#include "r8192E.h"
#include "r8192E_hw.h"
#include "r819xE_cmdpkt.h"
-/*---------------------------Define Local Constant---------------------------*/
-/* Debug constant*/
-#define CMPK_DEBOUNCE_CNT 1
-/* 2007/10/24 MH Add for printing a range of data. */
-#define CMPK_PRINT(Address)\
-{\
- unsigned char i;\
- u32 temp[10];\
- \
- memcpy(temp, Address, 40);\
- for (i = 0; i <40; i+=4)\
- printk("\r\n %08x", temp[i]);\
-}\
-
-/*---------------------------Define functions---------------------------------*/
-/*-----------------------------------------------------------------------------
- * Function: cmpk_message_handle_tx()
- *
- * Overview: Driver internal module can call the API to send message to
- * firmware side. For example, you can send a debug command packet.
- * Or you can send a request for FW to modify RLX4181 LBUS HW bank.
- * Otherwise, you can change MAC/PHT/RF register by firmware at
- * run time. We do not support message more than one segment now.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/06/2008 amy porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+
+/*
+ * Driver internal module can call the API to send message to
+ * firmware side. For example, you can send a debug command packet.
+ * Or you can send a request for FW to modify RLX4181 LBUS HW bank.
+ * Otherwise, you can change MAC/PHT/RF register by firmware at
+ * run time. We do not support message more than one segment now.
+ */
RT_STATUS cmpk_message_handle_tx(
struct net_device *dev,
u8* code_virtual_address,
#endif
-} /* CMPK_Message_Handle_Tx */
-
-/*-----------------------------------------------------------------------------
- * Function: cmpk_counttxstatistic()
- *
- * Overview:
- *
- * Input: PADAPTER pAdapter - .
- * CMPK_TXFB_T *psTx_FB - .
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-static void
+}
+
+static void
cmpk_count_txstatistic(
struct net_device *dev,
cmpk_txfb_t *pstx_fb)
priv->stats.txretrycount += pstx_fb->retry_cnt;
priv->stats.txfeedbackretry += pstx_fb->retry_cnt;
-} /* cmpk_CountTxStatistic */
-
-
-
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_tx_feedback()
- *
- * Overview: The function is responsible for extract the message inside TX
- * feedbck message from firmware. It will contain dedicated info in
- * ws-06-0063-rtl8190-command-packet-specification. Please
- * refer to chapter "TX Feedback Element". We have to read 20 bytes
- * in the command packet.
- *
- * Input: struct net_device * dev
- * u8 * pmsg - Msg Ptr of the command packet.
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/08/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-static void
+}
+
+
+
+/*
+ * The function is responsible for extract the message inside TX
+ * feedbck message from firmware. It will contain dedicated info in
+ * ws-06-0063-rtl8190-command-packet-specification. Please
+ * refer to chapter "TX Feedback Element". We have to read 20 bytes
+ * in the command packet.
+ */
+static void
cmpk_handle_tx_feedback(
struct net_device *dev,
u8 * pmsg)
or multicast. */
//CountTxStatistics( pAdapter, &tcb );
-} /* cmpk_Handle_Tx_Feedback */
-
-static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- u16 tx_rate;
- {
- //
- // 070117, rcnjko: 87B have to S/W beacon for DTM encryption_cmn.
- //
- if((priv->ieee80211->current_network.mode == IEEE_A) ||
- (priv->ieee80211->current_network.mode == IEEE_N_5G) ||
- ((priv->ieee80211->current_network.mode == IEEE_N_24G) && (!priv->ieee80211->pHTInfo->bCurSuppCCK)))
- {
- tx_rate = 60;
- DMESG("send beacon frame tx rate is 6Mbpm\n");
- }
- else
- {
- tx_rate =10;
- DMESG("send beacon frame tx rate is 1Mbpm\n");
- }
-
- //rtl819xusb_beacon_tx(dev,tx_rate); // HW Beacon
-
- }
-
}
-
-
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_interrupt_status()
- *
- * Overview: The function is responsible for extract the message from
- * firmware. It will contain dedicated info in
- * ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc.
- * Please refer to chapter "Interrupt Status Element".
- *
- * Input: struct net_device *dev,
- * u8* pmsg - Message Pointer of the command packet.
