--- /dev/null
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _SBCHIPC_H
+#define _SBCHIPC_H
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define _PADLINE(line) pad ## line
+#define _XSTR(line) _PADLINE(line)
+#define PAD _XSTR(__LINE__)
+#endif /* PAD */
+
+typedef volatile struct {
+ u32 chipid; /* 0x0 */
+ u32 capabilities;
+ u32 corecontrol; /* corerev >= 1 */
+ u32 bist;
+
+ /* OTP */
+ u32 otpstatus; /* 0x10, corerev >= 10 */
+ u32 otpcontrol;
+ u32 otpprog;
+ u32 otplayout; /* corerev >= 23 */
+
+ /* Interrupt control */
+ u32 intstatus; /* 0x20 */
+ u32 intmask;
+
+ /* Chip specific regs */
+ u32 chipcontrol; /* 0x28, rev >= 11 */
+ u32 chipstatus; /* 0x2c, rev >= 11 */
+
+ /* Jtag Master */
+ u32 jtagcmd; /* 0x30, rev >= 10 */
+ u32 jtagir;
+ u32 jtagdr;
+ u32 jtagctrl;
+
+ /* serial flash interface registers */
+ u32 flashcontrol; /* 0x40 */
+ u32 flashaddress;
+ u32 flashdata;
+ u32 PAD[1];
+
+ /* Silicon backplane configuration broadcast control */
+ u32 broadcastaddress; /* 0x50 */
+ u32 broadcastdata;
+
+ /* gpio - cleared only by power-on-reset */
+ u32 gpiopullup; /* 0x58, corerev >= 20 */
+ u32 gpiopulldown; /* 0x5c, corerev >= 20 */
+ u32 gpioin; /* 0x60 */
+ u32 gpioout; /* 0x64 */
+ u32 gpioouten; /* 0x68 */
+ u32 gpiocontrol; /* 0x6C */
+ u32 gpiointpolarity; /* 0x70 */
+ u32 gpiointmask; /* 0x74 */
+
+ /* GPIO events corerev >= 11 */
+ u32 gpioevent;
+ u32 gpioeventintmask;
+
+ /* Watchdog timer */
+ u32 watchdog; /* 0x80 */
+
+ /* GPIO events corerev >= 11 */
+ u32 gpioeventintpolarity;
+
+ /* GPIO based LED powersave registers corerev >= 16 */
+ u32 gpiotimerval; /* 0x88 */
+ u32 gpiotimeroutmask;
+
+ /* clock control */
+ u32 clockcontrol_n; /* 0x90 */
+ u32 clockcontrol_sb; /* aka m0 */
+ u32 clockcontrol_pci; /* aka m1 */
+ u32 clockcontrol_m2; /* mii/uart/mipsref */
+ u32 clockcontrol_m3; /* cpu */
+ u32 clkdiv; /* corerev >= 3 */
+ u32 gpiodebugsel; /* corerev >= 28 */
+ u32 capabilities_ext; /* 0xac */
+
+ /* pll delay registers (corerev >= 4) */
+ u32 pll_on_delay; /* 0xb0 */
+ u32 fref_sel_delay;
+ u32 slow_clk_ctl; /* 5 < corerev < 10 */
+ u32 PAD;
+
+ /* Instaclock registers (corerev >= 10) */
+ u32 system_clk_ctl; /* 0xc0 */
+ u32 clkstatestretch;
+ u32 PAD[2];
+
+ /* Indirect backplane access (corerev >= 22) */
+ u32 bp_addrlow; /* 0xd0 */
+ u32 bp_addrhigh;
+ u32 bp_data;
+ u32 PAD;
+ u32 bp_indaccess;
+ u32 PAD[3];
+
+ /* More clock dividers (corerev >= 32) */
+ u32 clkdiv2;
+ u32 PAD[2];
+
+ /* In AI chips, pointer to erom */
+ u32 eromptr; /* 0xfc */
+
+ /* ExtBus control registers (corerev >= 3) */
+ u32 pcmcia_config; /* 0x100 */
+ u32 pcmcia_memwait;
+ u32 pcmcia_attrwait;
+ u32 pcmcia_iowait;
+ u32 ide_config;
+ u32 ide_memwait;
+ u32 ide_attrwait;
+ u32 ide_iowait;
+ u32 prog_config;
+ u32 prog_waitcount;
+ u32 flash_config;
+ u32 flash_waitcount;
+ u32 SECI_config; /* 0x130 SECI configuration */
+ u32 PAD[3];
+
+ /* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */
+ u32 eci_output; /* 0x140 */
+ u32 eci_control;
+ u32 eci_inputlo;
+ u32 eci_inputmi;
+ u32 eci_inputhi;
+ u32 eci_inputintpolaritylo;
+ u32 eci_inputintpolaritymi;
+ u32 eci_inputintpolarityhi;
+ u32 eci_intmasklo;
+ u32 eci_intmaskmi;
+ u32 eci_intmaskhi;
+ u32 eci_eventlo;
+ u32 eci_eventmi;
+ u32 eci_eventhi;
+ u32 eci_eventmasklo;
+ u32 eci_eventmaskmi;
+ u32 eci_eventmaskhi;
+ u32 PAD[3];
+
+ /* SROM interface (corerev >= 32) */
+ u32 sromcontrol; /* 0x190 */
+ u32 sromaddress;
+ u32 sromdata;
+ u32 PAD[17];
+
+ /* Clock control and hardware workarounds (corerev >= 20) */
+ u32 clk_ctl_st; /* 0x1e0 */
+ u32 hw_war;
+ u32 PAD[70];
+
+ /* UARTs */
+ u8 uart0data; /* 0x300 */
+ u8 uart0imr;
+ u8 uart0fcr;
+ u8 uart0lcr;
+ u8 uart0mcr;
+ u8 uart0lsr;
+ u8 uart0msr;
+ u8 uart0scratch;
+ u8 PAD[248]; /* corerev >= 1 */
+
+ u8 uart1data; /* 0x400 */
+ u8 uart1imr;
+ u8 uart1fcr;
+ u8 uart1lcr;
+ u8 uart1mcr;
+ u8 uart1lsr;
+ u8 uart1msr;
+ u8 uart1scratch;
+ u32 PAD[126];
+
+ /* PMU registers (corerev >= 20) */
+ u32 pmucontrol; /* 0x600 */
+ u32 pmucapabilities;
+ u32 pmustatus;
+ u32 res_state;
+ u32 res_pending;
+ u32 pmutimer;
+ u32 min_res_mask;
+ u32 max_res_mask;
+ u32 res_table_sel;
+ u32 res_dep_mask;
+ u32 res_updn_timer;
+ u32 res_timer;
+ u32 clkstretch;
+ u32 pmuwatchdog;
+ u32 gpiosel; /* 0x638, rev >= 1 */
+ u32 gpioenable; /* 0x63c, rev >= 1 */
+ u32 res_req_timer_sel;
+ u32 res_req_timer;
+ u32 res_req_mask;
+ u32 PAD;
+ u32 chipcontrol_addr; /* 0x650 */
+ u32 chipcontrol_data; /* 0x654 */
+ u32 regcontrol_addr;
+ u32 regcontrol_data;
+ u32 pllcontrol_addr;
+ u32 pllcontrol_data;
+ u32 pmustrapopt; /* 0x668, corerev >= 28 */
+ u32 pmu_xtalfreq; /* 0x66C, pmurev >= 10 */
+ u32 PAD[100];
+ u16 sromotp[768];
+} chipcregs_t;
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+#if defined(IL_BIGENDIAN) && defined(BCMHND74K)
+/* Selective swapped defines for those registers we need in
+ * big-endian code.
