+++ /dev/null
-#ifndef _R819XU_HTTYPE_H_
-#define _R819XU_HTTYPE_H_
-
-
-//------------------------------------------------------------
-// The HT Capability element is present in beacons, association request,
-// reassociation request and probe response frames
-//------------------------------------------------------------
-
-//
-// Operation mode value
-//
-#define HT_OPMODE_NO_PROTECT 0
-#define HT_OPMODE_OPTIONAL 1
-#define HT_OPMODE_40MHZ_PROTECT 2
-#define HT_OPMODE_MIXED 3
-
-//
-// MIMO Power Save Setings
-//
-#define MIMO_PS_STATIC 0
-#define MIMO_PS_DYNAMIC 1
-#define MIMO_PS_NOLIMIT 3
-
-
-//
-// There should be 128 bits to cover all of the MCS rates. However, since
-// 8190 does not support too much rates, one integer is quite enough.
-//
-
-#define sHTCLng 4
-
-
-#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff
-#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00
-#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
-
-
-typedef enum _HT_MCS_RATE{
- HT_MCS0 = 0x00000001,
- HT_MCS1 = 0x00000002,
- HT_MCS2 = 0x00000004,
- HT_MCS3 = 0x00000008,
- HT_MCS4 = 0x00000010,
- HT_MCS5 = 0x00000020,
- HT_MCS6 = 0x00000040,
- HT_MCS7 = 0x00000080,
- HT_MCS8 = 0x00000100,
- HT_MCS9 = 0x00000200,
- HT_MCS10 = 0x00000400,
- HT_MCS11 = 0x00000800,
- HT_MCS12 = 0x00001000,
- HT_MCS13 = 0x00002000,
- HT_MCS14 = 0x00004000,
- HT_MCS15 = 0x00008000,
- // Do not define MCS32 here although 8190 support MCS32
-}HT_MCS_RATE,*PHT_MCS_RATE;
-
-//
-// Represent Channel Width in HT Capabilities
-//
-typedef enum _HT_CHANNEL_WIDTH{
- HT_CHANNEL_WIDTH_20 = 0,
- HT_CHANNEL_WIDTH_20_40 = 1,
-}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
-
-//
-// Represent Extention Channel Offset in HT Capabilities
-// This is available only in 40Mhz mode.
-//
-typedef enum _HT_EXTCHNL_OFFSET{
- HT_EXTCHNL_OFFSET_NO_EXT = 0,
- HT_EXTCHNL_OFFSET_UPPER = 1,
- HT_EXTCHNL_OFFSET_NO_DEF = 2,
- HT_EXTCHNL_OFFSET_LOWER = 3,
-}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
-
-typedef enum _CHNLOP{
- CHNLOP_NONE = 0, // No Action now
- CHNLOP_SCAN = 1, // Scan in progress
- CHNLOP_SWBW = 2, // Bandwidth switching in progress
- CHNLOP_SWCHNL = 3, // Software Channel switching in progress
-} CHNLOP, *PCHNLOP;
-
-// Determine if the Channel Operation is in progress
-#define CHHLOP_IN_PROGRESS(_pHTInfo) \
- ((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE
-
-
-typedef enum _HT_ACTION{
- ACT_RECOMMAND_WIDTH = 0,
- ACT_MIMO_PWR_SAVE = 1,
- ACT_PSMP = 2,
- ACT_SET_PCO_PHASE = 3,
- ACT_MIMO_CHL_MEASURE = 4,
- ACT_RECIPROCITY_CORRECT = 5,
- ACT_MIMO_CSI_MATRICS = 6,
- ACT_MIMO_NOCOMPR_STEER = 7,
- ACT_MIMO_COMPR_STEER = 8,
- ACT_ANTENNA_SELECT = 9,
-} HT_ACTION, *PHT_ACTION;
-
-
-/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */
-typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier{
- SC_MODE_DUPLICATE = 0,
- SC_MODE_LOWER = 1,
- SC_MODE_UPPER = 2,
- SC_MODE_FULL40MHZ = 3,
-}HT_BW40_SC_E;
-
-typedef struct _HT_CAPABILITY_ELE{