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Add this for rtl8192 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/*
+ * The function is responsible for extract the message from
+ * firmware. It will contain dedicated info in
+ * ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc.
+ * Please refer to chapter "Interrupt Status Element".
+ */
static void
cmpk_handle_interrupt_status(
struct net_device *dev,
priv->ieee80211->bibsscoordinator = false;
priv->stats.txbeaconerr++;
}
-
- if (rx_intr_status.interrupt_status & ISR_BcnTimerIntr)
- {
- cmdpkt_beacontimerinterrupt_819xusb(dev);
- }
-
}
// Other informations in interrupt status we need?
DMESG("<---- cmpk_handle_interrupt_status()\n");
-} /* cmpk_handle_interrupt_status */
-
-
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_query_config_rx()
- *
- * Overview: The function is responsible for extract the message from
- * firmware. It will contain dedicated info in
- * ws-06-0063-rtl8190-command-packet-specification. Please
- * refer to chapter "Beacon State Element".
- *
- * Input: u8 * pmsg - Message Pointer of the command packet.
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+}
+
+
+/*
+ * The function is responsible for extract the message from
+ * firmware. It will contain dedicated info in
+ * ws-06-0063-rtl8190-command-packet-specification. Please
+ * refer to chapter "Beacon State Element".
+ */
static void
cmpk_handle_query_config_rx(
struct net_device *dev,
rx_query_cfg.mask = (pmsg[12] << 24) | (pmsg[13] << 16) |
(pmsg[14] << 8) | (pmsg[15] << 0);
-} /* cmpk_Handle_Query_Config_Rx */
-
-
-/*-----------------------------------------------------------------------------
- * Function: cmpk_count_tx_status()
- *
- * Overview: Count aggregated tx status from firmwar of one type rx command
- * packet element id = RX_TX_STATUS.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+}
+
+
+/*
+ * Count aggregated tx status from firmwar of one type rx command
+ * packet element id = RX_TX_STATUS.
+ */
static void cmpk_count_tx_status( struct net_device *dev,
cmpk_tx_status_t *pstx_status)
{
priv->stats.txbytesunicast += pstx_status->txuclength;
priv->stats.last_packet_rate = pstx_status->rate;
-} /* cmpk_CountTxStatus */
-
-
-
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_tx_status()
- *
- * Overview: Firmware add a new tx feedback status to reduce rx command
- * packet buffer operation load.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+}
+
+
+
+/*
+ * Firmware add a new tx feedback status to reduce rx command
+ * packet buffer operation load.
+ */
static void
cmpk_handle_tx_status(
struct net_device *dev,
/* 2. Use tx feedback info to count TX statistics. */
cmpk_count_tx_status(dev, &rx_tx_sts);
-} /* cmpk_Handle_Tx_Status */
-
-
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_tx_rate_history()
- *
- * Overview: Firmware add a new tx rate history
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+}
+
+
+/* Firmware add a new tx rate history */
static void
cmpk_handle_tx_rate_history(
struct net_device *dev,
priv->stats.txrate.ht_mcs[j][i] += ptxrate->ht_mcs[j][i];
}
-} /* cmpk_Handle_Tx_Rate_History */
-
-
-/*-----------------------------------------------------------------------------
- * Function: cmpk_message_handle_rx()
- *
- * Overview: In the function, we will capture different RX command packet
- * info. Every RX command packet element has different message
- * length and meaning in content. We only support three type of RX
- * command packet now. Please refer to document
- * ws-06-0063-rtl8190-command-packet-specification.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/06/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+}
+
+
+/*
+ * In the function, we will capture different RX command packet
+ * info. Every RX command packet element has different message
+ * length and meaning in content. We only support three type of RX
+ * command packet now. Please refer to document
+ * ws-06-0063-rtl8190-command-packet-specification.
+ */
u32 cmpk_message_handle_rx(struct net_device *dev, struct ieee80211_rx_stats *pstats)
{
// u32 debug_level = DBG_LOUD;
return 1; /* This is a command packet. */
RT_TRACE(COMP_EVENTS, "<----cmpk_message_handle_rx()\n");
-} /* CMPK_Message_Handle_Rx */
+}
projects / mv-sheeva.git / blobdiff