+ */
+#define CC_CHIPID 4
+#define CC_CAPABILITIES 0
+#define CC_CHIPST 0x28
+#define CC_EROMPTR 0xf8
+
+#else /* !IL_BIGENDIAN || !BCMHND74K */
+
+#define CC_CHIPID 0
+#define CC_CAPABILITIES 4
+#define CC_CHIPST 0x2c
+#define CC_EROMPTR 0xfc
+
+#endif /* IL_BIGENDIAN && BCMHND74K */
+
+#define CC_OTPST 0x10
+#define CC_JTAGCMD 0x30
+#define CC_JTAGIR 0x34
+#define CC_JTAGDR 0x38
+#define CC_JTAGCTRL 0x3c
+#define CC_GPIOPU 0x58
+#define CC_GPIOPD 0x5c
+#define CC_GPIOIN 0x60
+#define CC_GPIOOUT 0x64
+#define CC_GPIOOUTEN 0x68
+#define CC_GPIOCTRL 0x6c
+#define CC_GPIOPOL 0x70
+#define CC_GPIOINTM 0x74
+#define CC_WATCHDOG 0x80
+#define CC_CLKC_N 0x90
+#define CC_CLKC_M0 0x94
+#define CC_CLKC_M1 0x98
+#define CC_CLKC_M2 0x9c
+#define CC_CLKC_M3 0xa0
+#define CC_CLKDIV 0xa4
+#define CC_SYS_CLK_CTL 0xc0
+#define CC_CLK_CTL_ST SI_CLK_CTL_ST
+#define PMU_CTL 0x600
+#define PMU_CAP 0x604
+#define PMU_ST 0x608
+#define PMU_RES_STATE 0x60c
+#define PMU_TIMER 0x614
+#define PMU_MIN_RES_MASK 0x618
+#define PMU_MAX_RES_MASK 0x61c
+#define CC_CHIPCTL_ADDR 0x650
+#define CC_CHIPCTL_DATA 0x654
+#define PMU_REG_CONTROL_ADDR 0x658
+#define PMU_REG_CONTROL_DATA 0x65C
+#define PMU_PLL_CONTROL_ADDR 0x660
+#define PMU_PLL_CONTROL_DATA 0x664
+#define CC_SROM_OTP 0x800 /* SROM/OTP address space */
+
+/* chipid */
+#define CID_ID_MASK 0x0000ffff /* Chip Id mask */
+#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */
+#define CID_REV_SHIFT 16 /* Chip Revision shift */
+#define CID_PKG_MASK 0x00f00000 /* Package Option mask */
+#define CID_PKG_SHIFT 20 /* Package Option shift */
+#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */
+#define CID_CC_SHIFT 24
+#define CID_TYPE_MASK 0xf0000000 /* Chip Type */
+#define CID_TYPE_SHIFT 28
+
+/* capabilities */
+#define CC_CAP_UARTS_MASK 0x00000003 /* Number of UARTs */
+#define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */
+#define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */
+#define CC_CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */
+#define CC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */
+#define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */
+#define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */
+#define CC_CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */
+#define CC_CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */
+#define CC_CAP_FLASH_MASK 0x00000700 /* Type of flash */
+#define CC_CAP_PLL_MASK 0x00038000 /* Type of PLL */
+#define CC_CAP_PWR_CTL 0x00040000 /* Power control */
+#define CC_CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */
+#define CC_CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */
+#define CC_CAP_OTPSIZE_BASE 5 /* OTP Size base */
+#define CC_CAP_JTAGP 0x00400000 /* JTAG Master Present */
+#define CC_CAP_ROM 0x00800000 /* Internal boot rom active */
+#define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */
+#define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */
+#define CC_CAP_SROM 0x40000000 /* Srom Present, rev >= 32 */
+#define CC_CAP_NFLASH 0x80000000 /* Nand flash present, rev >= 35 */
+
+#define CC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */
+#define CC_CAP2_GSIO 0x00000002 /* GSIO (spi/i2c) present, rev >= 37 */
+
+/* PLL type */
+#define PLL_NONE 0x00000000
+#define PLL_TYPE1 0x00010000 /* 48MHz base, 3 dividers */
+#define PLL_TYPE2 0x00020000 /* 48MHz, 4 dividers */
+#define PLL_TYPE3 0x00030000 /* 25MHz, 2 dividers */
+#define PLL_TYPE4 0x00008000 /* 48MHz, 4 dividers */
+#define PLL_TYPE5 0x00018000 /* 25MHz, 4 dividers */
+#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */
+#define PLL_TYPE7 0x00038000 /* 25MHz, 4 dividers */
+
+/* ILP clock */
+#define ILP_CLOCK 32000
+
+/* ALP clock on pre-PMU chips */
+#define ALP_CLOCK 20000000
+
+/* HT clock */
+#define HT_CLOCK 80000000
+
+/* corecontrol */
+#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */
+#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+#define CC_UARTCLKEN 0x00000008 /* enable UART Clock (corerev > = 21 */
+
+/* chipcontrol */
+#define CHIPCTRL_4321A0_DEFAULT 0x3a4
+#define CHIPCTRL_4321A1_DEFAULT 0x0a4
+#define CHIPCTRL_4321_PLL_DOWN 0x800000 /* serdes PLL down override */
+
+/* Fields in the otpstatus register in rev >= 21 */
+#define OTPS_OL_MASK 0x000000ff
+#define OTPS_OL_MFG 0x00000001 /* manuf row is locked */
+#define OTPS_OL_OR1 0x00000002 /* otp redundancy row 1 is locked */
+#define OTPS_OL_OR2 0x00000004 /* otp redundancy row 2 is locked */
+#define OTPS_OL_GU 0x00000008 /* general use region is locked */
+#define OTPS_GUP_MASK 0x00000f00
+#define OTPS_GUP_SHIFT 8
+#define OTPS_GUP_HW 0x00000100 /* h/w subregion is programmed */
+#define OTPS_GUP_SW 0x00000200 /* s/w subregion is programmed */
+#define OTPS_GUP_CI 0x00000400 /* chipid/pkgopt subregion is programmed */
+#define OTPS_GUP_FUSE 0x00000800 /* fuse subregion is programmed */
+#define OTPS_READY 0x00001000
+#define OTPS_RV(x) (1 << (16 + (x))) /* redundancy entry valid */
+#define OTPS_RV_MASK 0x0fff0000
+
+/* Fields in the otpcontrol register in rev >= 21 */
+#define OTPC_PROGSEL 0x00000001
+#define OTPC_PCOUNT_MASK 0x0000000e
+#define OTPC_PCOUNT_SHIFT 1
+#define OTPC_VSEL_MASK 0x000000f0
+#define OTPC_VSEL_SHIFT 4
+#define OTPC_TMM_MASK 0x00000700
+#define OTPC_TMM_SHIFT 8
+#define OTPC_ODM 0x00000800
+#define OTPC_PROGEN 0x80000000
+
+/* Fields in otpprog in rev >= 21 and HND OTP */
+#define OTPP_COL_MASK 0x000000ff
+#define OTPP_COL_SHIFT 0
+#define OTPP_ROW_MASK 0x0000ff00
+#define OTPP_ROW_SHIFT 8
+#define OTPP_OC_MASK 0x0f000000
+#define OTPP_OC_SHIFT 24
+#define OTPP_READERR 0x10000000
+#define OTPP_VALUE_MASK 0x20000000
+#define OTPP_VALUE_SHIFT 29
+#define OTPP_START_BUSY 0x80000000
+#define OTPP_READ 0x40000000 /* HND OTP */
+
+/* otplayout reg corerev >= 36 */
+#define OTP_CISFORMAT_NEW 0x80000000
+
+/* Opcodes for OTPP_OC field */
+#define OTPPOC_READ 0
+#define OTPPOC_BIT_PROG 1
+#define OTPPOC_VERIFY 3
+#define OTPPOC_INIT 4
+#define OTPPOC_SET 5
+#define OTPPOC_RESET 6
+#define OTPPOC_OCST 7
+#define OTPPOC_ROW_LOCK 8
+#define OTPPOC_PRESCN_TEST 9
+
+/* Jtagm characteristics that appeared at a given corerev */
+#define JTAGM_CREV_OLD 10 /* Old command set, 16bit max IR */
+#define JTAGM_CREV_IRP 22 /* Able to do pause-ir */
+#define JTAGM_CREV_RTI 28 /* Able to do return-to-idle */
+
+/* jtagcmd */
+#define JCMD_START 0x80000000
+#define JCMD_BUSY 0x80000000
+#define JCMD_STATE_MASK 0x60000000
+#define JCMD_STATE_TLR 0x00000000 /* Test-logic-reset */
+#define JCMD_STATE_PIR 0x20000000 /* Pause IR */
+#define JCMD_STATE_PDR 0x40000000 /* Pause DR */
+#define JCMD_STATE_RTI 0x60000000 /* Run-test-idle */
+#define JCMD0_ACC_MASK 0x0000f000
+#define JCMD0_ACC_IRDR 0x00000000
+#define JCMD0_ACC_DR 0x00001000
+#define JCMD0_ACC_IR 0x00002000
+#define JCMD0_ACC_RESET 0x00003000
+#define JCMD0_ACC_IRPDR 0x00004000
+#define JCMD0_ACC_PDR 0x00005000
+#define JCMD0_IRW_MASK 0x00000f00
+#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */
+#define JCMD_ACC_IRDR 0x00000000
+#define JCMD_ACC_DR 0x00010000
+#define JCMD_ACC_IR 0x00020000
+#define JCMD_ACC_RESET 0x00030000
+#define JCMD_ACC_IRPDR 0x00040000
+#define JCMD_ACC_PDR 0x00050000
+#define JCMD_ACC_PIR 0x00060000
+#define JCMD_ACC_IRDR_I 0x00070000 /* rev 28: return to run-test-idle */
+#define JCMD_ACC_DR_I 0x00080000 /* rev 28: return to run-test-idle */
+#define JCMD_IRW_MASK 0x00001f00
+#define JCMD_IRW_SHIFT 8
+#define JCMD_DRW_MASK 0x0000003f
+
+/* jtagctrl */
+#define JCTRL_FORCE_CLK 4 /* Force clock */
+#define JCTRL_EXT_EN 2 /* Enable external targets */
+#define JCTRL_EN 1 /* Enable Jtag master */
+
+/* Fields in clkdiv */
+#define CLKD_SFLASH 0x0f000000
+#define CLKD_SFLASH_SHIFT 24
+#define CLKD_OTP 0x000f0000
+#define CLKD_OTP_SHIFT 16
