/*
- Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
/*
- * Enable RX.
+ * Enable queues.
*/
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ rt2x00queue_start_queues(rt2x00dev);
+ rt2x00link_start_tuner(rt2x00dev);
/*
* Start watchdog monitoring.
*/
rt2x00link_start_watchdog(rt2x00dev);
- /*
- * Start the TX queues.
- */
- ieee80211_wake_queues(rt2x00dev->hw);
-
return 0;
}
if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
- /*
- * Stop the TX queues in mac80211.
- */
- ieee80211_stop_queues(rt2x00dev->hw);
- rt2x00queue_stop_queues(rt2x00dev);
-
/*
* Stop watchdog monitoring.
*/
rt2x00link_stop_watchdog(rt2x00dev);
/*
- * Disable RX.
+ * Stop all queues
*/
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+ rt2x00link_stop_tuner(rt2x00dev);
+ rt2x00queue_stop_queues(rt2x00dev);
+ rt2x00queue_flush_queues(rt2x00dev, true);
/*
* Disable radio.
rt2x00leds_led_radio(rt2x00dev, false);
}
-void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
-{
- /*
- * When we are disabling the RX, we should also stop the link tuner.
- */
- if (state == STATE_RADIO_RX_OFF)
- rt2x00link_stop_tuner(rt2x00dev);
-
- rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-
- /*
- * When we are enabling the RX, we should also start the link tuner.
- */
- if (state == STATE_RADIO_RX_ON)
- rt2x00link_start_tuner(rt2x00dev);
-}
-
static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
struct rt2x00_dev *rt2x00dev = data;
struct rt2x00_intf *intf = vif_to_intf(vif);
- int delayed_flags;
-
- /*
- * Copy all data we need during this action under the protection
- * of a spinlock. Otherwise race conditions might occur which results
- * into an invalid configuration.
- */
- spin_lock(&intf->lock);
-
- delayed_flags = intf->delayed_flags;
- intf->delayed_flags = 0;
-
- spin_unlock(&intf->lock);
/*
* It is possible the radio was disabled while the work had been
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
- if (delayed_flags & DELAYED_UPDATE_BEACON)
+ if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags))
rt2x00queue_update_beacon(rt2x00dev, vif, true);
}
}
EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
+void rt2x00lib_dmastart(struct queue_entry *entry)
+{
+ set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ rt2x00queue_index_inc(entry->queue, Q_INDEX);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
+
+void rt2x00lib_dmadone(struct queue_entry *entry)
+{
+ set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
+ clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ rt2x00queue_index_inc(entry->queue, Q_INDEX_DMA_DONE);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_dmadone);
+
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
- unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+ unsigned int header_length, i;
u8 rate_idx, rate_flags, retry_rates;
u8 skbdesc_flags = skbdesc->flags;
- unsigned int i;
bool success;
/*
* Unmap the skb.
*/
- rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
+ rt2x00queue_unmap_skb(entry);
/*
* Remove the extra tx headroom from the skb.
*/
skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+ /*
+ * Determine the length of 802.11 header.
+ */
+ header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+
/*
* Remove L2 padding which was added during
*/
* through a mac80211 library call (RTS/CTS) then we should not
* send the status report back.
*/
- if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
- /*
- * Only PCI and SOC devices process the tx status in process
- * context. Hence use ieee80211_tx_status for PCI and SOC
- * devices and stick to ieee80211_tx_status_irqsafe for USB.
- */
- if (rt2x00_is_usb(rt2x00dev))
- ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
- else
+ if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
+ if (test_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags))
ieee80211_tx_status(rt2x00dev->hw, entry->skb);
- else
+ else
+ ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
+ } else
dev_kfree_skb_any(entry->skb);
/*
rt2x00dev->ops->lib->clear_entry(entry);
- clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
/*
* is reenabled when the txdone handler has finished.