-
- //HT capability info
- u8 AdvCoding:1;
- u8 ChlWidth:1;
- u8 MimoPwrSave:2;
- u8 GreenField:1;
- u8 ShortGI20Mhz:1;
- u8 ShortGI40Mhz:1;
- u8 TxSTBC:1;
- u8 RxSTBC:2;
- u8 DelayBA:1;
- u8 MaxAMSDUSize:1;
- u8 DssCCk:1;
- u8 PSMP:1;
- u8 Rsvd1:1;
- u8 LSigTxopProtect:1;
-
- //MAC HT parameters info
- u8 MaxRxAMPDUFactor:2;
- u8 MPDUDensity:3;
- u8 Rsvd2:3;
-
- //Supported MCS set
- u8 MCS[16];
-
-
- //Extended HT Capability Info
- u16 ExtHTCapInfo;
-
- //TXBF Capabilities
- u8 TxBFCap[4];
-
- //Antenna Selection Capabilities
- u8 ASCap;
-
-}__attribute__((packed)) HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE;
-
-//------------------------------------------------------------
-// The HT Information element is present in beacons
-// Only AP is required to include this element
-//------------------------------------------------------------
-
-typedef struct _HT_INFORMATION_ELE{
- u8 ControlChl;
-
- u8 ExtChlOffset:2;
- u8 RecommemdedTxWidth:1;
- u8 RIFS:1;
- u8 PSMPAccessOnly:1;
- u8 SrvIntGranularity:3;
-
- u8 OptMode:2;
- u8 NonGFDevPresent:1;
- u8 Revd1:5;
- u8 Revd2:8;
-
- u8 Rsvd3:6;
- u8 DualBeacon:1;
- u8 DualCTSProtect:1;
-
- u8 SecondaryBeacon:1;
- u8 LSigTxopProtectFull:1;
- u8 PcoActive:1;
- u8 PcoPhase:1;
- u8 Rsvd4:4;
-
- u8 BasicMSC[16];
-}__attribute__((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE;
-
-//
-// MIMO Power Save control field.
-// This is appear in MIMO Power Save Action Frame
-//
-typedef struct _MIMOPS_CTRL{
- u8 MimoPsEnable:1;
- u8 MimoPsMode:1;
- u8 Reserved:6;
-} MIMOPS_CTRL, *PMIMOPS_CTRL;
-
-typedef enum _HT_SPEC_VER{
- HT_SPEC_VER_IEEE = 0,
- HT_SPEC_VER_EWC = 1,
-}HT_SPEC_VER, *PHT_SPEC_VER;
-
-typedef enum _HT_AGGRE_MODE_E{
- HT_AGG_AUTO = 0,
- HT_AGG_FORCE_ENABLE = 1,
- HT_AGG_FORCE_DISABLE = 2,
-}HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E;
-
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variables when card is
-// configured as non-AP STA mode. **Note** Current_xxx should be set
-// to default value in HTInitializeHTInfo()
-//------------------------------------------------------------
-
-typedef struct _RT_HIGH_THROUGHPUT{
-// DECLARE_RT_OBJECT(_RT_HIGH_THROUGHPUT);
- u8 bEnableHT;
- u8 bCurrentHTSupport;
-
- u8 bRegBW40MHz; // Tx 40MHz channel capablity
- u8 bCurBW40MHz; // Tx 40MHz channel capability
-
- u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz
- u8 bCurShortGI40MHz; // Tx Short GI for 40MHz
-
- u8 bRegShortGI20MHz; // Tx Short GI for 20MHz
- u8 bCurShortGI20MHz; // Tx Short GI for 20MHz
-
- u8 bRegSuppCCK; // Tx CCK rate capability
- u8 bCurSuppCCK; // Tx CCK rate capability
-
- // 802.11n spec version for "peer"
- HT_SPEC_VER ePeerHTSpecVer;
-
-
- // HT related information for "Self"
- HT_CAPABILITY_ELE SelfHTCap; // This is HT cap element sent to peer STA, which also indicate HT Rx capabilities.
- HT_INFORMATION_ELE SelfHTInfo; // This is HT info element sent to peer STA, which also indicate HT Rx capabilities.
