);
else
device = dwmac100_setup(priv->ioaddr);
if (!device)
return -ENOMEM;
- if (priv->enh_desc) {
+ if (priv->plat->enh_desc) {
device->desc = &enh_desc_ops;
pr_info("\tEnhanced descriptor structure\n");
} else
priv->hw = device;
- if (device_can_wakeup(priv->device))
+ if (device_can_wakeup(priv->device)) {
priv->wolopts = WAKE_MAGIC; /* Magic Frame as default */
+ enable_irq_wake(dev->irq);
+ }
return 0;
}
plat_dat->bus_id);
/* Check that this phy is for the MAC being initialised */
- if (priv->bus_id != plat_dat->bus_id)
+ if (priv->plat->bus_id != plat_dat->bus_id)
return 0;
/* OK, this PHY is connected to the MAC.
struct resource *res;
void __iomem *addr = NULL;
struct net_device *ndev = NULL;
- struct stmmac_priv *priv;
+ struct stmmac_priv *priv = NULL;
struct plat_stmmacenet_data *plat_dat;
pr_info("STMMAC driver:\n\tplatform registration... ");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- goto out;
- }
+ if (!res)
+ return -ENODEV;
pr_info("\tdone!\n");
if (!request_mem_region(res->start, resource_size(res),
pr_err("%s: ERROR: memory allocation failed"
"cannot get the I/O addr 0x%x\n",
__func__, (unsigned int)res->start);
- ret = -EBUSY;
- goto out;
+ return -EBUSY;
}
addr = ioremap(res->start, resource_size(res));
if (!addr) {
pr_err("%s: ERROR: memory mapping failed\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_release_region;
}
ndev = alloc_etherdev(sizeof(struct stmmac_priv));
if (!ndev) {
pr_err("%s: ERROR: allocating the device\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_unmap;
}
SET_NETDEV_DEV(ndev, &pdev->dev);
if (ndev->irq == -ENXIO) {
pr_err("%s: ERROR: MAC IRQ configuration "
"information not found\n", __func__);
- ret = -ENODEV;
- goto out;
+ ret = -ENXIO;
+ goto out_free_ndev;
}
priv = netdev_priv(ndev);
priv->device = &(pdev->dev);
priv->dev = ndev;
plat_dat = pdev->dev.platform_data;
- priv->bus_id = plat_dat->bus_id;
- priv->pbl = plat_dat->pbl; /* TLI */
- priv->mii_clk_csr = plat_dat->clk_csr;
- priv->tx_coe = plat_dat->tx_coe;
- priv->bugged_jumbo = plat_dat->bugged_jumbo;
- priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */
- priv->enh_desc = plat_dat->enh_desc;
+
+ priv->plat = plat_dat;
+
priv->ioaddr = addr;
/* PMT module is not integrated in all the MAC devices. */
/* Set the I/O base addr */
ndev->base_addr = (unsigned long)addr;
- /* Verify embedded resource for the platform */
- ret = stmmac_claim_resource(pdev);
- if (ret < 0)
- goto out;
+ /* Custom initialisation */
+ if (priv->plat->init) {
+ ret = priv->plat->init(pdev);
+ if (unlikely(ret))
+ goto out_free_ndev;
+ }
/* MAC HW revice detection */
ret = stmmac_mac_device_setup(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* Network Device Registration */
ret = stmmac_probe(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* associate a PHY - it is provided by another platform bus */
if (!driver_for_each_device
stmmac_associate_phy)) {
pr_err("No PHY device is associated with this MAC!\n");
ret = -ENODEV;
- goto out;
+ goto out_unregister;
}
- priv->fix_mac_speed = plat_dat->fix_mac_speed;
- priv->bus_setup = plat_dat->bus_setup;
- priv->bsp_priv = plat_dat->bsp_priv;
-
pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
"\tIO base addr: 0x%p)\n", ndev->name, pdev->name,
pdev->id, ndev->irq, addr);
/* MDIO bus Registration */
- pr_debug("\tMDIO bus (id: %d)...", priv->bus_id);
+ pr_debug("\tMDIO bus (id: %d)...", priv->plat->bus_id);
ret = stmmac_mdio_register(ndev);
if (ret < 0)
- goto out;
+ goto out_unregister;
pr_debug("registered!\n");
+ return 0;
-out:
- if (ret < 0) {
- platform_set_drvdata(pdev, NULL);
- release_mem_region(res->start, resource_size(res));
- if (addr != NULL)
- iounmap(addr);
- }
+out_unregister:
+ unregister_netdev(ndev);
+out_plat_exit:
+ if (priv->plat->exit)
+ priv->plat->exit(pdev);
+out_free_ndev:
+ free_netdev(ndev);
+ platform_set_drvdata(pdev, NULL);
+out_unmap:
+ iounmap(addr);
+out_release_region:
+ release_mem_region(res->start, resource_size(res));
return ret;
}
stmmac_mdio_unregister(ndev);
+ if (priv->plat->exit)
+ priv->plat->exit(pdev);
+
platform_set_drvdata(pdev, NULL);
unregister_netdev(ndev);
}
#ifdef CONFIG_PM
-static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