*/
if (!rt2x00queue_threshold(entry->queue))
- ieee80211_wake_queue(rt2x00dev->hw, qid);
+ rt2x00queue_unpause_queue(entry->queue);
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
+void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
+{
+ struct txdone_entry_desc txdesc;
+
+ txdesc.flags = 0;
+ __set_bit(status, &txdesc.flags);
+ txdesc.retry = 0;
+
+ rt2x00lib_txdone(entry, &txdesc);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
+
static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
struct rxdone_entry_desc *rxdesc)
{
struct ieee80211_supported_band *sband;
const struct rt2x00_rate *rate;
unsigned int i;
- int signal;
- int type;
-
- /*
- * For non-HT rates the MCS value needs to contain the
- * actually used rate modulation (CCK or OFDM).
- */
- if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
- signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal);
- else
- signal = rxdesc->signal;
+ int signal = rxdesc->signal;
+ int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
- type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
-
- sband = &rt2x00dev->bands[rt2x00dev->curr_band];
- for (i = 0; i < sband->n_bitrates; i++) {
- rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
-
- if (((type == RXDONE_SIGNAL_PLCP) &&
- (rate->plcp == signal)) ||
- ((type == RXDONE_SIGNAL_BITRATE) &&
- (rate->bitrate == signal)) ||
- ((type == RXDONE_SIGNAL_MCS) &&
- (rate->mcs == signal))) {
- return i;
+ switch (rxdesc->rate_mode) {
+ case RATE_MODE_CCK:
+ case RATE_MODE_OFDM:
+ /*
+ * For non-HT rates the MCS value needs to contain the
+ * actually used rate modulation (CCK or OFDM).
+ */
+ if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
+ signal = RATE_MCS(rxdesc->rate_mode, signal);
+
+ sband = &rt2x00dev->bands[rt2x00dev->curr_band];
+ for (i = 0; i < sband->n_bitrates; i++) {
+ rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
+ if (((type == RXDONE_SIGNAL_PLCP) &&
+ (rate->plcp == signal)) ||
+ ((type == RXDONE_SIGNAL_BITRATE) &&
+ (rate->bitrate == signal)) ||
+ ((type == RXDONE_SIGNAL_MCS) &&
+ (rate->mcs == signal))) {
+ return i;
+ }
}
+ break;
+ case RATE_MODE_HT_MIX:
+ case RATE_MODE_HT_GREENFIELD:
+ if (signal >= 0 && signal <= 76)
+ return signal;
+ break;
+ default:
+ break;
}
WARNING(rt2x00dev, "Frame received with unrecognized signal, "
- "signal=0x%.4x, type=%d.\n", signal, type);
+ "mode=0x%.4x, signal=0x%.4x, type=%d.\n",
+ rxdesc->rate_mode, signal, type);
return 0;
}
-void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
- struct queue_entry *entry)
+void rt2x00lib_rxdone(struct queue_entry *entry)
{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct rxdone_entry_desc rxdesc;
struct sk_buff *skb;
- struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
+ struct ieee80211_rx_status *rx_status;
unsigned int header_length;
int rate_idx;
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+ !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ goto submit_entry;
+
+ if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ goto submit_entry;
+
/*
* Allocate a new sk_buffer. If no new buffer available, drop the
* received frame and reuse the existing buffer.
*/
- skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry);
+ skb = rt2x00queue_alloc_rxskb(entry);
if (!skb)
- return;
+ goto submit_entry;
/*
* Unmap the skb.
*/
- rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
+ rt2x00queue_unmap_skb(entry);
/*
* Extract the RXD details.
skb_trim(entry->skb, rxdesc.size);
/*
- * Check if the frame was received using HT. In that case,
- * the rate is the MCS index and should be passed to mac80211
- * directly. Otherwise we need to translate the signal to
- * the correct bitrate index.
+ * Translate the signal to the correct bitrate index.
