Miniport generic portion header file
Revision History:
- Who When What
+ Who When What
-------- ---------- ----------------------------------------------
- Paul Lin 2002-08-01 created
- James Tan 2002-09-06 modified (Revise NTCRegTable)
- John Chang 2004-09-06 modified for RT2600
+ Paul Lin 2002-08-01 created
+ James Tan 2002-09-06 modified (Revise NTCRegTable)
+ John Chang 2004-09-06 modified for RT2600
+ Justin P. Mattock 11/07/2010 Fix some typos
*/
#ifndef __RTMP_H__
#define __RTMP_H__
/* */
/* Some utility macros */
/* */
-#ifndef min
-#define min(_a, _b) (((_a) < (_b)) ? (_a) : (_b))
-#endif
-
-#ifndef max
-#define max(_a, _b) (((_a) > (_b)) ? (_a) : (_b))
-#endif
-
#define GET_LNA_GAIN(_pAd) ((_pAd->LatchRfRegs.Channel <= 14) ? (_pAd->BLNAGain) : ((_pAd->LatchRfRegs.Channel <= 64) ? (_pAd->ALNAGain0) : ((_pAd->LatchRfRegs.Channel <= 128) ? (_pAd->ALNAGain1) : (_pAd->ALNAGain2))))
#define INC_COUNTER64(Val) (Val.QuadPart++)
#define LEAP_ON(_p) (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP)
#define LEAP_CCKM_ON(_p) ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE))
-/* if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */
+/* if original Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */
#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap) \
{ \
if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500) { \
/* Control block (Descriptor) for all ring descriptor DMA operation, buffer must be */
/* contiguous physical memory. char stored the binding Rx packet descriptor */
/* which won't be released, driver has to wait until upper layer return the packet */
-/* before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair */
+/* before giving up this rx ring descriptor to ASIC. NDIS_BUFFER is associated pair */
/* to describe the packet buffer. For Tx, char stored the tx packet descriptor */
/* which driver should ACK upper layer when the tx is physically done or failed. */
/* */
};
struct rt_counter_drs {
- /* to record the each TX rate's quality. 0 is best, the bigger the worse. */
+ /* record each TX rate's quality. 0 is best, the bigger the worse. */
u16 TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
u8 PER[MAX_STEP_OF_TX_RATE_SWITCH];
u8 TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */
/* Packet information for NdisQueryPacket */
/* */
struct rt_packet_info {
- u32 PhysicalBufferCount; /* Physical breaks of buffer descripor chained */
+ u32 PhysicalBufferCount; /* Physical breaks of buffer descriptor chained */
u32 BufferCount; /* Number of Buffer descriptor chained */
u32 TotalPacketLength; /* Self explained */
char *pFirstBuffer; /* Pointer to first buffer descriptor */
/* Power save method control */
typedef union _PS_CONTROL {
struct {
- unsigned long EnablePSinIdle:1; /* Enable radio off when not connect to AP. radio on only when sitesurvey, */
- unsigned long EnableNewPS:1; /* Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. */
+ unsigned long EnablePSinIdle:1; /* Enable radio off when not connected to AP. radio on only when sitesurvey, */
+ unsigned long EnableNewPS:1; /* Enable new Chip power save function . New method can only be applied in chip version after 2872. and PCIe. */
unsigned long rt30xxPowerMode:2; /* Power Level Mode for rt30xx chip */
unsigned long rt30xxFollowHostASPM:1; /* Card Follows Host's setting for rt30xx chip. */
unsigned long rt30xxForceASPMTest:1; /* Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. */
unsigned long TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
unsigned long CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
BOOLEAN EnableBeacon; /* trigger to enable beacon transmission. */
- u8 BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */
- u8 DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */
+ u8 BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter needs to change. */
+ u8 DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter needs to change. */
};
#endif /* RTMP_MAC_USB // */
/*BOOLEAN bAutoTxRateSwitch; */
u8 MinTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */
u8 RtsRate; /* RATE_xxx */
- HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
+ HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operation at Ht rate. */
u8 MlmeRate; /* RATE_xxx, used to send MLME frames */
u8 BasicMlmeRate; /* Default Rate for sending MLME frames */
struct rt_ht_capability_ie HtCapability;
struct rt_add_ht_info_ie AddHTInfo; /* Useful as AP. */
/*This IE is used with channel switch announcement element when changing to a new 40MHz. */
- /*This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. */
+ /*This IE is included in channel switch announcement frames 7.4.1.5, beacons, probe Rsp. */