+#define CLKD_JTAG 0x00000f00
+#define CLKD_JTAG_SHIFT 8
+#define CLKD_UART 0x000000ff
+
+#define CLKD2_SROM 0x00000003
+
+/* intstatus/intmask */
+#define CI_GPIO 0x00000001 /* gpio intr */
+#define CI_EI 0x00000002 /* extif intr (corerev >= 3) */
+#define CI_TEMP 0x00000004 /* temp. ctrl intr (corerev >= 15) */
+#define CI_SIRQ 0x00000008 /* serial IRQ intr (corerev >= 15) */
+#define CI_PMU 0x00000020 /* pmu intr (corerev >= 21) */
+#define CI_UART 0x00000040 /* uart intr (corerev >= 21) */
+#define CI_WDRESET 0x80000000 /* watchdog reset occurred */
+
+/* slow_clk_ctl */
+#define SCC_SS_MASK 0x00000007 /* slow clock source mask */
+#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */
+#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */
+#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */
+#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled,
+ * 0: LPO is enabled
+ */
+#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock,
+ * 0: power logic control
+ */
+#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors
+ * PLL clock disable requests from core
+ */
+#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't
+ * disable crystal when appropriate
+ */
+#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
+#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define SCC_CD_SHIFT 16
+
+/* system_clk_ctl */
+#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */
+#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */
+#define SYCC_FP 0x00000004 /* ForcePLLOn */
+#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */
+#define SYCC_HR 0x00000010 /* Force HT */
+#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */
+#define SYCC_CD_SHIFT 16
+
+/* Indirect backplane access */
+#define BPIA_BYTEEN 0x0000000f
+#define BPIA_SZ1 0x00000001
+#define BPIA_SZ2 0x00000003
+#define BPIA_SZ4 0x00000007
+#define BPIA_SZ8 0x0000000f
+#define BPIA_WRITE 0x00000100
+#define BPIA_START 0x00000200
+#define BPIA_BUSY 0x00000200
+#define BPIA_ERROR 0x00000400
+
+/* pcmcia/prog/flash_config */
+#define CF_EN 0x00000001 /* enable */
+#define CF_EM_MASK 0x0000000e /* mode */
+#define CF_EM_SHIFT 1
+#define CF_EM_FLASH 0 /* flash/asynchronous mode */
+#define CF_EM_SYNC 2 /* synchronous mode */
+#define CF_EM_PCMCIA 4 /* pcmcia mode */
+#define CF_DS 0x00000010 /* destsize: 0=8bit, 1=16bit */
+#define CF_BS 0x00000020 /* byteswap */
+#define CF_CD_MASK 0x000000c0 /* clock divider */
+#define CF_CD_SHIFT 6
+#define CF_CD_DIV2 0x00000000 /* backplane/2 */
+#define CF_CD_DIV3 0x00000040 /* backplane/3 */
+#define CF_CD_DIV4 0x00000080 /* backplane/4 */
+#define CF_CE 0x00000100 /* clock enable */
+#define CF_SB 0x00000200 /* size/bytestrobe (synch only) */
+
+/* pcmcia_memwait */
+#define PM_W0_MASK 0x0000003f /* waitcount0 */
+#define PM_W1_MASK 0x00001f00 /* waitcount1 */
+#define PM_W1_SHIFT 8
+#define PM_W2_MASK 0x001f0000 /* waitcount2 */
+#define PM_W2_SHIFT 16
+#define PM_W3_MASK 0x1f000000 /* waitcount3 */
+#define PM_W3_SHIFT 24
+
+/* pcmcia_attrwait */
+#define PA_W0_MASK 0x0000003f /* waitcount0 */
+#define PA_W1_MASK 0x00001f00 /* waitcount1 */
+#define PA_W1_SHIFT 8
+#define PA_W2_MASK 0x001f0000 /* waitcount2 */
+#define PA_W2_SHIFT 16
+#define PA_W3_MASK 0x1f000000 /* waitcount3 */
+#define PA_W3_SHIFT 24
+
+/* pcmcia_iowait */
+#define PI_W0_MASK 0x0000003f /* waitcount0 */
+#define PI_W1_MASK 0x00001f00 /* waitcount1 */
+#define PI_W1_SHIFT 8
+#define PI_W2_MASK 0x001f0000 /* waitcount2 */
+#define PI_W2_SHIFT 16
+#define PI_W3_MASK 0x1f000000 /* waitcount3 */
+#define PI_W3_SHIFT 24
+
+/* prog_waitcount */
+#define PW_W0_MASK 0x0000001f /* waitcount0 */
+#define PW_W1_MASK 0x00001f00 /* waitcount1 */
+#define PW_W1_SHIFT 8
+#define PW_W2_MASK 0x001f0000 /* waitcount2 */
+#define PW_W2_SHIFT 16
+#define PW_W3_MASK 0x1f000000 /* waitcount3 */
+#define PW_W3_SHIFT 24
+
+#define PW_W0 0x0000000c
+#define PW_W1 0x00000a00
+#define PW_W2 0x00020000
+#define PW_W3 0x01000000
+
+/* flash_waitcount */
+#define FW_W0_MASK 0x0000003f /* waitcount0 */
+#define FW_W1_MASK 0x00001f00 /* waitcount1 */
+#define FW_W1_SHIFT 8
+#define FW_W2_MASK 0x001f0000 /* waitcount2 */
+#define FW_W2_SHIFT 16
+#define FW_W3_MASK 0x1f000000 /* waitcount3 */
+#define FW_W3_SHIFT 24
+
+/* When Srom support present, fields in sromcontrol */
+#define SRC_START 0x80000000
+#define SRC_BUSY 0x80000000
+#define SRC_OPCODE 0x60000000
+#define SRC_OP_READ 0x00000000
+#define SRC_OP_WRITE 0x20000000
+#define SRC_OP_WRDIS 0x40000000
+#define SRC_OP_WREN 0x60000000
+#define SRC_OTPSEL 0x00000010
+#define SRC_LOCK 0x00000008
+#define SRC_SIZE_MASK 0x00000006
+#define SRC_SIZE_1K 0x00000000
+#define SRC_SIZE_4K 0x00000002
+#define SRC_SIZE_16K 0x00000004
+#define SRC_SIZE_SHIFT 1
+#define SRC_PRESENT 0x00000001
+
+/* Fields in pmucontrol */
+#define PCTL_ILP_DIV_MASK 0xffff0000
+#define PCTL_ILP_DIV_SHIFT 16
+#define PCTL_PLL_PLLCTL_UPD 0x00000400 /* rev 2 */
+#define PCTL_NOILP_ON_WAIT 0x00000200 /* rev 1 */
+#define PCTL_HT_REQ_EN 0x00000100
+#define PCTL_ALP_REQ_EN 0x00000080
+#define PCTL_XTALFREQ_MASK 0x0000007c
+#define PCTL_XTALFREQ_SHIFT 2
+#define PCTL_ILP_DIV_EN 0x00000002
+#define PCTL_LPO_SEL 0x00000001
+
+/* Fields in clkstretch */
+#define CSTRETCH_HT 0xffff0000
+#define CSTRETCH_ALP 0x0000ffff
+
+/* gpiotimerval */
+#define GPIO_ONTIME_SHIFT 16
+
+/* clockcontrol_n */
+#define CN_N1_MASK 0x3f /* n1 control */
+#define CN_N2_MASK 0x3f00 /* n2 control */
+#define CN_N2_SHIFT 8
+#define CN_PLLC_MASK 0xf0000 /* pll control */
+#define CN_PLLC_SHIFT 16
+
+/* clockcontrol_sb/pci/uart */
+#define CC_M1_MASK 0x3f /* m1 control */
+#define CC_M2_MASK 0x3f00 /* m2 control */
+#define CC_M2_SHIFT 8
+#define CC_M3_MASK 0x3f0000 /* m3 control */
+#define CC_M3_SHIFT 16
+#define CC_MC_MASK 0x1f000000 /* mux control */
+#define CC_MC_SHIFT 24
+
+/* N3M Clock control magic field values */
+#define CC_F6_2 0x02 /* A factor of 2 in */
+#define CC_F6_3 0x03 /* 6-bit fields like */
+#define CC_F6_4 0x05 /* N1, M1 or M3 */
+#define CC_F6_5 0x09
+#define CC_F6_6 0x11
+#define CC_F6_7 0x21
+
+#define CC_F5_BIAS 5 /* 5-bit fields get this added */
+
+#define CC_MC_BYPASS 0x08
+#define CC_MC_M1 0x04
+#define CC_MC_M1M2 0x02
+#define CC_MC_M1M2M3 0x01
+#define CC_MC_M1M3 0x11
+
+/* Type 2 Clock control magic field values */
+#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */
+#define CC_T2M2_BIAS 3 /* m2 bias */
+
+#define CC_T2MC_M1BYP 1
+#define CC_T2MC_M2BYP 2
+#define CC_T2MC_M3BYP 4
+
+/* Type 6 Clock control magic field values */
+#define CC_T6_MMASK 1 /* bits of interest in m */
+#define CC_T6_M0 120000000 /* sb clock for m = 0 */
+#define CC_T6_M1 100000000 /* sb clock for m = 1 */
+#define SB2MIPS_T6(sb) (2 * (sb))
+
+/* Common clock base */
+#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */
+#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLLs */
+
+/* Clock control values for 200MHz in 5350 */
+#define CLKC_5350_N 0x0311
+#define CLKC_5350_M 0x04020009
+
+/* Flash types in the chipcommon capabilities register */
+#define FLASH_NONE 0x000 /* No flash */
+#define SFLASH_ST 0x100 /* ST serial flash */
+#define SFLASH_AT 0x200 /* Atmel serial flash */
+#define PFLASH 0x700 /* Parallel flash */
+
+/* Bits in the ExtBus config registers */
+#define CC_CFG_EN 0x0001 /* Enable */
+#define CC_CFG_EM_MASK 0x000e /* Extif Mode */
+#define CC_CFG_EM_ASYNC 0x0000 /* Async/Parallel flash */
+#define CC_CFG_EM_SYNC 0x0002 /* Synchronous */
+#define CC_CFG_EM_PCMCIA 0x0004 /* PCMCIA */
+#define CC_CFG_EM_IDE 0x0006 /* IDE */
+#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
+#define CC_CFG_CD_MASK 0x00e0 /* Sync: Clock divisor, rev >= 20 */
+#define CC_CFG_CE 0x0100 /* Sync: Clock enable, rev >= 20 */
+#define CC_CFG_SB 0x0200 /* Sync: Size/Bytestrobe, rev >= 20 */