*/
- if (rxdesc.rate_mode == RATE_MODE_CCK ||
- rxdesc.rate_mode == RATE_MODE_OFDM) {
- rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
- } else {
+ rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
+ if (rxdesc.rate_mode == RATE_MODE_HT_MIX ||
+ rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD)
rxdesc.flags |= RX_FLAG_HT;
- rate_idx = rxdesc.signal;
- }
/*
* Update extra components
*/
rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
+ /*
+ * Initialize RX status information, and send frame
+ * to mac80211.
+ */
+ rx_status = IEEE80211_SKB_RXCB(entry->skb);
rx_status->mactime = rxdesc.timestamp;
+ rx_status->band = rt2x00dev->curr_band;
+ rx_status->freq = rt2x00dev->curr_freq;
rx_status->rate_idx = rate_idx;
rx_status->signal = rxdesc.rssi;
rx_status->flag = rxdesc.flags;
rx_status->antenna = rt2x00dev->link.ant.active.rx;
- /*
- * Send frame to mac80211 & debugfs.
- * mac80211 will clean up the skb structure.
- */
- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
- memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
-
- /*
- * Currently only PCI and SOC devices handle rx interrupts in process
- * context. Hence, use ieee80211_rx_irqsafe for USB and ieee80211_rx_ni
- * for PCI and SOC devices.
- */
- if (rt2x00_is_usb(rt2x00dev))
- ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
- else
- ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
+ ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
/*
* Replace the skb with the freshly allocated one.
*/
entry->skb = skb;
- entry->flags = 0;
- rt2x00dev->ops->lib->clear_entry(entry);
-
- rt2x00queue_index_inc(entry->queue, Q_INDEX);
+submit_entry:
+ entry->flags = 0;
+ rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+ test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ rt2x00dev->ops->lib->clear_entry(entry);
}
EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
{
entry->flags = 0;
entry->bitrate = rate->bitrate;
- entry->hw_value =index;
+ entry->hw_value = index;
entry->hw_value_short = index;
if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
for (i = 0; i < spec->num_channels; i++) {
rt2x00lib_channel(&channels[i],
spec->channels[i].channel,
- spec->channels_info[i].tx_power1, i);
+ spec->channels_info[i].max_power, i);
}
/*
else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
+ /*
+ * Allocate tx status FIFO for driver use.
+ */
+ if (test_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags)) {
+ /*
+ * Allocate txstatus fifo and tasklet, we use a size of 512
+ * for the kfifo which is big enough to store 512/4=128 tx
+ * status reports. In the worst case (tx status for all tx
+ * queues gets reported before we've got a chance to handle
+ * them) 24*4=384 tx status reports need to be cached.
+ */
+ status = kfifo_alloc(&rt2x00dev->txstatus_fifo, 512,
+ GFP_KERNEL);
+ if (status)
+ return status;
+
+ /* tasklet for processing the tx status reports. */
+ if (rt2x00dev->ops->lib->txstatus_tasklet)
+ tasklet_init(&rt2x00dev->txstatus_tasklet,
+ rt2x00dev->ops->lib->txstatus_tasklet,
+ (unsigned long)rt2x00dev);
+
+ }
+
/*
* Register HW.
*/
/* Enable the radio */
retval = rt2x00lib_enable_radio(rt2x00dev);
- if (retval) {
- rt2x00queue_uninitialize(rt2x00dev);
+ if (retval)
return retval;
- }
set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
* Stop all work.
*/
cancel_work_sync(&rt2x00dev->intf_work);
+ cancel_work_sync(&rt2x00dev->rxdone_work);
+ cancel_work_sync(&rt2x00dev->txdone_work);
+
+ /*
+ * Free the tx status fifo.
+ */
+ kfifo_free(&rt2x00dev->txstatus_fifo);
+
+ /*
+ * Kill the tx status tasklet.
+ */
+ tasklet_kill(&rt2x00dev->txstatus_tasklet);
/*
* Uninitialize device.
projects / mv-sheeva.git / blobdiff