--- /dev/null
+//------------------------------------------------------------------------------
+// <copyright file="dsetid.h" company="Atheros">
+// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved.
+//
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// Author(s): ="Atheros"
+//==============================================================================
+
+
+#ifndef __DSETID_H__
+#define __DSETID_H__
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+/* Well-known DataSet IDs */
+#define DSETID_UNUSED 0x00000000
+#define DSETID_BOARD_DATA 0x00000001 /* Cal and board data */
+#define DSETID_REGDB 0x00000002 /* Regulatory Database */
+#define DSETID_POWER_CONTROL 0x00000003 /* TX Pwr Lim & Ant Gain */
+#define DSETID_USER_CONFIG 0x00000004 /* User Configuration */
+
+#define DSETID_ANALOG_CONTROL_DATA_START 0x00000005
+#define DSETID_ANALOG_CONTROL_DATA_END 0x00000025
+/*
+ * Get DSETID for various reference clock speeds.
+ * For each speed there are three DataSets that correspond
+ * to the three columns of bank6 data (addr, 11a, 11b/g).
+ * This macro returns the dsetid of the first of those
+ * three DataSets.
+ */
+#define ANALOG_CONTROL_DATA_DSETID(refclk) \
+ (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk)
+
+/*
+ * There are TWO STARTUP_PATCH DataSets.
+ * DSETID_STARTUP_PATCH is historical, and was applied before BMI on
+ * earlier systems. On AR6002, it is applied after BMI, just like
+ * DSETID_STARTUP_PATCH2.
+ */
+#define DSETID_STARTUP_PATCH 0x00000026
+#define DSETID_GPIO_CONFIG_PATCH 0x00000027
+#define DSETID_WLANREGS 0x00000028 /* override wlan regs */
+#define DSETID_STARTUP_PATCH2 0x00000029
+
+#define DSETID_WOW_CONFIG 0x00000090 /* WoW Configuration */
+
+/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */
+#define DSETID_INI_DATA 0x00000100
+/* Reserved for WHAL INI Tables: 0x100..0x11f */
+#define DSETID_INI_DATA_END 0x0000011f
+
+#define DSETID_VENDOR_START 0x00010000 /* Vendor-defined DataSets */
+
+#define DSETID_INDEX_END 0xfffffffe /* Reserved to indicate the
+ end of a memory-based
+ DataSet Index */
+#define DSETID_INDEX_FREE 0xffffffff /* An unused index entry */
+
+/*
+ * PATCH DataSet format:
+ * A list of patches, terminated by a patch with
+ * address=PATCH_END.
+ *
+ * This allows for patches to be stored in flash.
+ */
+PREPACK struct patch_s {
+ A_UINT32 *address;
+ A_UINT32 data;
+} POSTPACK ;
+
+/*
+ * Skip some patches. Can be used to erase a single patch in a
+ * patch DataSet without having to re-write the DataSet. May
+ * also be used to embed information for use by subsequent
+ * patch code. The "data" in a PATCH_SKIP tells how many
+ * bytes of length "patch_s" to skip.
+ */
+#define PATCH_SKIP ((A_UINT32 *)0x00000000)
+
+/*
+ * Execute code at the address specified by "data".
+ * The address of the patch structure is passed as
+ * the one parameter.
+ */
+#define PATCH_CODE_ABS ((A_UINT32 *)0x00000001)
+
+/*
+ * Same as PATCH_CODE_ABS, but treat "data" as an
+ * offset from the start of the patch word.
+ */
+#define PATCH_CODE_REL ((A_UINT32 *)0x00000002)
+
+/* Mark the end of this patch DataSet. */
+#define PATCH_END ((A_UINT32 *)0xffffffff)
+
+/*
+ * A DataSet which contains a Binary Patch to some other DataSet
+ * uses the original dsetid with the DSETID_BPATCH_FLAG bit set.
+ * Such a BPatch DataSet consists of BPatch metadata followed by
+ * the bdiff bytes. BPatch metadata consists of a single 32-bit
+ * word that contains the size of the BPatched final image.
+ *
+ * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff
+ * to create "diffs":
+ * bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs
+ * Then add BPatch metadata to the start of "diffs".
+ *
+ * NB: There are some implementation-induced restrictions
+ * on which DataSets can be BPatched.
+ */
+#define DSETID_BPATCH_FLAG 0x80000000
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#endif /* __DSETID_H__ */
projects / mv-sheeva.git / blobdiff