+#define CC_CFG_IS 0x0400 /* Extif Sync Clk Select, rev >= 20 */
+
+/* ExtBus address space */
+#define CC_EB_BASE 0x1a000000 /* Chipc ExtBus base address */
+#define CC_EB_PCMCIA_MEM 0x1a000000 /* PCMCIA 0 memory base address */
+#define CC_EB_PCMCIA_IO 0x1a200000 /* PCMCIA 0 I/O base address */
+#define CC_EB_PCMCIA_CFG 0x1a400000 /* PCMCIA 0 config base address */
+#define CC_EB_IDE 0x1a800000 /* IDE memory base */
+#define CC_EB_PCMCIA1_MEM 0x1a800000 /* PCMCIA 1 memory base address */
+#define CC_EB_PCMCIA1_IO 0x1aa00000 /* PCMCIA 1 I/O base address */
+#define CC_EB_PCMCIA1_CFG 0x1ac00000 /* PCMCIA 1 config base address */
+#define CC_EB_PROGIF 0x1b000000 /* ProgIF Async/Sync base address */
+
+/* Start/busy bit in flashcontrol */
+#define SFLASH_OPCODE 0x000000ff
+#define SFLASH_ACTION 0x00000700
+#define SFLASH_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
+#define SFLASH_START 0x80000000
+#define SFLASH_BUSY SFLASH_START
+
+/* flashcontrol action codes */
+#define SFLASH_ACT_OPONLY 0x0000 /* Issue opcode only */
+#define SFLASH_ACT_OP1D 0x0100 /* opcode + 1 data byte */
+#define SFLASH_ACT_OP3A 0x0200 /* opcode + 3 addr bytes */
+#define SFLASH_ACT_OP3A1D 0x0300 /* opcode + 3 addr & 1 data bytes */
+#define SFLASH_ACT_OP3A4D 0x0400 /* opcode + 3 addr & 4 data bytes */
+#define SFLASH_ACT_OP3A4X4D 0x0500 /* opcode + 3 addr, 4 don't care & 4 data bytes */
+#define SFLASH_ACT_OP3A1X4D 0x0700 /* opcode + 3 addr, 1 don't care & 4 data bytes */
+
+/* flashcontrol action+opcodes for ST flashes */
+#define SFLASH_ST_WREN 0x0006 /* Write Enable */
+#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */
+#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */
+#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */
+#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */
+#define SFLASH_ST_PP 0x0302 /* Page Program */
+#define SFLASH_ST_SE 0x02d8 /* Sector Erase */
+#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */
+#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */
+#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */
+#define SFLASH_ST_CSA 0x1000 /* Keep chip select asserted */
+#define SFLASH_ST_SSE 0x0220 /* Sub-sector Erase */
+
+/* Status register bits for ST flashes */
+#define SFLASH_ST_WIP 0x01 /* Write In Progress */
+#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */
+#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */
+#define SFLASH_ST_BP_SHIFT 2
+#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */
+
+/* flashcontrol action+opcodes for Atmel flashes */
+#define SFLASH_AT_READ 0x07e8
+#define SFLASH_AT_PAGE_READ 0x07d2
+#define SFLASH_AT_BUF1_READ
+#define SFLASH_AT_BUF2_READ
+#define SFLASH_AT_STATUS 0x01d7
+#define SFLASH_AT_BUF1_WRITE 0x0384
+#define SFLASH_AT_BUF2_WRITE 0x0387
+#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283
+#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286
+#define SFLASH_AT_BUF1_PROGRAM 0x0288
+#define SFLASH_AT_BUF2_PROGRAM 0x0289
+#define SFLASH_AT_PAGE_ERASE 0x0281
+#define SFLASH_AT_BLOCK_ERASE 0x0250
+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
+#define SFLASH_AT_BUF1_LOAD 0x0253
+#define SFLASH_AT_BUF2_LOAD 0x0255
+#define SFLASH_AT_BUF1_COMPARE 0x0260
+#define SFLASH_AT_BUF2_COMPARE 0x0261
+#define SFLASH_AT_BUF1_REPROGRAM 0x0258
+#define SFLASH_AT_BUF2_REPROGRAM 0x0259
+
+/* Status register bits for Atmel flashes */
+#define SFLASH_AT_READY 0x80
+#define SFLASH_AT_MISMATCH 0x40
+#define SFLASH_AT_ID_MASK 0x38
+#define SFLASH_AT_ID_SHIFT 3
+
+/*
+ * These are the UART port assignments, expressed as offsets from the base
+ * register. These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
+#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
+#define UART_IER 1 /* In/Out: Interrupt Enable Register (DLAB=0) */
+#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */
+#define UART_IIR 2 /* In: Interrupt Identity Register */
+#define UART_FCR 2 /* Out: FIFO Control Register */
+#define UART_LCR 3 /* Out: Line Control Register */
+#define UART_MCR 4 /* Out: Modem Control Register */
+#define UART_LSR 5 /* In: Line Status Register */
+#define UART_MSR 6 /* In: Modem Status Register */
+#define UART_SCR 7 /* I/O: Scratch Register */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+#define UART_LCR_WLEN8 0x03 /* Word length: 8 bits */
+#define UART_MCR_OUT2 0x08 /* MCR GPIO out 2 */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+#define UART_LSR_RX_FIFO 0x80 /* Receive FIFO error */
+#define UART_LSR_TDHR 0x40 /* Data-hold-register empty */
+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
+#define UART_LSR_BREAK 0x10 /* Break interrupt */
+#define UART_LSR_FRAMING 0x08 /* Framing error */
+#define UART_LSR_PARITY 0x04 /* Parity error */
+#define UART_LSR_OVERRUN 0x02 /* Overrun error */
+#define UART_LSR_RXRDY 0x01 /* Receiver ready */
+#define UART_FCR_FIFO_ENABLE 1 /* FIFO control register bit controlling FIFO enable/disable */
+
+/* Interrupt Identity Register (IIR) bits */
+#define UART_IIR_FIFO_MASK 0xc0 /* IIR FIFO disable/enabled mask */
+#define UART_IIR_INT_MASK 0xf /* IIR interrupt ID source */
+#define UART_IIR_MDM_CHG 0x0 /* Modem status changed */
+#define UART_IIR_NOINT 0x1 /* No interrupt pending */
+#define UART_IIR_THRE 0x2 /* THR empty */
+#define UART_IIR_RCVD_DATA 0x4 /* Received data available */
+#define UART_IIR_RCVR_STATUS 0x6 /* Receiver status */
+#define UART_IIR_CHAR_TIME 0xc /* Character time */
+
+/* Interrupt Enable Register (IER) bits */
+#define UART_IER_EDSSI 8 /* enable modem status interrupt */
+#define UART_IER_ELSI 4 /* enable receiver line status interrupt */
+#define UART_IER_ETBEI 2 /* enable transmitter holding register empty interrupt */
+#define UART_IER_ERBFI 1 /* enable data available interrupt */
+
+/* pmustatus */
+#define PST_EXTLPOAVAIL 0x0100
+#define PST_WDRESET 0x0080
+#define PST_INTPEND 0x0040
+#define PST_SBCLKST 0x0030
+#define PST_SBCLKST_ILP 0x0010
+#define PST_SBCLKST_ALP 0x0020
+#define PST_SBCLKST_HT 0x0030
+#define PST_ALPAVAIL 0x0008
+#define PST_HTAVAIL 0x0004
+#define PST_RESINIT 0x0003
+
+/* pmucapabilities */
+#define PCAP_REV_MASK 0x000000ff
+#define PCAP_RC_MASK 0x00001f00
+#define PCAP_RC_SHIFT 8
+#define PCAP_TC_MASK 0x0001e000
+#define PCAP_TC_SHIFT 13
+#define PCAP_PC_MASK 0x001e0000
+#define PCAP_PC_SHIFT 17
+#define PCAP_VC_MASK 0x01e00000
+#define PCAP_VC_SHIFT 21
+#define PCAP_CC_MASK 0x1e000000
+#define PCAP_CC_SHIFT 25
+#define PCAP5_PC_MASK 0x003e0000 /* PMU corerev >= 5 */
+#define PCAP5_PC_SHIFT 17
+#define PCAP5_VC_MASK 0x07c00000
+#define PCAP5_VC_SHIFT 22
+#define PCAP5_CC_MASK 0xf8000000
+#define PCAP5_CC_SHIFT 27
+
+/* PMU Resource Request Timer registers */
+/* This is based on PmuRev0 */
+#define PRRT_TIME_MASK 0x03ff
+#define PRRT_INTEN 0x0400
+#define PRRT_REQ_ACTIVE 0x0800
+#define PRRT_ALP_REQ 0x1000
+#define PRRT_HT_REQ 0x2000
+
+/* PMU resource bit position */
+#define PMURES_BIT(bit) (1 << (bit))
+
+/* PMU resource number limit */
+#define PMURES_MAX_RESNUM 30
+
+/* PMU chip control0 register */
+#define PMU_CHIPCTL0 0
+
+/* PMU chip control1 register */
+#define PMU_CHIPCTL1 1
+#define PMU_CC1_RXC_DLL_BYPASS 0x00010000
+
+#define PMU_CC1_IF_TYPE_MASK 0x00000030
+#define PMU_CC1_IF_TYPE_RMII 0x00000000
+#define PMU_CC1_IF_TYPE_MII 0x00000010
+#define PMU_CC1_IF_TYPE_RGMII 0x00000020
+
+#define PMU_CC1_SW_TYPE_MASK 0x000000c0
+#define PMU_CC1_SW_TYPE_EPHY 0x00000000
+#define PMU_CC1_SW_TYPE_EPHYMII 0x00000040
+#define PMU_CC1_SW_TYPE_EPHYRMII 0x00000080
+#define PMU_CC1_SW_TYPE_RGMII 0x000000c0
+
+/* PMU corerev and chip specific PLL controls.
+ * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary number
+ * to differentiate different PLLs controlled by the same PMU rev.