struct rt_new_ext_chan_ie NewExtChanOffset; /*7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present */
BOOLEAN bHTProtect;
/* GROUP 1 - */
/* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */
/* the user intended configuration, but not necessary fully equal to the final */
- /* settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either */
+ /* settings in ACTIVE BSS after negotiation/compromise with the BSS holder (either */
/* AP or IBSS holder). */
/* Once initialized, user configuration can only be changed via OID_xxx */
u8 BssType; /* BSS_INFRA or BSS_ADHOC */
/* For WPA countermeasures */
unsigned long LastMicErrorTime; /* record last MIC error time */
- unsigned long MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassoiciation). */
+ unsigned long MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassociation). */
BOOLEAN bBlockAssoc; /* Block associate attempt for 60 seconds after counter measure occurred. */
/* For WPA-PSK supplicant state */
WPA_STATE WpaState; /* Default is SS_NOTUSE and handled by microsoft 802.1x */
u8 ReplayCounter[8];
- u8 ANonce[32]; /* ANonce for WPA-PSK from aurhenticator */
+ u8 ANonce[32]; /* ANonce for WPA-PSK from auhenticator */
u8 SNonce[32]; /* SNonce for WPA-PSK */
u8 LastSNR0; /* last received BEACON's SNR */
u8 RSNIE_Len;
u8 RSN_IE[MAX_LEN_OF_RSNIE]; /* The content saved here should be little-endian format. */
- unsigned long CLBusyBytes; /* Save the total bytes received durning channel load scan time */
+ unsigned long CLBusyBytes; /* Save the total bytes received during channel load scan time */
u16 RPIDensity[8]; /* Array for RPI density collection */
u8 RMReqCnt; /* Number of measurement request saved. */
BOOLEAN bForceTxBurst; /* 1: force enble TX PACKET BURST, 0: disable */
};
-/* This data structure keep the current active BSS/IBSS's configuration that this STA */
+/* This data structure keeps the current active BSS/IBSS's configuration that this STA */
/* had agreed upon joining the network. Which means these parameters are usually decided */
-/* by the BSS/IBSS creator instead of user configuration. Data in this data structurre */
+/* by the BSS/IBSS creator instead of user configuration. Data in this data structure */
/* is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. */
/* Normally, after SCAN or failed roaming attempts, we need to recover back to */
/* the current active settings. */
/*Choose 1 from ValidAsWDS and ValidAsCLI to validize. */
BOOLEAN ValidAsCLI; /* Sta mode, set this TRUE after Linkup,too. */
BOOLEAN ValidAsWDS; /* This is WDS Entry. only for AP mode. */
- BOOLEAN ValidAsApCli; /*This is a AP-Client entry, only for AP mode which enable AP-Client functions. */
+ BOOLEAN ValidAsApCli; /* This is a AP-Client entry, only for AP mode which enable AP-Client functions. */
BOOLEAN ValidAsMesh;
BOOLEAN ValidAsDls; /* This is DLS Entry. only for STA mode. */
BOOLEAN isCached;
u8 EnqueueEapolStartTimerRunning; /* Enqueue EAPoL-Start for triggering EAP SM */
/*jan for wpa */
- /* record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB */
+ /* record which entry revoke MIC Failure, if it leaves the BSS itself, AP won't update aMICFailTime MIB */
u8 CMTimerRunning;
u8 apidx; /* MBSS number */
u8 RSNIE_Len;
unsigned long Rt3xxRalinkLinkCtrl; /* USed for 3090F chip */
u16 DeviceID; /* Read from PCI config */
unsigned long AccessBBPFailCount;
- BOOLEAN bPCIclkOff; /* flag that indicate if the PICE power status in Configuration SPace.. */
+ BOOLEAN bPCIclkOff; /* flag that indicates if the PICE power status in Configuration Space.. */
BOOLEAN bPCIclkOffDisableTx; /* */
BOOLEAN brt30xxBanMcuCmd; /*when = 0xff means all commands are ok to set . */
/* ---------------------------- */
u8 RfIcType; /* RFIC_xxx */
unsigned long RfFreqOffset; /* Frequency offset for channel switching */
- struct rt_rtmp_rf_regs LatchRfRegs; /* latch th latest RF programming value since RF IC doesn't support READ */
+ struct rt_rtmp_rf_regs LatchRfRegs; /* latch the latest RF programming value since RF IC doesn't support READ */
- EEPROM_ANTENNA_STRUC Antenna; /* Since ANtenna definition is different for a & g. We need to save it for future reference. */
+ EEPROM_ANTENNA_STRUC Antenna; /* Since Antenna definition is different for a & g. We need to save it for future reference. */
EEPROM_NIC_CONFIG2_STRUC NicConfig2;
/* This soft Rx Antenna Diversity mechanism is used only when user set */
struct rt_common_config CommonCfg;
struct rt_mlme Mlme;
- /* AP needs those vaiables for site survey feature. */
+ /* AP needs those variables for site survey feature. */
struct rt_mlme_aux MlmeAux; /* temporary settings used during MLME state machine */
struct rt_bss_table ScanTab; /* store the latest SCAN result */
