static struct kmem_cache *ctx_cachep;
int ql2xlogintimeout = 20;
-module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
+module_param(ql2xlogintimeout, int, S_IRUGO);
MODULE_PARM_DESC(ql2xlogintimeout,
"Login timeout value in seconds.");
int qlport_down_retry;
-module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
+module_param(qlport_down_retry, int, S_IRUGO);
MODULE_PARM_DESC(qlport_down_retry,
"Maximum number of command retries to a port that returns "
"a PORT-DOWN status.");
"Default is 0 - no PLOGI. 1 - perfom PLOGI.");
int ql2xloginretrycount = 0;
-module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
+module_param(ql2xloginretrycount, int, S_IRUGO);
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
int ql2xallocfwdump = 1;
-module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
+module_param(ql2xallocfwdump, int, S_IRUGO);
MODULE_PARM_DESC(ql2xallocfwdump,
"Option to enable allocation of memory for a firmware dump "
"during HBA initialization. Memory allocation requirements "
"Default is 0 - no logging. 1 - log errors.");
int ql2xshiftctondsd = 6;
-module_param(ql2xshiftctondsd, int, S_IRUGO|S_IRUSR);
+module_param(ql2xshiftctondsd, int, S_IRUGO);
MODULE_PARM_DESC(ql2xshiftctondsd,
"Set to control shifting of command type processing "
"based on total number of SG elements.");
static void qla2x00_free_device(scsi_qla_host_t *);
int ql2xfdmienable=1;
-module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xfdmienable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xfdmienable,
"Enables FDMI registrations. "
"0 - no FDMI. Default is 1 - perform FDMI.");
" Default is 0 - Error isolation disabled, 1 - Enable it");
int ql2xiidmaenable=1;
-module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xiidmaenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xiidmaenable,
"Enables iIDMA settings "
"Default is 1 - perform iIDMA. 0 - no iIDMA.");
int ql2xmaxqueues = 1;
-module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR);
+module_param(ql2xmaxqueues, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmaxqueues,
"Enables MQ settings "
"Default is 1 for single queue. Set it to number "
"of queues in MQ mode.");
int ql2xmultique_tag;
-module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
+module_param(ql2xmultique_tag, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmultique_tag,
"Enables CPU affinity settings for the driver "
"Default is 0 for no affinity of request and response IO. "
"Set it to 1 to turn on the cpu affinity.");
int ql2xfwloadbin;
-module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
+module_param(ql2xfwloadbin, int, S_IRUGO);
MODULE_PARM_DESC(ql2xfwloadbin,
"Option to specify location from which to load ISP firmware:\n"
" 2 -- load firmware via the request_firmware() (hotplug)\n"
" 0 -- use default semantics.\n");
int ql2xetsenable;
-module_param(ql2xetsenable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xetsenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xetsenable,
"Enables firmware ETS burst."
"Default is 0 - skip ETS enablement.");
int ql2xdbwr = 1;
-module_param(ql2xdbwr, int, S_IRUGO|S_IRUSR);
+module_param(ql2xdbwr, int, S_IRUGO);
MODULE_PARM_DESC(ql2xdbwr,
"Option to specify scheme for request queue posting\n"
" 0 -- Regular doorbell.\n"
" 1 -- CAMRAM doorbell (faster).\n");
-int ql2xdontresethba;
-module_param(ql2xdontresethba, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(ql2xdontresethba,
- "Option to specify reset behaviour\n"
- " 0 (Default) -- Reset on failure.\n"
- " 1 -- Do not reset on failure.\n");
-
int ql2xtargetreset = 1;
-module_param(ql2xtargetreset, int, S_IRUGO|S_IRUSR);
+module_param(ql2xtargetreset, int, S_IRUGO);
MODULE_PARM_DESC(ql2xtargetreset,
"Enable target reset."
"Default is 1 - use hw defaults.");
int ql2xgffidenable;
-module_param(ql2xgffidenable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xgffidenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xgffidenable,
"Enables GFF_ID checks of port type. "
"Default is 0 - Do not use GFF_ID information.");
int ql2xasynctmfenable;
-module_param(ql2xasynctmfenable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xasynctmfenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xasynctmfenable,
"Enables issue of TM IOCBs asynchronously via IOCB mechanism"
"Default is 0 - Issue TM IOCBs via mailbox mechanism.");
}
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
- atomic_read(&fcport->state) == FCS_DEVICE_LOST ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
list_for_each_entry(vha, &ha->vp_list, list) {
atomic_inc(&vha->vref_count);
- if (vha && vha->fc_vport) {
+ if (vha->fc_vport) {
spin_unlock_irqrestore(&ha->vport_slock, flags);
fc_vport_terminate(vha->fc_vport);
{
struct fc_rport *rport;
scsi_qla_host_t *base_vha;
+ unsigned long flags;
if (!fcport->rport)
return;
rport = fcport->rport;
if (defer) {
base_vha = pci_get_drvdata(vha->hw->pdev);
- spin_lock_irq(vha->host->host_lock);
+ spin_lock_irqsave(vha->host->host_lock, flags);
fcport->drport = rport;
- spin_unlock_irq(vha->host->host_lock);
+ spin_unlock_irqrestore(vha->host->host_lock, flags);
set_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
qla2xxx_wake_dpc(base_vha);
} else
set_user_nice(current, -20);
+ set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
- set_current_state(TASK_INTERRUPTIBLE);
schedule();
__set_current_state(TASK_RUNNING);
clear_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
}
+ if (test_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags)) {
+ DEBUG(printk(KERN_INFO "scsi(%ld): dpc: sched "
+ "qla2x00_quiesce_needed ha = %p\n",
+ base_vha->host_no, ha));
+ qla82xx_device_state_handler(base_vha);
+ clear_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags);
+ if (!ha->flags.quiesce_owner) {
+ qla2x00_perform_loop_resync(base_vha);
+
+ qla82xx_idc_lock(ha);
+ qla82xx_clear_qsnt_ready(base_vha);
+ qla82xx_idc_unlock(ha);
+ }
+ }
+
if (test_and_clear_bit(RESET_MARKER_NEEDED,
&base_vha->dpc_flags) &&
(!(test_and_set_bit(RESET_ACTIVE, &base_vha->dpc_flags)))) {
qla2x00_do_dpc_all_vps(base_vha);
ha->dpc_active = 0;
+ set_current_state(TASK_INTERRUPTIBLE);
} /* End of while(1) */
+ __set_current_state(TASK_RUNNING);
DEBUG(printk("scsi(%ld): DPC handler exiting\n", base_vha->host_no));
return;
}
- if (IS_QLA82XX(ha))
- qla82xx_watchdog(vha);
-
/* Hardware read to raise pending EEH errors during mailbox waits. */
if (!pci_channel_offline(ha->pdev))
pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
+ if (IS_QLA82XX(ha)) {
+ if (test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags))
+ start_dpc++;
+ qla82xx_watchdog(vha);
+ }
+
/* Loop down handler. */
if (atomic_read(&vha->loop_down_timer) > 0 &&
!(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
projects / mv-sheeva.git / blobdiff