+ */
+/* pllcontrol registers */
+/* PDIV, div_phy, div_arm, div_adc, dith_sel, ioff, kpd_scale, lsb_sel, mash_sel, lf_c & lf_r */
+#define PMU0_PLL0_PLLCTL0 0
+#define PMU0_PLL0_PC0_PDIV_MASK 1
+#define PMU0_PLL0_PC0_PDIV_FREQ 25000
+#define PMU0_PLL0_PC0_DIV_ARM_MASK 0x00000038
+#define PMU0_PLL0_PC0_DIV_ARM_SHIFT 3
+#define PMU0_PLL0_PC0_DIV_ARM_BASE 8
+
+/* PC0_DIV_ARM for PLLOUT_ARM */
+#define PMU0_PLL0_PC0_DIV_ARM_110MHZ 0
+#define PMU0_PLL0_PC0_DIV_ARM_97_7MHZ 1
+#define PMU0_PLL0_PC0_DIV_ARM_88MHZ 2
+#define PMU0_PLL0_PC0_DIV_ARM_80MHZ 3 /* Default */
+#define PMU0_PLL0_PC0_DIV_ARM_73_3MHZ 4
+#define PMU0_PLL0_PC0_DIV_ARM_67_7MHZ 5
+#define PMU0_PLL0_PC0_DIV_ARM_62_9MHZ 6
+#define PMU0_PLL0_PC0_DIV_ARM_58_6MHZ 7
+
+/* Wildcard base, stop_mod, en_lf_tp, en_cal & lf_r2 */
+#define PMU0_PLL0_PLLCTL1 1
+#define PMU0_PLL0_PC1_WILD_INT_MASK 0xf0000000
+#define PMU0_PLL0_PC1_WILD_INT_SHIFT 28
+#define PMU0_PLL0_PC1_WILD_FRAC_MASK 0x0fffff00
+#define PMU0_PLL0_PC1_WILD_FRAC_SHIFT 8
+#define PMU0_PLL0_PC1_STOP_MOD 0x00000040
+
+/* Wildcard base, vco_calvar, vco_swc, vco_var_selref, vso_ical & vco_sel_avdd */
+#define PMU0_PLL0_PLLCTL2 2
+#define PMU0_PLL0_PC2_WILD_INT_MASK 0xf
+#define PMU0_PLL0_PC2_WILD_INT_SHIFT 4
+
+/* pllcontrol registers */
+/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypass_sdmod */
+#define PMU1_PLL0_PLLCTL0 0
+#define PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000
+#define PMU1_PLL0_PC0_P1DIV_SHIFT 20
+#define PMU1_PLL0_PC0_P2DIV_MASK 0x0f000000
+#define PMU1_PLL0_PC0_P2DIV_SHIFT 24
+
+/* m<x>div */
+#define PMU1_PLL0_PLLCTL1 1
+#define PMU1_PLL0_PC1_M1DIV_MASK 0x000000ff
+#define PMU1_PLL0_PC1_M1DIV_SHIFT 0
+#define PMU1_PLL0_PC1_M2DIV_MASK 0x0000ff00
+#define PMU1_PLL0_PC1_M2DIV_SHIFT 8
+#define PMU1_PLL0_PC1_M3DIV_MASK 0x00ff0000
+#define PMU1_PLL0_PC1_M3DIV_SHIFT 16
+#define PMU1_PLL0_PC1_M4DIV_MASK 0xff000000
+#define PMU1_PLL0_PC1_M4DIV_SHIFT 24
+
+#define DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT 8
+#define DOT11MAC_880MHZ_CLK_DIVISOR_MASK (0xFF << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT)
+#define DOT11MAC_880MHZ_CLK_DIVISOR_VAL (0xE << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT)
+
+/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */
+#define PMU1_PLL0_PLLCTL2 2
+#define PMU1_PLL0_PC2_M5DIV_MASK 0x000000ff
+#define PMU1_PLL0_PC2_M5DIV_SHIFT 0
+#define PMU1_PLL0_PC2_M6DIV_MASK 0x0000ff00
+#define PMU1_PLL0_PC2_M6DIV_SHIFT 8
+#define PMU1_PLL0_PC2_NDIV_MODE_MASK 0x000e0000
+#define PMU1_PLL0_PC2_NDIV_MODE_SHIFT 17
+#define PMU1_PLL0_PC2_NDIV_MODE_MASH 1
+#define PMU1_PLL0_PC2_NDIV_MODE_MFB 2 /* recommended for 4319 */
+#define PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000
+#define PMU1_PLL0_PC2_NDIV_INT_SHIFT 20
+
+/* ndiv_frac */
+#define PMU1_PLL0_PLLCTL3 3
+#define PMU1_PLL0_PC3_NDIV_FRAC_MASK 0x00ffffff
+#define PMU1_PLL0_PC3_NDIV_FRAC_SHIFT 0
+
+/* pll_ctrl */
+#define PMU1_PLL0_PLLCTL4 4
+
+/* pll_ctrl, vco_rng, clkdrive_ch<x> */
+#define PMU1_PLL0_PLLCTL5 5
+#define PMU1_PLL0_PC5_CLK_DRV_MASK 0xffffff00
+#define PMU1_PLL0_PC5_CLK_DRV_SHIFT 8
+
+/* PMU rev 2 control words */
+#define PMU2_PHY_PLL_PLLCTL 4
+#define PMU2_SI_PLL_PLLCTL 10
+
+/* PMU rev 2 */
+/* pllcontrol registers */
+/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypass_sdmod */
+#define PMU2_PLL_PLLCTL0 0
+#define PMU2_PLL_PC0_P1DIV_MASK 0x00f00000
+#define PMU2_PLL_PC0_P1DIV_SHIFT 20
+#define PMU2_PLL_PC0_P2DIV_MASK 0x0f000000
+#define PMU2_PLL_PC0_P2DIV_SHIFT 24
+
+/* m<x>div */
+#define PMU2_PLL_PLLCTL1 1
+#define PMU2_PLL_PC1_M1DIV_MASK 0x000000ff
+#define PMU2_PLL_PC1_M1DIV_SHIFT 0
+#define PMU2_PLL_PC1_M2DIV_MASK 0x0000ff00
+#define PMU2_PLL_PC1_M2DIV_SHIFT 8
+#define PMU2_PLL_PC1_M3DIV_MASK 0x00ff0000
+#define PMU2_PLL_PC1_M3DIV_SHIFT 16
+#define PMU2_PLL_PC1_M4DIV_MASK 0xff000000
+#define PMU2_PLL_PC1_M4DIV_SHIFT 24
+
+/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */
+#define PMU2_PLL_PLLCTL2 2
+#define PMU2_PLL_PC2_M5DIV_MASK 0x000000ff
+#define PMU2_PLL_PC2_M5DIV_SHIFT 0
+#define PMU2_PLL_PC2_M6DIV_MASK 0x0000ff00
+#define PMU2_PLL_PC2_M6DIV_SHIFT 8
+#define PMU2_PLL_PC2_NDIV_MODE_MASK 0x000e0000
+#define PMU2_PLL_PC2_NDIV_MODE_SHIFT 17
+#define PMU2_PLL_PC2_NDIV_INT_MASK 0x1ff00000
+#define PMU2_PLL_PC2_NDIV_INT_SHIFT 20
+
+/* ndiv_frac */
+#define PMU2_PLL_PLLCTL3 3
+#define PMU2_PLL_PC3_NDIV_FRAC_MASK 0x00ffffff
+#define PMU2_PLL_PC3_NDIV_FRAC_SHIFT 0
+
+/* pll_ctrl */
+#define PMU2_PLL_PLLCTL4 4
+
+/* pll_ctrl, vco_rng, clkdrive_ch<x> */
+#define PMU2_PLL_PLLCTL5 5
+#define PMU2_PLL_PC5_CLKDRIVE_CH1_MASK 0x00000f00
+#define PMU2_PLL_PC5_CLKDRIVE_CH1_SHIFT 8
+#define PMU2_PLL_PC5_CLKDRIVE_CH2_MASK 0x0000f000
+#define PMU2_PLL_PC5_CLKDRIVE_CH2_SHIFT 12
+#define PMU2_PLL_PC5_CLKDRIVE_CH3_MASK 0x000f0000
+#define PMU2_PLL_PC5_CLKDRIVE_CH3_SHIFT 16
+#define PMU2_PLL_PC5_CLKDRIVE_CH4_MASK 0x00f00000
+#define PMU2_PLL_PC5_CLKDRIVE_CH4_SHIFT 20
+#define PMU2_PLL_PC5_CLKDRIVE_CH5_MASK 0x0f000000
+#define PMU2_PLL_PC5_CLKDRIVE_CH5_SHIFT 24
+#define PMU2_PLL_PC5_CLKDRIVE_CH6_MASK 0xf0000000
+#define PMU2_PLL_PC5_CLKDRIVE_CH6_SHIFT 28
+
+/* PMU rev 5 (& 6) */
+#define PMU5_PLL_P1P2_OFF 0
+#define PMU5_PLL_P1_MASK 0x0f000000
+#define PMU5_PLL_P1_SHIFT 24
+#define PMU5_PLL_P2_MASK 0x00f00000
+#define PMU5_PLL_P2_SHIFT 20
+#define PMU5_PLL_M14_OFF 1
+#define PMU5_PLL_MDIV_MASK 0x000000ff
+#define PMU5_PLL_MDIV_WIDTH 8
+#define PMU5_PLL_NM5_OFF 2
+#define PMU5_PLL_NDIV_MASK 0xfff00000
+#define PMU5_PLL_NDIV_SHIFT 20
+#define PMU5_PLL_NDIV_MODE_MASK 0x000e0000
+#define PMU5_PLL_NDIV_MODE_SHIFT 17
+#define PMU5_PLL_FMAB_OFF 3
+#define PMU5_PLL_MRAT_MASK 0xf0000000
+#define PMU5_PLL_MRAT_SHIFT 28
+#define PMU5_PLL_ABRAT_MASK 0x08000000
+#define PMU5_PLL_ABRAT_SHIFT 27
+#define PMU5_PLL_FDIV_MASK 0x07ffffff
+#define PMU5_PLL_PLLCTL_OFF 4
+#define PMU5_PLL_PCHI_OFF 5
+#define PMU5_PLL_PCHI_MASK 0x0000003f
+
+/* pmu XtalFreqRatio */
+#define PMU_XTALFREQ_REG_ILPCTR_MASK 0x00001FFF
+#define PMU_XTALFREQ_REG_MEASURE_MASK 0x80000000
+#define PMU_XTALFREQ_REG_MEASURE_SHIFT 31
+
+/* Divider allocation in 4716/47162/5356/5357 */
+#define PMU5_MAINPLL_CPU 1
+#define PMU5_MAINPLL_MEM 2
+#define PMU5_MAINPLL_SI 3
+
+#define PMU7_PLL_PLLCTL7 7
+#define PMU7_PLL_PLLCTL8 8
+#define PMU7_PLL_PLLCTL11 11
+
+/* PLL usage in 4716/47162 */
+#define PMU4716_MAINPLL_PLL0 12
+
+/* PLL usage in 5356/5357 */
+#define PMU5356_MAINPLL_PLL0 0
+#define PMU5357_MAINPLL_PLL0 0
+
+/* 4716/47162 resources */
+#define RES4716_PROC_PLL_ON 0x00000040
+#define RES4716_PROC_HT_AVAIL 0x00000080
+
+/* 4716/4717/4718 Chip specific ChipControl register bits */
+#define CCTRL471X_I2S_PINS_ENABLE 0x0080 /* I2S pins off by default, shared with pflash */
+
+/* 5354 resources */
+#define RES5354_EXT_SWITCHER_PWM 0 /* 0x00001 */
+#define RES5354_BB_SWITCHER_PWM 1 /* 0x00002 */
+#define RES5354_BB_SWITCHER_BURST 2 /* 0x00004 */
+#define RES5354_BB_EXT_SWITCHER_BURST 3 /* 0x00008 */
+#define RES5354_ILP_REQUEST 4 /* 0x00010 */
+#define RES5354_RADIO_SWITCHER_PWM 5 /* 0x00020 */