-
- // HT related information for "Peer"
- u8 PeerHTCapBuf[32];
- u8 PeerHTInfoBuf[32];
-
-
- // A-MSDU related
- u8 bAMSDU_Support; // This indicates Tx A-MSDU capability
- u16 nAMSDU_MaxSize; // This indicates Tx A-MSDU capability
- u8 bCurrent_AMSDU_Support; // This indicates Tx A-MSDU capability
- u16 nCurrent_AMSDU_MaxSize; // This indicates Tx A-MSDU capability
-
-
- // AMPDU related <2006.08.10 Emily>
- u8 bAMPDUEnable; // This indicate Tx A-MPDU capability
- u8 bCurrentAMPDUEnable; // This indicate Tx A-MPDU capability
- u8 AMPDU_Factor; // This indicate Tx A-MPDU capability
- u8 CurrentAMPDUFactor; // This indicate Tx A-MPDU capability
- u8 MPDU_Density; // This indicate Tx A-MPDU capability
- u8 CurrentMPDUDensity; // This indicate Tx A-MPDU capability
-
- // Forced A-MPDU enable
- HT_AGGRE_MODE_E ForcedAMPDUMode;
- u8 ForcedAMPDUFactor;
- u8 ForcedMPDUDensity;
-
- // Forced A-MSDU enable
- HT_AGGRE_MODE_E ForcedAMSDUMode;
- u16 ForcedAMSDUMaxSize;
-
- u8 bForcedShortGI;
-
- u8 CurrentOpMode;
-
- // MIMO PS related
- u8 SelfMimoPs;
- u8 PeerMimoPs;
-
- // 40MHz Channel Offset settings.
- HT_EXTCHNL_OFFSET CurSTAExtChnlOffset;
- u8 bCurTxBW40MHz; // If we use 40 MHz to Tx
- u8 PeerBandwidth;
-
- // For Bandwidth Switching
- u8 bSwBwInProgress;
- CHNLOP ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15.
- u8 SwBwStep;
- //RT_TIMER SwBwTimer;
- struct timer_list SwBwTimer;
-
- // For Realtek proprietary A-MPDU factor for aggregation
- u8 bRegRT2RTAggregation;
- u8 bCurrentRT2RTAggregation;
- u8 bCurrentRT2RTLongSlotTime;
- u8 szRT2RTAggBuffer[10];
-
- // Rx Reorder control
- u8 bRegRxReorderEnable;
- u8 bCurRxReorderEnable;
- u8 RxReorderWinSize;
- u8 RxReorderPendingTime;
- u16 RxReorderDropCounter;
-
-
- // Add for Broadcom(Linksys) IOT. Joseph
- u8 bIsPeerBcm;
-
- // For IOT issue.
- u32 IOTAction;
-}RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
-
-
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variable for "each Sta"
-// when card is configured as "AP mode"
-//------------------------------------------------------------
-
-typedef struct _RT_HTINFO_STA_ENTRY{
- u8 bEnableHT;
-
- u8 bSupportCck;
-
- u16 AMSDU_MaxSize;
-
- u8 AMPDU_Factor;
- u8 MPDU_Density;
-
- u8 HTHighestOperaRate;
-
- u8 bBw40MHz;
-
- u8 MimoPs;
-
- u8 McsRateSet[16];
-
-
-}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY;
-
-
-
-
-
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variable for "each AP"
-// when card is configured as "STA mode"
-//------------------------------------------------------------
-
-typedef struct _BSS_HT{
-
- u8 bdSupportHT;
-
- // HT related elements
- u8 bdHTCapBuf[32];
- u16 bdHTCapLen;
- u8 bdHTInfoBuf[32];
- u16 bdHTInfoLen;
-
- HT_SPEC_VER bdHTSpecVer;
- //HT_CAPABILITY_ELE bdHTCapEle;
- //HT_INFORMATION_ELE bdHTInfoEle;
-
- u8 bdRT2RTAggregation;
- u8 bdRT2RTLongSlotTime;
- bool bdHT1R;
-}BSS_HT, *PBSS_HT;
-
-typedef struct _MIMO_RSSI{
- u32 EnableAntenna;
- u32 AntennaA;
- u32 AntennaB;
- u32 AntennaC;
- u32 AntennaD;
- u32 Average;
-}MIMO_RSSI, *PMIMO_RSSI;
-
-typedef struct _MIMO_EVM{
- u32 EVM1;
- u32 EVM2;
-}MIMO_EVM, *PMIMO_EVM;
-
-typedef struct _FALSE_ALARM_STATISTICS{
- u32 Cnt_Parity_Fail;
- u32 Cnt_Rate_Illegal;
- u32 Cnt_Crc8_fail;
- u32 Cnt_all;
-}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
-
-
-
-#endif //__INC_HTTYPE_H
-
projects / mv-sheeva.git / blobdiff