+static int stmmac_suspend(struct device *dev)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct stmmac_priv *priv = netdev_priv(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
int dis_ic = 0;
- if (!dev || !netif_running(dev))
+ if (!ndev || !netif_running(ndev))
return 0;
spin_lock(&priv->lock);
- if (state.event == PM_EVENT_SUSPEND) {
- netif_device_detach(dev);
- netif_stop_queue(dev);
- if (priv->phydev)
- phy_stop(priv->phydev);
+ netif_device_detach(ndev);
+ netif_stop_queue(ndev);
+ if (priv->phydev)
+ phy_stop(priv->phydev);
#ifdef CONFIG_STMMAC_TIMER
- priv->tm->timer_stop();
- if (likely(priv->tm->enable))
- dis_ic = 1;
+ priv->tm->timer_stop();
+ if (likely(priv->tm->enable))
+ dis_ic = 1;
#endif
- napi_disable(&priv->napi);
-
- /* Stop TX/RX DMA */
- priv->hw->dma->stop_tx(priv->ioaddr);
- priv->hw->dma->stop_rx(priv->ioaddr);
- /* Clear the Rx/Tx descriptors */
- priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
- dis_ic);
- priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
-
- /* Enable Power down mode by programming the PMT regs */
- if (device_can_wakeup(priv->device))
- priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
- else
- stmmac_disable_mac(priv->ioaddr);
- } else {
- priv->shutdown = 1;
- /* Although this can appear slightly redundant it actually
- * makes fast the standby operation and guarantees the driver
- * working if hibernation is on media. */
- stmmac_release(dev);
- }
+ napi_disable(&priv->napi);
+
+ /* Stop TX/RX DMA */
+ priv->hw->dma->stop_tx(priv->ioaddr);
+ priv->hw->dma->stop_rx(priv->ioaddr);
+ /* Clear the Rx/Tx descriptors */
+ priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
+ dis_ic);
+ priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
+
+ /* Enable Power down mode by programming the PMT regs */
+ if (device_may_wakeup(priv->device))
+ priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
+ else
+ stmmac_disable_mac(priv->ioaddr);
spin_unlock(&priv->lock);
return 0;
}
-static int stmmac_resume(struct platform_device *pdev)
+static int stmmac_resume(struct device *dev)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct stmmac_priv *priv = netdev_priv(dev);
-
- if (!netif_running(dev))
- return 0;
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
- if (priv->shutdown) {
- /* Re-open the interface and re-init the MAC/DMA
- and the rings (i.e. on hibernation stage) */
- stmmac_open(dev);
+ if (!netif_running(ndev))
return 0;
- }
spin_lock(&priv->lock);
* is received. Anyway, it's better to manually clear
* this bit because it can generate problems while resuming
* from another devices (e.g. serial console). */
- if (device_can_wakeup(priv->device))
+ if (device_may_wakeup(priv->device))
priv->hw->mac->pmt(priv->ioaddr, 0);
- netif_device_attach(dev);
+ netif_device_attach(ndev);
/* Enable the MAC and DMA */
stmmac_enable_mac(priv->ioaddr);
priv->hw->dma->start_rx(priv->ioaddr);
#ifdef CONFIG_STMMAC_TIMER
- priv->tm->timer_start(tmrate);
+ if (likely(priv->tm->enable))
+ priv->tm->timer_start(tmrate);
#endif
napi_enable(&priv->napi);
if (priv->phydev)
phy_start(priv->phydev);
- netif_start_queue(dev);
+ netif_start_queue(ndev);
spin_unlock(&priv->lock);
return 0;
}
-#endif
-static struct platform_driver stmmac_driver = {
- .driver = {
- .name = STMMAC_RESOURCE_NAME,
- },
- .probe = stmmac_dvr_probe,
- .remove = stmmac_dvr_remove,
-#ifdef CONFIG_PM
+static int stmmac_freeze(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (!ndev || !netif_running(ndev))
+ return 0;
+
+ return stmmac_release(ndev);
+}
+
+static int stmmac_restore(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (!ndev || !netif_running(ndev))
+ return 0;
+
+ return stmmac_open(ndev);
+}
+
+static const struct dev_pm_ops stmmac_pm_ops = {
.suspend = stmmac_suspend,
.resume = stmmac_resume,
-#endif
+ .freeze = stmmac_freeze,
+ .thaw = stmmac_restore,
+ .restore = stmmac_restore,
+};
+#else
+static const struct dev_pm_ops stmmac_pm_ops;
+#endif /* CONFIG_PM */
+static struct platform_driver stmmac_driver = {
+ .probe = stmmac_dvr_probe,
+ .remove = stmmac_dvr_remove,
+ .driver = {
+ .name = STMMAC_RESOURCE_NAME,
+ .owner = THIS_MODULE,
+ .pm = &stmmac_pm_ops,
+ },
};
/**
projects / mv-sheeva.git / blobdiff