+#define RES5354_RADIO_SWITCHER_BURST 6 /* 0x00040 */
+#define RES5354_ROM_SWITCH 7 /* 0x00080 */
+#define RES5354_PA_REF_LDO 8 /* 0x00100 */
+#define RES5354_RADIO_LDO 9 /* 0x00200 */
+#define RES5354_AFE_LDO 10 /* 0x00400 */
+#define RES5354_PLL_LDO 11 /* 0x00800 */
+#define RES5354_BG_FILTBYP 12 /* 0x01000 */
+#define RES5354_TX_FILTBYP 13 /* 0x02000 */
+#define RES5354_RX_FILTBYP 14 /* 0x04000 */
+#define RES5354_XTAL_PU 15 /* 0x08000 */
+#define RES5354_XTAL_EN 16 /* 0x10000 */
+#define RES5354_BB_PLL_FILTBYP 17 /* 0x20000 */
+#define RES5354_RF_PLL_FILTBYP 18 /* 0x40000 */
+#define RES5354_BB_PLL_PU 19 /* 0x80000 */
+
+/* 5357 Chip specific ChipControl register bits */
+#define CCTRL5357_EXTPA (1<<14) /* extPA in ChipControl 1, bit 14 */
+#define CCTRL5357_ANT_MUX_2o3 (1<<15) /* 2o3 in ChipControl 1, bit 15 */
+
+/* 4328 resources */
+#define RES4328_EXT_SWITCHER_PWM 0 /* 0x00001 */
+#define RES4328_BB_SWITCHER_PWM 1 /* 0x00002 */
+#define RES4328_BB_SWITCHER_BURST 2 /* 0x00004 */
+#define RES4328_BB_EXT_SWITCHER_BURST 3 /* 0x00008 */
+#define RES4328_ILP_REQUEST 4 /* 0x00010 */
+#define RES4328_RADIO_SWITCHER_PWM 5 /* 0x00020 */
+#define RES4328_RADIO_SWITCHER_BURST 6 /* 0x00040 */
+#define RES4328_ROM_SWITCH 7 /* 0x00080 */
+#define RES4328_PA_REF_LDO 8 /* 0x00100 */
+#define RES4328_RADIO_LDO 9 /* 0x00200 */
+#define RES4328_AFE_LDO 10 /* 0x00400 */
+#define RES4328_PLL_LDO 11 /* 0x00800 */
+#define RES4328_BG_FILTBYP 12 /* 0x01000 */
+#define RES4328_TX_FILTBYP 13 /* 0x02000 */
+#define RES4328_RX_FILTBYP 14 /* 0x04000 */
+#define RES4328_XTAL_PU 15 /* 0x08000 */
+#define RES4328_XTAL_EN 16 /* 0x10000 */
+#define RES4328_BB_PLL_FILTBYP 17 /* 0x20000 */
+#define RES4328_RF_PLL_FILTBYP 18 /* 0x40000 */
+#define RES4328_BB_PLL_PU 19 /* 0x80000 */
+
+/* 4325 A0/A1 resources */
+#define RES4325_BUCK_BOOST_BURST 0 /* 0x00000001 */
+#define RES4325_CBUCK_BURST 1 /* 0x00000002 */
+#define RES4325_CBUCK_PWM 2 /* 0x00000004 */
+#define RES4325_CLDO_CBUCK_BURST 3 /* 0x00000008 */
+#define RES4325_CLDO_CBUCK_PWM 4 /* 0x00000010 */
+#define RES4325_BUCK_BOOST_PWM 5 /* 0x00000020 */
+#define RES4325_ILP_REQUEST 6 /* 0x00000040 */
+#define RES4325_ABUCK_BURST 7 /* 0x00000080 */
+#define RES4325_ABUCK_PWM 8 /* 0x00000100 */
+#define RES4325_LNLDO1_PU 9 /* 0x00000200 */
+#define RES4325_OTP_PU 10 /* 0x00000400 */
+#define RES4325_LNLDO3_PU 11 /* 0x00000800 */
+#define RES4325_LNLDO4_PU 12 /* 0x00001000 */
+#define RES4325_XTAL_PU 13 /* 0x00002000 */
+#define RES4325_ALP_AVAIL 14 /* 0x00004000 */
+#define RES4325_RX_PWRSW_PU 15 /* 0x00008000 */
+#define RES4325_TX_PWRSW_PU 16 /* 0x00010000 */
+#define RES4325_RFPLL_PWRSW_PU 17 /* 0x00020000 */
+#define RES4325_LOGEN_PWRSW_PU 18 /* 0x00040000 */
+#define RES4325_AFE_PWRSW_PU 19 /* 0x00080000 */
+#define RES4325_BBPLL_PWRSW_PU 20 /* 0x00100000 */
+#define RES4325_HT_AVAIL 21 /* 0x00200000 */
+
+/* 4325 B0/C0 resources */
+#define RES4325B0_CBUCK_LPOM 1 /* 0x00000002 */
+#define RES4325B0_CBUCK_BURST 2 /* 0x00000004 */
+#define RES4325B0_CBUCK_PWM 3 /* 0x00000008 */
+#define RES4325B0_CLDO_PU 4 /* 0x00000010 */
+
+/* 4325 C1 resources */
+#define RES4325C1_LNLDO2_PU 12 /* 0x00001000 */
+
+/* 4325 chip-specific ChipStatus register bits */
+#define CST4325_SPROM_OTP_SEL_MASK 0x00000003
+#define CST4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
+#define CST4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
+#define CST4325_OTP_SEL 2 /* OTP is powered up, no SPROM */
+#define CST4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */
+#define CST4325_SDIO_USB_MODE_MASK 0x00000004
+#define CST4325_SDIO_USB_MODE_SHIFT 2
+#define CST4325_RCAL_VALID_MASK 0x00000008
+#define CST4325_RCAL_VALID_SHIFT 3
+#define CST4325_RCAL_VALUE_MASK 0x000001f0
+#define CST4325_RCAL_VALUE_SHIFT 4
+#define CST4325_PMUTOP_2B_MASK 0x00000200 /* 1 for 2b, 0 for to 2a */
+#define CST4325_PMUTOP_2B_SHIFT 9
+
+#define RES4329_RESERVED0 0 /* 0x00000001 */
+#define RES4329_CBUCK_LPOM 1 /* 0x00000002 */
+#define RES4329_CBUCK_BURST 2 /* 0x00000004 */
+#define RES4329_CBUCK_PWM 3 /* 0x00000008 */
+#define RES4329_CLDO_PU 4 /* 0x00000010 */
+#define RES4329_PALDO_PU 5 /* 0x00000020 */
+#define RES4329_ILP_REQUEST 6 /* 0x00000040 */
+#define RES4329_RESERVED7 7 /* 0x00000080 */
+#define RES4329_RESERVED8 8 /* 0x00000100 */
+#define RES4329_LNLDO1_PU 9 /* 0x00000200 */
+#define RES4329_OTP_PU 10 /* 0x00000400 */
+#define RES4329_RESERVED11 11 /* 0x00000800 */
+#define RES4329_LNLDO2_PU 12 /* 0x00001000 */
+#define RES4329_XTAL_PU 13 /* 0x00002000 */
+#define RES4329_ALP_AVAIL 14 /* 0x00004000 */
+#define RES4329_RX_PWRSW_PU 15 /* 0x00008000 */
+#define RES4329_TX_PWRSW_PU 16 /* 0x00010000 */
+#define RES4329_RFPLL_PWRSW_PU 17 /* 0x00020000 */
+#define RES4329_LOGEN_PWRSW_PU 18 /* 0x00040000 */
+#define RES4329_AFE_PWRSW_PU 19 /* 0x00080000 */
+#define RES4329_BBPLL_PWRSW_PU 20 /* 0x00100000 */
+#define RES4329_HT_AVAIL 21 /* 0x00200000 */
+
+#define CST4329_SPROM_OTP_SEL_MASK 0x00000003
+#define CST4329_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
+#define CST4329_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
+#define CST4329_OTP_SEL 2 /* OTP is powered up, no SPROM */
+#define CST4329_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */
+#define CST4329_SPI_SDIO_MODE_MASK 0x00000004
+#define CST4329_SPI_SDIO_MODE_SHIFT 2
+
+/* 4312 chip-specific ChipStatus register bits */
+#define CST4312_SPROM_OTP_SEL_MASK 0x00000003
+#define CST4312_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
+#define CST4312_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
+#define CST4312_OTP_SEL 2 /* OTP is powered up, no SPROM */
+#define CST4312_OTP_BAD 3 /* OTP is broken, SPROM is present */
+
+/* 4312 resources (all PMU chips with little memory constraint) */
+#define RES4312_SWITCHER_BURST 0 /* 0x00000001 */
+#define RES4312_SWITCHER_PWM 1 /* 0x00000002 */
+#define RES4312_PA_REF_LDO 2 /* 0x00000004 */
+#define RES4312_CORE_LDO_BURST 3 /* 0x00000008 */
+#define RES4312_CORE_LDO_PWM 4 /* 0x00000010 */
+#define RES4312_RADIO_LDO 5 /* 0x00000020 */
+#define RES4312_ILP_REQUEST 6 /* 0x00000040 */
+#define RES4312_BG_FILTBYP 7 /* 0x00000080 */
+#define RES4312_TX_FILTBYP 8 /* 0x00000100 */
+#define RES4312_RX_FILTBYP 9 /* 0x00000200 */
+#define RES4312_XTAL_PU 10 /* 0x00000400 */
+#define RES4312_ALP_AVAIL 11 /* 0x00000800 */
+#define RES4312_BB_PLL_FILTBYP 12 /* 0x00001000 */
+#define RES4312_RF_PLL_FILTBYP 13 /* 0x00002000 */
+#define RES4312_HT_AVAIL 14 /* 0x00004000 */
+
+/* 4322 resources */
+#define RES4322_RF_LDO 0
+#define RES4322_ILP_REQUEST 1
+#define RES4322_XTAL_PU 2
+#define RES4322_ALP_AVAIL 3
+#define RES4322_SI_PLL_ON 4
+#define RES4322_HT_SI_AVAIL 5
+#define RES4322_PHY_PLL_ON 6
+#define RES4322_HT_PHY_AVAIL 7
+#define RES4322_OTP_PU 8
+
+/* 4322 chip-specific ChipStatus register bits */
+#define CST4322_XTAL_FREQ_20_40MHZ 0x00000020
+#define CST4322_SPROM_OTP_SEL_MASK 0x000000c0
+#define CST4322_SPROM_OTP_SEL_SHIFT 6
+#define CST4322_NO_SPROM_OTP 0 /* no OTP, no SPROM */
+#define CST4322_SPROM_PRESENT 1 /* SPROM is present */