/* various Counters */
struct rt_counter_802_3 Counters8023; /* 802.3 counters */
struct rt_counter_802_11 WlanCounters; /* 802.11 MIB counters */
- struct rt_counter_ralink RalinkCounters; /* Ralink propriety counters */
+ struct rt_counter_ralink RalinkCounters; /* Ralink proprietary counters */
struct rt_counter_drs DrsCounters; /* counters for Dynamic TX Rate Switching */
struct rt_private PrivateInfo; /* Private information & counters */
u16 Sequence;
/* Control disconnect / connect event generation */
- /*+++Didn't used anymore */
+ /*+++Not used anymore */
unsigned long LinkDownTime;
/*--- */
unsigned long LastRxRate;
unsigned long ExtraInfo; /* Extra information for displaying status */
unsigned long SystemErrorBitmap; /* b0: E2PROM version error */
- /*+++Didn't used anymore */
+ /*+++Not used anymore */
unsigned long MacIcVersion; /* MAC/BBP serial interface issue solved after ver.D */
/*--- */
unsigned long BulkOutReq;
unsigned long BulkOutComplete;
unsigned long BulkOutCompleteOther;
- unsigned long BulkOutCompleteCancel; /* seems not use now? */
+ unsigned long BulkOutCompleteCancel; /* seems not used now? */
unsigned long BulkInReq;
unsigned long BulkInComplete;
unsigned long BulkInCompleteFail;
struct rt_tx_blk {
u8 QueIdx;
u8 TxFrameType; /* Indicate the Transmission type of the all frames in one batch */
- u8 TotalFrameNum; /* Total frame number want to send-out in one batch */
+ u8 TotalFrameNum; /* Total frame number that wants to send-out in one batch */
u16 TotalFragNum; /* Total frame fragments required in one batch */
- u16 TotalFrameLen; /* Total length of all frames want to send-out in one batch */
+ u16 TotalFrameLen; /* Total length of all frames that wants to send-out in one batch */
struct rt_queue_header TxPacketList;
struct rt_mac_table_entry *pMacEntry; /* NULL: packet with 802.11 RA field is multicast/broadcast address */
/* Following structure used for the characteristics of a specific packet. */
void *pPacket;
u8 *pSrcBufHeader; /* Reference to the head of sk_buff->data */
- u8 *pSrcBufData; /* Reference to the sk_buff->data, will changed depends on hanlding progresss */
+ u8 *pSrcBufData; /* Reference to the sk_buff->data, will change depending on the handling progresss */
u32 SrcBufLen; /* Length of packet payload which not including Layer 2 header */
u8 *pExtraLlcSnapEncap; /* NULL means no extra LLC/SNAP is required */
u8 HeaderBuf[128]; /* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */
u8 apidx; /* The interface associated to this packet */
u8 Wcid; /* The MAC entry associated to this packet */
u8 UserPriority; /* priority class of packet */
- u8 FrameGap; /* what kind of IFS this packet use */
+ u8 FrameGap; /* what kind of IFS does this packet use */
u8 MpduReqNum; /* number of fragments of this frame */
u8 TxRate; /* TODO: Obsoleted? Should change to MCS? */
u8 CipherAlg; /* cipher alogrithm */
unsigned long Priv; /* Hardware specific value saved in here. */
};
-#define fTX_bRtsRequired 0x0001 /* Indicate if need send RTS frame for protection. Not used in RT2860/RT2870. */
-#define fTX_bAckRequired 0x0002 /* the packet need ack response */
-#define fTX_bPiggyBack 0x0004 /* Legacy device use Piggback or not */
-#define fTX_bHTRate 0x0008 /* allow to use HT rate */
-#define fTX_bForceNonQoS 0x0010 /* force to transmit frame without WMM-QoS in HT mode */
-#define fTX_bAllowFrag 0x0020 /* allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment */
-#define fTX_bMoreData 0x0040 /* there are more data packets in PowerSave Queue */
-#define fTX_bWMM 0x0080 /* QOS Data */
-#define fTX_bClearEAPFrame 0x0100
+#define fTX_bRtsRequired 0x0001 /* Indicate if need send RTS frame for protection. Not used in RT2860/RT2870. */
+#define fTX_bAckRequired 0x0002 /* the packet need ack response */
+#define fTX_bPiggyBack 0x0004 /* Legacy device use Piggback or not */
+#define fTX_bHTRate 0x0008 /* allow to use HT rate */
+#define fTX_bForceNonQoS 0x0010 /* force to transmit frame without WMM-QoS in HT mode */
+#define fTX_bAllowFrag 0x0020 /* allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment */
+#define fTX_bMoreData 0x0040 /* there are more data packets in PowerSave Queue */
+#define fTX_bWMM 0x0080 /* QOS Data */
+#define fTX_bClearEAPFrame 0x0100
#define TX_BLK_SET_FLAG(_pTxBlk, _flag) (_pTxBlk->Flags |= _flag)
#define TX_BLK_TEST_FLAG(_pTxBlk, _flag) (((_pTxBlk->Flags & _flag) == _flag) ? 1 : 0)
void IterateOnBssTab(struct rt_rtmp_adapter *pAd);
-void IterateOnBssTab2(struct rt_rtmp_adapter *pAd);;
+void IterateOnBssTab2(struct rt_rtmp_adapter *pAd);
void JoinParmFill(struct rt_rtmp_adapter *pAd,
struct rt_mlme_join_req *JoinReq, unsigned long BssIdx);
projects / mv-sheeva.git / blobdiff