+#define CST4322_OTP_PRESENT 2 /* OTP is present */
+#define CST4322_PCI_OR_USB 0x00000100
+#define CST4322_BOOT_MASK 0x00000600
+#define CST4322_BOOT_SHIFT 9
+#define CST4322_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */
+#define CST4322_BOOT_FROM_ROM 1 /* boot from ROM */
+#define CST4322_BOOT_FROM_FLASH 2 /* boot from FLASH */
+#define CST4322_BOOT_FROM_INVALID 3
+#define CST4322_ILP_DIV_EN 0x00000800
+#define CST4322_FLASH_TYPE_MASK 0x00001000
+#define CST4322_FLASH_TYPE_SHIFT 12
+#define CST4322_FLASH_TYPE_SHIFT_ST 0 /* ST serial FLASH */
+#define CST4322_FLASH_TYPE_SHIFT_ATMEL 1 /* ATMEL flash */
+#define CST4322_ARM_TAP_SEL 0x00002000
+#define CST4322_RES_INIT_MODE_MASK 0x0000c000
+#define CST4322_RES_INIT_MODE_SHIFT 14
+#define CST4322_RES_INIT_MODE_ILPAVAIL 0 /* resinitmode: ILP available */
+#define CST4322_RES_INIT_MODE_ILPREQ 1 /* resinitmode: ILP request */
+#define CST4322_RES_INIT_MODE_ALPAVAIL 2 /* resinitmode: ALP available */
+#define CST4322_RES_INIT_MODE_HTAVAIL 3 /* resinitmode: HT available */
+#define CST4322_PCIPLLCLK_GATING 0x00010000
+#define CST4322_CLK_SWITCH_PCI_TO_ALP 0x00020000
+#define CST4322_PCI_CARDBUS_MODE 0x00040000
+
+/* 43224 chip-specific ChipControl register bits */
+#define CCTRL43224_GPIO_TOGGLE 0x8000
+#define CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */
+#define CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */
+
+/* 43236 resources */
+#define RES43236_REGULATOR 0
+#define RES43236_ILP_REQUEST 1
+#define RES43236_XTAL_PU 2
+#define RES43236_ALP_AVAIL 3
+#define RES43236_SI_PLL_ON 4
+#define RES43236_HT_SI_AVAIL 5
+
+/* 43236 chip-specific ChipControl register bits */
+#define CCTRL43236_BT_COEXIST (1<<0) /* 0 disable */
+#define CCTRL43236_SECI (1<<1) /* 0 SECI is disabled (JATG functional) */
+#define CCTRL43236_EXT_LNA (1<<2) /* 0 disable */
+#define CCTRL43236_ANT_MUX_2o3 (1<<3) /* 2o3 mux, chipcontrol bit 3 */
+#define CCTRL43236_GSIO (1<<4) /* 0 disable */
+
+/* 43236 Chip specific ChipStatus register bits */
+#define CST43236_SFLASH_MASK 0x00000040
+#define CST43236_OTP_MASK 0x00000080
+#define CST43236_HSIC_MASK 0x00000100 /* USB/HSIC */
+#define CST43236_BP_CLK 0x00000200 /* 120/96Mbps */
+#define CST43236_BOOT_MASK 0x00001800
+#define CST43236_BOOT_SHIFT 11
+#define CST43236_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */
+#define CST43236_BOOT_FROM_ROM 1 /* boot from ROM */
+#define CST43236_BOOT_FROM_FLASH 2 /* boot from FLASH */
+#define CST43236_BOOT_FROM_INVALID 3
+
+/* 4331 resources */
+#define RES4331_REGULATOR 0
+#define RES4331_ILP_REQUEST 1
+#define RES4331_XTAL_PU 2
+#define RES4331_ALP_AVAIL 3
+#define RES4331_SI_PLL_ON 4
+#define RES4331_HT_SI_AVAIL 5
+
+/* 4331 chip-specific ChipControl register bits */
+#define CCTRL4331_BT_COEXIST (1<<0) /* 0 disable */
+#define CCTRL4331_SECI (1<<1) /* 0 SECI is disabled (JATG functional) */
+#define CCTRL4331_EXT_LNA (1<<2) /* 0 disable */
+#define CCTRL4331_SPROM_GPIO13_15 (1<<3) /* sprom/gpio13-15 mux */
+#define CCTRL4331_EXTPA_EN (1<<4) /* 0 ext pa disable, 1 ext pa enabled */
+#define CCTRL4331_GPIOCLK_ON_SPROMCS (1<<5) /* set drive out GPIO_CLK on sprom_cs pin */
+#define CCTRL4331_PCIE_MDIO_ON_SPROMCS (1<<6) /* use sprom_cs pin as PCIE mdio interface */
+#define CCTRL4331_EXTPA_ON_GPIO2_5 (1<<7) /* aband extpa will be at gpio2/5 and sprom_dout */
+#define CCTRL4331_OVR_PIPEAUXCLKEN (1<<8) /* override core control on pipe_AuxClkEnable */
+#define CCTRL4331_OVR_PIPEAUXPWRDOWN (1<<9) /* override core control on pipe_AuxPowerDown */
+#define CCTRL4331_PCIE_AUXCLKEN (1<<10) /* pcie_auxclkenable */
+#define CCTRL4331_PCIE_PIPE_PLLDOWN (1<<11) /* pcie_pipe_pllpowerdown */
+#define CCTRL4331_BT_SHD0_ON_GPIO4 (1<<16) /* enable bt_shd0 at gpio4 */
+#define CCTRL4331_BT_SHD1_ON_GPIO5 (1<<17) /* enable bt_shd1 at gpio5 */
+
+/* 4331 Chip specific ChipStatus register bits */
+#define CST4331_XTAL_FREQ 0x00000001 /* crystal frequency 20/40Mhz */
+#define CST4331_SPROM_PRESENT 0x00000002
+#define CST4331_OTP_PRESENT 0x00000004
+#define CST4331_LDO_RF 0x00000008
+#define CST4331_LDO_PAR 0x00000010
+
+/* 4315 resources */
+#define RES4315_CBUCK_LPOM 1 /* 0x00000002 */
+#define RES4315_CBUCK_BURST 2 /* 0x00000004 */
+#define RES4315_CBUCK_PWM 3 /* 0x00000008 */
+#define RES4315_CLDO_PU 4 /* 0x00000010 */
+#define RES4315_PALDO_PU 5 /* 0x00000020 */
+#define RES4315_ILP_REQUEST 6 /* 0x00000040 */
+#define RES4315_LNLDO1_PU 9 /* 0x00000200 */
+#define RES4315_OTP_PU 10 /* 0x00000400 */
+#define RES4315_LNLDO2_PU 12 /* 0x00001000 */
+#define RES4315_XTAL_PU 13 /* 0x00002000 */
+#define RES4315_ALP_AVAIL 14 /* 0x00004000 */
+#define RES4315_RX_PWRSW_PU 15 /* 0x00008000 */
+#define RES4315_TX_PWRSW_PU 16 /* 0x00010000 */
+#define RES4315_RFPLL_PWRSW_PU 17 /* 0x00020000 */
+#define RES4315_LOGEN_PWRSW_PU 18 /* 0x00040000 */
+#define RES4315_AFE_PWRSW_PU 19 /* 0x00080000 */
+#define RES4315_BBPLL_PWRSW_PU 20 /* 0x00100000 */
+#define RES4315_HT_AVAIL 21 /* 0x00200000 */
+
+/* 4315 chip-specific ChipStatus register bits */
+#define CST4315_SPROM_OTP_SEL_MASK 0x00000003 /* gpio [7:6], SDIO CIS selection */
+#define CST4315_DEFCIS_SEL 0x00000000 /* use default CIS, OTP is powered up */
+#define CST4315_SPROM_SEL 0x00000001 /* use SPROM, OTP is powered up */
+#define CST4315_OTP_SEL 0x00000002 /* use OTP, OTP is powered up */
+#define CST4315_OTP_PWRDN 0x00000003 /* use SPROM, OTP is powered down */
+#define CST4315_SDIO_MODE 0x00000004 /* gpio [8], sdio/usb mode */
+#define CST4315_RCAL_VALID 0x00000008
+#define CST4315_RCAL_VALUE_MASK 0x000001f0
+#define CST4315_RCAL_VALUE_SHIFT 4
+#define CST4315_PALDO_EXTPNP 0x00000200 /* PALDO is configured with external PNP */
+#define CST4315_CBUCK_MODE_MASK 0x00000c00
+#define CST4315_CBUCK_MODE_BURST 0x00000400
+#define CST4315_CBUCK_MODE_LPBURST 0x00000c00
+
+/* 4319 resources */
+#define RES4319_CBUCK_LPOM 1 /* 0x00000002 */
+#define RES4319_CBUCK_BURST 2 /* 0x00000004 */
+#define RES4319_CBUCK_PWM 3 /* 0x00000008 */
+#define RES4319_CLDO_PU 4 /* 0x00000010 */
+#define RES4319_PALDO_PU 5 /* 0x00000020 */
+#define RES4319_ILP_REQUEST 6 /* 0x00000040 */
+#define RES4319_LNLDO1_PU 9 /* 0x00000200 */
+#define RES4319_OTP_PU 10 /* 0x00000400 */
+#define RES4319_LNLDO2_PU 12 /* 0x00001000 */
+#define RES4319_XTAL_PU 13 /* 0x00002000 */
+#define RES4319_ALP_AVAIL 14 /* 0x00004000 */
+#define RES4319_RX_PWRSW_PU 15 /* 0x00008000 */
+#define RES4319_TX_PWRSW_PU 16 /* 0x00010000 */
+#define RES4319_RFPLL_PWRSW_PU 17 /* 0x00020000 */
+#define RES4319_LOGEN_PWRSW_PU 18 /* 0x00040000 */
+#define RES4319_AFE_PWRSW_PU 19 /* 0x00080000 */
+#define RES4319_BBPLL_PWRSW_PU 20 /* 0x00100000 */
+#define RES4319_HT_AVAIL 21 /* 0x00200000 */
+
+/* 4319 chip-specific ChipStatus register bits */
+#define CST4319_SPI_CPULESSUSB 0x00000001
+#define CST4319_SPI_CLK_POL 0x00000002
+#define CST4319_SPI_CLK_PH 0x00000008
+#define CST4319_SPROM_OTP_SEL_MASK 0x000000c0 /* gpio [7:6], SDIO CIS selection */
+#define CST4319_SPROM_OTP_SEL_SHIFT 6
+#define CST4319_DEFCIS_SEL 0x00000000 /* use default CIS, OTP is powered up */
+#define CST4319_SPROM_SEL 0x00000040 /* use SPROM, OTP is powered up */
+#define CST4319_OTP_SEL 0x00000080 /* use OTP, OTP is powered up */
+#define CST4319_OTP_PWRDN 0x000000c0 /* use SPROM, OTP is powered down */
+#define CST4319_SDIO_USB_MODE 0x00000100 /* gpio [8], sdio/usb mode */
+#define CST4319_REMAP_SEL_MASK 0x00000600
+#define CST4319_ILPDIV_EN 0x00000800
+#define CST4319_XTAL_PD_POL 0x00001000
+#define CST4319_LPO_SEL 0x00002000
+#define CST4319_RES_INIT_MODE 0x0000c000
+#define CST4319_PALDO_EXTPNP 0x00010000 /* PALDO is configured with external PNP */
+#define CST4319_CBUCK_MODE_MASK 0x00060000
+#define CST4319_CBUCK_MODE_BURST 0x00020000
+#define CST4319_CBUCK_MODE_LPBURST 0x00060000
+#define CST4319_RCAL_VALID 0x01000000
+#define CST4319_RCAL_VALUE_MASK 0x3e000000
+#define CST4319_RCAL_VALUE_SHIFT 25
+
+#define PMU1_PLL0_CHIPCTL0 0
+#define PMU1_PLL0_CHIPCTL1 1
+#define PMU1_PLL0_CHIPCTL2 2
+#define CCTL_4319USB_XTAL_SEL_MASK 0x00180000
+#define CCTL_4319USB_XTAL_SEL_SHIFT 19
+#define CCTL_4319USB_48MHZ_PLL_SEL 1
+#define CCTL_4319USB_24MHZ_PLL_SEL 2
+
+/* PMU resources for 4336 */
+#define RES4336_CBUCK_LPOM 0
+#define RES4336_CBUCK_BURST 1
+#define RES4336_CBUCK_LP_PWM 2
+#define RES4336_CBUCK_PWM 3
+#define RES4336_CLDO_PU 4
+#define RES4336_DIS_INT_RESET_PD 5
+#define RES4336_ILP_REQUEST 6
+#define RES4336_LNLDO_PU 7
+#define RES4336_LDO3P3_PU 8
+#define RES4336_OTP_PU 9
+#define RES4336_XTAL_PU 10
+#define RES4336_ALP_AVAIL 11
+#define RES4336_RADIO_PU 12
+#define RES4336_BG_PU 13
+#define RES4336_VREG1p4_PU_PU 14
+#define RES4336_AFE_PWRSW_PU 15
+#define RES4336_RX_PWRSW_PU 16
+#define RES4336_TX_PWRSW_PU 17
+#define RES4336_BB_PWRSW_PU 18
+#define RES4336_SYNTH_PWRSW_PU 19
+#define RES4336_MISC_PWRSW_PU 20
+#define RES4336_LOGEN_PWRSW_PU 21
+#define RES4336_BBPLL_PWRSW_PU 22
+#define RES4336_MACPHY_CLKAVAIL 23
+#define RES4336_HT_AVAIL 24
+#define RES4336_RSVD 25
+
+/* 4336 chip-specific ChipStatus register bits */
+#define CST4336_SPI_MODE_MASK 0x00000001
+#define CST4336_SPROM_PRESENT 0x00000002
+#define CST4336_OTP_PRESENT 0x00000004
+#define CST4336_ARMREMAP_0 0x00000008
+#define CST4336_ILPDIV_EN_MASK 0x00000010
+#define CST4336_ILPDIV_EN_SHIFT 4
+#define CST4336_XTAL_PD_POL_MASK 0x00000020
+#define CST4336_XTAL_PD_POL_SHIFT 5
+#define CST4336_LPO_SEL_MASK 0x00000040
+#define CST4336_LPO_SEL_SHIFT 6
+#define CST4336_RES_INIT_MODE_MASK 0x00000180
+#define CST4336_RES_INIT_MODE_SHIFT 7
+#define CST4336_CBUCK_MODE_MASK 0x00000600
+#define CST4336_CBUCK_MODE_SHIFT 9
+
+/* 4330 resources */
+#define RES4330_CBUCK_LPOM 0
+#define RES4330_CBUCK_BURST 1
+#define RES4330_CBUCK_LP_PWM 2
+#define RES4330_CBUCK_PWM 3
+#define RES4330_CLDO_PU 4
+#define RES4330_DIS_INT_RESET_PD 5
+#define RES4330_ILP_REQUEST 6
+#define RES4330_LNLDO_PU 7
+#define RES4330_LDO3P3_PU 8
+#define RES4330_OTP_PU 9
+#define RES4330_XTAL_PU 10
+#define RES4330_ALP_AVAIL 11
+#define RES4330_RADIO_PU 12
+#define RES4330_BG_PU 13
+#define RES4330_VREG1p4_PU_PU 14
+#define RES4330_AFE_PWRSW_PU 15
+#define RES4330_RX_PWRSW_PU 16
+#define RES4330_TX_PWRSW_PU 17
+#define RES4330_BB_PWRSW_PU 18
+#define RES4330_SYNTH_PWRSW_PU 19
+#define RES4330_MISC_PWRSW_PU 20
+#define RES4330_LOGEN_PWRSW_PU 21
+#define RES4330_BBPLL_PWRSW_PU 22
+#define RES4330_MACPHY_CLKAVAIL 23
+#define RES4330_HT_AVAIL 24
+#define RES4330_5gRX_PWRSW_PU 25
+#define RES4330_5gTX_PWRSW_PU 26
+#define RES4330_5g_LOGEN_PWRSW_PU 27
+
+/* 4330 chip-specific ChipStatus register bits */
+#define CST4330_CHIPMODE_SDIOD(cs) (((cs) & 0x7) < 6) /* SDIO || gSPI */
+#define CST4330_CHIPMODE_USB20D(cs) (((cs) & 0x7) >= 6) /* USB || USBDA */
+#define CST4330_CHIPMODE_SDIO(cs) (((cs) & 0x4) == 0) /* SDIO */
+#define CST4330_CHIPMODE_GSPI(cs) (((cs) & 0x6) == 4) /* gSPI */
+#define CST4330_CHIPMODE_USB(cs) (((cs) & 0x7) == 6) /* USB packet-oriented */
+#define CST4330_CHIPMODE_USBDA(cs) (((cs) & 0x7) == 7) /* USB Direct Access */
+#define CST4330_OTP_PRESENT 0x00000010
+#define CST4330_LPO_AUTODET_EN 0x00000020
+#define CST4330_ARMREMAP_0 0x00000040
+#define CST4330_SPROM_PRESENT 0x00000080 /* takes priority over OTP if both set */
+#define CST4330_ILPDIV_EN 0x00000100
+#define CST4330_LPO_SEL 0x00000200
+#define CST4330_RES_INIT_MODE_SHIFT 10
+#define CST4330_RES_INIT_MODE_MASK 0x00000c00
+#define CST4330_CBUCK_MODE_SHIFT 12
+#define CST4330_CBUCK_MODE_MASK 0x00003000
+#define CST4330_CBUCK_POWER_OK 0x00004000
+#define CST4330_BB_PLL_LOCKED 0x00008000
+#define SOCDEVRAM_4330_BP_ADDR 0x1E000000
+#define SOCDEVRAM_4330_ARM_ADDR 0x00800000
+
+/* 4313 resources */
+#define RES4313_BB_PU_RSRC 0
+#define RES4313_ILP_REQ_RSRC 1
+#define RES4313_XTAL_PU_RSRC 2
+#define RES4313_ALP_AVAIL_RSRC 3
+#define RES4313_RADIO_PU_RSRC 4
+#define RES4313_BG_PU_RSRC 5
+#define RES4313_VREG1P4_PU_RSRC 6
+#define RES4313_AFE_PWRSW_RSRC 7
+#define RES4313_RX_PWRSW_RSRC 8
+#define RES4313_TX_PWRSW_RSRC 9
+#define RES4313_BB_PWRSW_RSRC 10
+#define RES4313_SYNTH_PWRSW_RSRC 11
+#define RES4313_MISC_PWRSW_RSRC 12
+#define RES4313_BB_PLL_PWRSW_RSRC 13
+#define RES4313_HT_AVAIL_RSRC 14
+#define RES4313_MACPHY_CLK_AVAIL_RSRC 15
+
+/* 4313 chip-specific ChipStatus register bits */
+#define CST4313_SPROM_PRESENT 1
+#define CST4313_OTP_PRESENT 2
+#define CST4313_SPROM_OTP_SEL_MASK 0x00000002
+#define CST4313_SPROM_OTP_SEL_SHIFT 0
+
+/* 4313 Chip specific ChipControl register bits */
+#define CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
+
+/* 43228 resources */
+#define RES43228_NOT_USED 0
+#define RES43228_ILP_REQUEST 1
+#define RES43228_XTAL_PU 2
+#define RES43228_ALP_AVAIL 3
+#define RES43228_PLL_EN 4
+#define RES43228_HT_PHY_AVAIL 5
+
+/* 43228 chipstatus reg bits */
+#define CST43228_ILP_DIV_EN 0x1
+#define CST43228_OTP_PRESENT 0x2
+#define CST43228_SERDES_REFCLK_PADSEL 0x4
+#define CST43228_SDIO_MODE 0x8
+
+#define CST43228_SDIO_OTP_PRESENT 0x10
+#define CST43228_SDIO_RESET 0x20
+
+/*
+* Maximum delay for the PMU state transition in us.
+* This is an upper bound intended for spinwaits etc.
+*/
+#define PMU_MAX_TRANSITION_DLY 15000
+
+/* PMU resource up transition time in ILP cycles */
+#define PMURES_UP_TRANSITION 2
+
+/*
+* Register eci_inputlo bitfield values.
+* - BT packet type information bits [7:0]
+*/
+/* [3:0] - Task (link) type */
+#define BT_ACL 0x00
+#define BT_SCO 0x01
+#define BT_eSCO 0x02
+#define BT_A2DP 0x03
+#define BT_SNIFF 0x04
+#define BT_PAGE_SCAN 0x05
+#define BT_INQUIRY_SCAN 0x06
+#define BT_PAGE 0x07
+#define BT_INQUIRY 0x08
+#define BT_MSS 0x09
+#define BT_PARK 0x0a
+#define BT_RSSISCAN 0x0b
+#define BT_MD_ACL 0x0c
+#define BT_MD_eSCO 0x0d
+#define BT_SCAN_WITH_SCO_LINK 0x0e
+#define BT_SCAN_WITHOUT_SCO_LINK 0x0f
+/* [7:4] = packet duration code */
+/* [8] - Master / Slave */
+#define BT_MASTER 0
+#define BT_SLAVE 1
+/* [11:9] - multi-level priority */
+#define BT_LOWEST_PRIO 0x0
+#define BT_HIGHEST_PRIO 0x3
+
+/* WLAN - number of antenna */
+#define WLAN_NUM_ANT1 TXANT_0
+#define WLAN_NUM_ANT2 TXANT_1
+
+#endif /* _SBCHIPC_H */
projects / mv-sheeva.git / blobdiff